{
 "format": "takeoffcraft-pack",
 "version": 1,
 "id": "trade.finish-carpentry",
 "name": "Finish carpentry",
 "packVersion": "0.1.0",
 "trade": "Finish carpentry",
 "description": "Base, shoe, chair rail and crown with nails; interior doors cased both sides; window casing, stool and apron; closet shelf and rod; base and wall cabinets with countertop and backsplash. Assemblies only: set your own rates.",
 "author": "CadCraft",
 "license": "CC0-1.0",
 "status": "starter",
 "homepage": "https://getcadcraft.com/addons?kind=pack",
 "csi": [
  "06 22 00",
  "08 14 16",
  "12 32 00"
 ],
 "sources": [
  {
   "id": "awi",
   "title": "Architectural Woodwork Standards",
   "publisher": "Architectural Woodwork Institute (AWI, AWMAC, WI)",
   "url": "https://www.awinet.org/"
  },
  {
   "id": "geometry",
   "title": "Plain geometry: the quantity follows from the measured length, height or area and the stated module (no outside source needed)"
  }
 ],
 "items": [
  {
   "key": "base",
   "type": "linear",
   "csi": "06 22 00",
   "group": "Running trim",
   "sources": [
    "awi",
    "geometry"
   ],
   "assume": [
    "Base 10% waste for copes, miters and short pieces.",
    "Finish nails: one pair per stud, studs 16 in o.c. (1.5 nails per LF)."
   ],
   "note": "Measure the runs; door openings are deducts.",
   "waste": 0,
   "name": "Base molding, 3-1/4 in MDF",
   "unit": "LF",
   "twin": "base-m",
   "components": [
    {
     "name": "Base molding",
     "unit": "LF",
     "formula": "L",
     "waste": 1000
    },
    {
     "name": "Finish nails",
     "unit": "EA",
     "formula": "ceil(L*1.5)",
     "waste": 1000
    }
   ]
  },
  {
   "key": "base-m",
   "type": "linear",
   "csi": "06 22 00",
   "group": "Running trim",
   "sources": [
    "awi",
    "geometry"
   ],
   "assume": [
    "Base 10% waste for copes, miters and short pieces.",
    "Finish nails: one pair per stud, studs 16 in o.c. (1.5 nails per LF)."
   ],
   "note": "Measure the runs; door openings are deducts.",
   "waste": 0,
   "name": "Base molding, 83 mm MDF",
   "unit": "m",
   "twin": "base",
   "components": [
    {
     "name": "Base molding",
     "unit": "m",
     "formula": "L",
     "waste": 1000
    },
    {
     "name": "Finish nails",
     "unit": "EA",
     "formula": "ceil(L*4.9213)",
     "waste": 1000
    }
   ]
  },
  {
   "key": "shoe",
   "type": "linear",
   "csi": "06 22 00",
   "group": "Running trim",
   "sources": [
    "awi",
    "geometry"
   ],
   "assume": [
    "Shoe 10% waste.",
    "Finish nails: one pair per stud, studs 16 in o.c. (1.5 nails per LF)."
   ],
   "note": "Measure the runs; door openings are deducts.",
   "waste": 0,
   "name": "Base shoe / quarter round",
   "unit": "LF",
   "twin": "shoe-m",
   "components": [
    {
     "name": "Base shoe / quarter round",
     "unit": "LF",
     "formula": "L",
     "waste": 1000
    },
    {
     "name": "Finish nails",
     "unit": "EA",
     "formula": "ceil(L*1.5)",
     "waste": 1000
    }
   ]
  },
  {
   "key": "shoe-m",
   "type": "linear",
   "csi": "06 22 00",
   "group": "Running trim",
   "sources": [
    "awi",
    "geometry"
   ],
   "assume": [
    "Shoe 10% waste.",
    "Finish nails: one pair per stud, studs 16 in o.c. (1.5 nails per LF)."
   ],
   "note": "Measure the runs; door openings are deducts.",
   "waste": 0,
   "name": "Base shoe / quarter round (metric)",
   "unit": "m",
   "twin": "shoe",
   "components": [
    {
     "name": "Base shoe / quarter round",
     "unit": "m",
     "formula": "L",
     "waste": 1000
    },
    {
     "name": "Finish nails",
     "unit": "EA",
     "formula": "ceil(L*4.9213)",
     "waste": 1000
    }
   ]
  },
  {
   "key": "chair-rail",
   "type": "linear",
   "csi": "06 22 00",
   "group": "Running trim",
   "sources": [
    "awi",
    "geometry"
   ],
   "assume": [
    "Chair rail 10% waste.",
    "Finish nails: one pair per stud, studs 16 in o.c. (1.5 nails per LF)."
