Appliances: Residential appliances
Washer and dryer, stacked, front-loading, 27"
Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Appliances: Residential appliances
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 1, published Oct 31, 2026 Published
Front-loading washer with a dryer stacked above it, 27" wide, 30" deep, about 66" tall, each with a round glass door and its own controls. Washer needs hot and cold supply and a 2" standpipe; the dryer needs a 4" vent outdoors. Leave 24" in front.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 685.8 mm (27 in) |
| Depth | 792.5 mm (31.2 in) |
| Height | 1,661.2 mm (65.4 in) |
| Electrical: Volts | 240 |
| Electrical: Phase | 1 |
| Electrical: Amps | 30 |
| Plumbing: Cold water | 3/4" |
| Plumbing: Hot water | 3/4" |
| Plumbing: Direct drain | 2" |
| Remarks | Common nominal size, not any maker's product; check the chosen unit's spec sheet. |
IFC class: IfcElectricAppliance. Body: a mesh.
Attributes as found in the source file (2)
| CC-SET | Home |
| CC-RENDER-PARTS | 0-479 #f4f4f4;480-911 #1c252c/0.85;912-2007 #c3c8ce;2008-2071 #33363a;2072-2103 #1c1d1f |
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 1 | GeometryFirst version, from the CadCraft home set. | CC0 | Published | Oct 31, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.