Plumbing: Plumbing equipment
Water heater, heat pump, 50 gal, 24" × 74"
Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Plumbing: Plumbing equipment
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 1, published Oct 31, 2026 Published
Heat-pump (hybrid) water heater, 50 US gallons, 24" across and 75" tall with its compressor unit on top, needing about 700 cubic feet of air and 30" in front for service, a condensate drain and a 240 V circuit.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 660.4 mm (26 in) |
| Depth | 617.7 mm (24.3 in) |
| Height | 1,981.2 mm (78 in) |
| Electrical: Volts | 240 |
| Electrical: Phase | 1 |
| Electrical: Amps | 30 |
| Plumbing: Cold water | 3/4" |
| Plumbing: Hot water | 3/4" |
| Plumbing: Direct drain | 3/4" |
| Remarks | Common nominal size, not any maker's product; check the chosen unit's spec sheet. |
IFC class: IfcBoiler. Body: a mesh.
Attributes as found in the source file (2)
| CC-SET | Home |
| CC-RENDER-PARTS | 0-479 #f4f4f4;480-879 #9aa1a7;880-959 #b8714a;960-1151 #1f2124;1152-1215 #b39a5a |
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 1 | GeometryFirst version, from the CadCraft home set. | CC0 | Published | Oct 31, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.