   ],
   "note": "Measure the runs; door openings are deducts.",
   "waste": 0,
   "name": "Chair rail",
   "unit": "LF",
   "twin": "chair-rail-m",
   "components": [
    {
     "name": "Chair rail",
     "unit": "LF",
     "formula": "L",
     "waste": 1000
    },
    {
     "name": "Finish nails",
     "unit": "EA",
     "formula": "ceil(L*1.5)",
     "waste": 1000
    }
   ]
  },
  {
   "key": "chair-rail-m",
   "type": "linear",
   "csi": "06 22 00",
   "group": "Running trim",
   "sources": [
    "awi",
    "geometry"
   ],
   "assume": [
    "Chair rail 10% waste.",
    "Finish nails: one pair per stud, studs 16 in o.c. (1.5 nails per LF)."
   ],
   "note": "Measure the runs; door openings are deducts.",
   "waste": 0,
   "name": "Chair rail (metric)",
   "unit": "m",
   "twin": "chair-rail",
   "components": [
    {
     "name": "Chair rail",
     "unit": "m",
     "formula": "L",
     "waste": 1000
    },
    {
     "name": "Finish nails",
     "unit": "EA",
     "formula": "ceil(L*4.9213)",
     "waste": 1000
    }
   ]
  },
  {
   "key": "crown",
   "type": "linear",
   "csi": "06 22 00",
   "group": "Running trim",
   "sources": [
    "awi",
    "geometry"
   ],
   "assume": [
    "Crown 15% waste (compound cuts and copes).",
    "Finish nails: one pair per stud, studs 16 in o.c. (1.5 nails per LF)."
   ],
   "note": "Measure the runs; door openings are deducts.",
   "waste": 0,
   "name": "Crown molding, 4-1/2 in",
   "unit": "LF",
   "twin": "crown-m",
   "components": [
    {
     "name": "Crown molding",
     "unit": "LF",
     "formula": "L",
     "waste": 1500
    },
    {
     "name": "Finish nails",
     "unit": "EA",
     "formula": "ceil(L*1.5)",
     "waste": 1000
    }
   ]
  },
  {
   "key": "crown-m",
   "type": "linear",
   "csi": "06 22 00",
   "group": "Running trim",
   "sources": [
    "awi",
    "geometry"
   ],
   "assume": [
    "Crown 15% waste (compound cuts and copes).",
    "Finish nails: one pair per stud, studs 16 in o.c. (1.5 nails per LF)."
   ],
   "note": "Measure the runs; door openings are deducts.",
   "waste": 0,
   "name": "Crown molding, 114 mm",
   "unit": "m",
   "twin": "crown",
   "components": [
    {
     "name": "Crown molding",
     "unit": "m",
     "formula": "L",
     "waste": 1500
    },
    {
     "name": "Finish nails",
     "unit": "EA",
     "formula": "ceil(L*4.9213)",
     "waste": 1000
    }
   ]
  },
  {
   "key": "door-int",
   "type": "count",
   "csi": "08 14 16",
   "group": "Doors and trim",
   "sources": [
    "awi"
   ],
   "assume": [
    "Prehung interior door 3 x 6-8 cased both sides: casing per side = 2 legs x 7 ft + a head of 3-1/2 ft = 17.5 LF, both sides 35 LF; 10% waste.",
    "Hinges come with the prehung unit; one lockset and one door stop each.",
    "Shims and finish nails are sundries."
   ],
   "note": "Count each interior door.",
   "waste": 0,
   "name": "Interior door, prehung, cased both sides",
   "unit": "EA",
   "twin": "door-int-m",
   "components": [
    {
     "name": "Prehung interior door unit",
     "unit": "EA",
     "formula": "N",
     "waste": 0
    },
    {
     "name": "Door casing",
     "unit": "LF",
     "formula": "N*35",
     "waste": 1000
    },
    {
     "name": "Lockset, passage or privacy",
     "unit": "EA",
     "formula": "N",
     "waste": 0
    },
    {
     "name": "Door stop",
     "unit": "EA",
     "formula": "N",
     "waste": 0
    }
   ]
  },
  {
   "key": "door-int-m",
   "type": "count",
   "csi": "08 14 16",
   "group": "Doors and trim",
   "sources": [
    "awi"
   ],
   "assume": [
    "Prehung interior door 3 x 6-8 cased both sides: casing per side = 2 legs x 7 ft + a head of 3-1/2 ft = 17.5 LF, both sides 35 LF; 10% waste.",
    "Hinges come with the prehung unit; one lockset and one door stop each.",
    "Shims and finish nails are sundries."
   ],
   "note": "Count each interior door.",
   "waste": 0,
   "name": "Interior door, prehung, cased both sides (metric)",
   "unit": "EA",
   "twin": "door-int",
   "components": [
    {
     "name": "Prehung interior door unit",
     "unit": "EA",
     "formula": "N",
     "waste": 0
    },
    {
     "name": "Door casing",
     "unit": "m",
     "formula": "N*10.668",
     "waste": 1000
    },
    {
     "name": "Lockset, passage or privacy",
     "unit": "EA",
     "formula": "N",
     "waste": 0
    },
    {
     "name": "Door stop",
     "unit": "EA",
     "formula": "N",
     "waste": 0
    }
   ]
  },
  {
   "key": "window-trim",
   "type": "count",
   "csi": "06 22 00",
   "group": "Doors and trim",
   "sources": [
    "awi"
   ],
   "assume": [
    "Window about 3 x 5 ft: casing 2 legs x 5-1/2 ft + head 3-1/2 ft = 14.5 LF; apron 3-1/2 ft; one stool each; 10% waste."
   ],
   "note": "Count each window that gets interior trim.",
   "waste": 0,
   "name": "Window trim: casing, stool and apron",
   "unit": "EA",
   "twin": "window-trim-m",
   "components": [
    {
     "name": "Window casing",
     "unit": "LF",
     "formula": "N*14.5",
     "waste": 1000
    },
    {
     "name": "Apron",
     "unit": "LF",
     "formula": "N*3.5",
     "waste": 1000
    },
    {
     "name": "Window stool",
     "unit": "EA",
     "formula": "N",
     "waste": 0
    }
   ]
  },
  {
   "key": "window-trim-m",
   "type": "count",
   "csi": "06 22 00",
   "group": "Doors and trim",
   "sources": [
    "awi"
   ],
   "assume": [
    "Window about 3 x 5 ft: casing 2 legs x 5-1/2 ft + head 3-1/2 ft = 14.5 LF; apron 3-1/2 ft; one stool each; 10% waste."
   ],
   "note": "Count each window that gets interior trim.",
   "waste": 0,
   "name": "Window trim: casing, stool and apron (metric)",
   "unit": "EA",
   "twin": "window-trim",
   "components": [
    {
     "name": "Window casing",
     "unit": "m",
     "formula": "N*4.4196",
     "waste": 1000
    },
    {
     "name": "Apron",
     "unit": "m",
     "formula": "N*1.0668",
     "waste": 1000
    },
    {
     "name": "Window stool",
     "unit": "EA",
     "formula": "N",
     "waste": 0
    }
   ]
  },
  {
   "key": "closet",
   "type": "linear",
   "csi": "06 22 00",
   "group": "Closets and shelving",
   "sources": [
    "awi",
    "geometry"
   ],
   "assume": [
    "Shelf 12 in and closet rod the length of the run; supports at 4 ft at most plus one per run (a starting figure: heavy loads need closer brackets).",
    "Cleat (ledger) on three walls: back + 2 ft returns = run + 2 ft per run."
   ],
   "note": "Draw each closet run.",
   "waste": 0,
   "name": "Closet shelf and rod",
   "unit": "LF",
   "twin": "closet-m",
   "components": [
    {
     "name": "Shelf board 12 in",
     "unit": "LF",
     "formula": "L",
     "waste": 1000
    },
    {
     "name": "Closet rod",
     "unit": "LF",
     "formula": "L",
     "waste": 1000
    },
    {
     "name": "Shelf and rod brackets",
     "unit": "EA",
     "formula": "ceil(L/4)+N",
     "waste": 0
    },
    {
     "name": "Cleat 1 x 4",
     "unit": "LF",
     "formula": "L+N*2",
     "waste": 1000
    }
   ]
  },
  {
   "key": "closet-m",
   "type": "linear",
   "csi": "06 22 00",
   "group": "Closets and shelving",
   "sources": [
    "awi",
    "geometry"
   ],
   "assume": [
    "Shelf 12 in and closet rod the length of the run; supports at 4 ft at most plus one per run (a starting figure: heavy loads need closer brackets).",
    "Cleat (ledger) on three walls: back + 2 ft returns = run + 2 ft per run."
   ],
   "note": "Draw each closet run.",
   "waste": 0,
   "name": "Closet shelf and rod (metric)",
   "unit": "m",
   "twin": "closet",
   "components": [
    {
     "name": "Shelf board 12 in",
     "unit": "m",
     "formula": "L",
     "waste": 1000
    },
    {
     "name": "Closet rod",
     "unit": "m",
     "formula": "L",
     "waste": 1000
    },
    {
     "name": "Shelf and rod brackets",
     "unit": "EA",
     "formula": "ceil(L/1.2192)+N",
     "waste": 0
    },
    {
     "name": "Cleat 1 x 4",
     "unit": "m",
     "formula": "L+N*0.6096",
     "waste": 1000
    }
   ]
  },
  {
   "key": "cab-base",
   "type": "linear",
   "csi": "12 32 00",
   "group": "Cabinets and tops",
   "sources": [
    "awi",
    "geometry"
   ],
   "assume": [
    "Base cabinets by the linear foot along the wall; countertop 25-1/2 in deep = 2.125 SF per LF; backsplash 4 in = 0.333 SF per LF.",
    "Count sink cutouts and end panels on their own."
   ],
   "note": "Draw the base cabinet runs along the wall.",
   "waste": 0,
   "name": "Base cabinets with countertop and 4 in backsplash",
   "unit": "LF",
   "twin": "cab-base-m",
   "components": [
    {
     "name": "Base cabinets",
     "unit": "LF",
     "formula": "L",
     "waste": 0
    },
    {
     "name": "Countertop",
     "unit": "SF",
     "formula": "L*2.125",
     "waste": 500
    },
    {
     "name": "Backsplash",
     "unit": "SF",
     "formula": "L*0.333",
     "waste": 500
    }
   ]
  },
  {
   "key": "cab-base-m",
   "type": "linear",
   "csi": "12 32 00",
   "group": "Cabinets and tops",
   "sources": [
    "awi",
    "geometry"
   ],
   "assume": [
    "Base cabinets by the linear foot along the wall; countertop 25-1/2 in deep = 2.125 SF per LF; backsplash 4 in = 0.333 SF per LF.",
    "Count sink cutouts and end panels on their own."
   ],
   "note": "Draw the base cabinet runs along the wall.",
   "waste": 0,
   "name": "Base cabinets with countertop and 102 mm backsplash",
   "unit": "m",
   "twin": "cab-base",
   "components": [
    {
     "name": "Base cabinets",
     "unit": "m",
     "formula": "L",
     "waste": 0
    },
    {
     "name": "Countertop",
     "unit": "m²",
     "formula": "L*0.6477",
     "waste": 500
    },
    {
     "name": "Backsplash",
     "unit": "m²",
     "formula": "L*0.1016",
     "waste": 500
    }
   ]
  },
  {
   "key": "cab-wall",
   "type": "linear",
   "csi": "12 32 00",
   "group": "Cabinets and tops",
   "sources": [
    "awi",
    "geometry"
   ],
   "assume": [
    "Wall cabinets by the linear foot; light rail and crown by the run if they are part of the design."
   ],
   "note": "Draw the wall cabinet runs.",
   "waste": 0,
   "name": "Wall cabinets",
   "unit": "LF",
   "twin": "cab-wall-m",
   "components": [
    {
     "name": "Wall cabinets",
     "unit": "LF",
     "formula": "L",
     "waste": 0
    }
   ]
  },
  {
   "key": "cab-wall-m",
   "type": "linear",
   "csi": "12 32 00",
   "group": "Cabinets and tops",
   "sources": [
    "awi",
    "geometry"
   ],
   "assume": [
    "Wall cabinets by the linear foot; light rail and crown by the run if they are part of the design."
   ],
   "note": "Draw the wall cabinet runs.",
   "waste": 0,
   "name": "Wall cabinets (metric)",
   "unit": "m",
   "twin": "cab-wall",
   "components": [
    {
     "name": "Wall cabinets",
     "unit": "m",
     "formula": "L",
     "waste": 0
    }
   ]
  }
 ]
}