CadCraft 0.8 impact map

Read through web-e57 (Apache-2.0) in its own vendor folder, behind one readE57 call, in the cloud worker: every scan with its pose, colour, intensity. A Rust crate can replace it in 0.7 (Track RS moved there).

IFC in and out keeping GlobalIds, property sets and classifications; parameter ↔ property mapping files; BCF for issues; a round-trip report.

The owner on Discord (2026-10-19): BimCraft opens a .ccbundle.zip in 0.7, and every CadCraft app can open one as well. Bundle format docs/spikes/archicad-bundle.md; reader bundle-open.js (BimCraft). Related: DF.12b Archicad bundle.

Shaded, edges and wireframe next to the view cube. Plan, Split and 3D as buttons in the shared toolbar row (today they are commands with keys, and the plan already has a draggable splitter). Part of GH.3 (GitHub getcadcraft/bimcraft#3). Owner approved 2026-10-29; scheduled for 0.9.

Hold Shift, or use a toggle, to keep a measured distance orthogonal. Part of GH.3 (GitHub getcadcraft/bimcraft#3). Owner approved 2026-10-29; scheduled for 0.9.

Changing pitch, overhang, fascia and soffit on a selected roof updates it at once, as one undo step. Part of GH.3 (GitHub getcadcraft/bimcraft#3). Owner approved 2026-10-29; scheduled for 0.9.

Preliminary TJI layout: spacing, direction, series and depth picked from the span, load assumptions stated on the drawing. The manufacturer's tables are loaded by the person (we cannot ship them); the output stays preliminary layout guidance. Part of GH.3 (GitHub getcadcraft/bimcraft#3). Owner approved 2026-10-29; scheduled for 0.9.

A symbol palette so the existing electrical symbols are one click away. Part of GH.3 (GitHub getcadcraft/bimcraft#3). Owner approved 2026-10-29; scheduled for 0.9.

An open, offline set of plumbing plan symbols drawn by us. Part of GH.3 (GitHub getcadcraft/bimcraft#3). Owner approved 2026-10-29; scheduled for 0.9.

Covers Plant 3D and Factory Design Utilities. P&ID symbols, tags and line lists in CadCraft; spec-driven 3D piping and equipment in BimCraft; isometrics. As add-ons. Suggestions 2026-10-26: Asked again on /suggest (#1059 CADWorx-style piping and steel layout, Oct 26; #909 PDMS/E3D/Plant 3D-style piping with isometrics, BOM and IFC, Oct 22). Duplicated by this item.

Covers InfoWorks ICM, InfoWater, XPSWMM and InfoDrainage. Pressure and dynamic routing in CivilCraft on EPA EPANET and SWMM (public domain) as WebAssembly. Owner 2026-10-22: water mains are CV.2; share LD.5 hydraulics.

Character animation and production tracking (Maya, Flow Production Tracking): leave out, or fold into SuperCadCraft’s scope. Suggestions 2026-10-22: Asked on /suggest (#766, Oct 17): entertainment lighting plots, mainly 2D (fixture symbols, rigging plots), 3D a lower priority; the usual program is about £1,620 a year with no way to own it. Track SX 2026-10-27: the lighting-plot ask (#766) moved to SU.766; this item keeps animation and production tracking.

The updater is built but off: it needs your update signing key, a release feed, and decision 10 (checks on by default?). a Discord member asked on Discord. -- We'll allow Studio settings to have on by default and checkmark can be turned off; Will need a "check for updates" - report current and latest version. Discord CSV 2026-10-21: Before it turns on: D7.54 (three updater bugs found 2026-10-21 — the What's new card nags with updates off, the feed lists only Windows x64, errors read as “network”).

Pick the final name for Live / Work together. DECISION (owner, 2026-10-25): "Live TeamWork". To do: rename Studio Live / Work together in Studio, the apps' shell and help, the site copy (Catalog, /studio, /pricing, FAQ) and the language files.

8 hours (current), 1 hour, or until the host ends. DECISION: Allow user to set default in Studio settings, and adjust in advanced options at link creation time. Default 1 hour (owner, 2026-10-25).

Keep the M set in use now, or add S or the full set; where 0.4 P.7 goes.

Which WL items outside BimCraft and CivilCraft become must-haves (the recommended six are in use).

Free only (recommended), or paid with a revenue share: Stripe Connect, tax and payout terms. Moved out of Decision Time 2026-10-17: Free outside add-ons only, as recommended. Paid add-ons with a revenue share stay a separate candidate (PAID-AO).

Confirm the stores list Studio only (recommended). Moved out of Decision Time 2026-10-17: Store listings name Studio only, as recommended. DECISION (owner, 2026-10-25): yes, the stores list CadCraft Studio only.

Set LIVE_PUBLIC=1 and approve the pricing and Catalog copy that goes with it. Moved out of Decision Time 2026-10-17: Ships behind the switch LIVE_PUBLIC (0 now). Setting 1 opens Live invite links.

Change APP_SIGNIN_CHECKS from lab to on, so the sign-in checks and alert mails reach everyone. Moved out of Decision Time 2026-10-17: Ships behind the switch APP_SIGNIN_CHECKS (lab now). Changing it to on sends the sign-in checks and alert mails to everyone.

Set TAKEOFF_PACKS_INSTALL=1 to show "Install in TakeoffCraft" on /addons. Moved out of Decision Time 2026-10-17: Ships behind the switch TAKEOFF_PACKS_INSTALL (unset = off). Setting 1 shows "Install in TakeoffCraft" on /addons.

Join Catalog::apps(), pricing and the trademark tests, or stay a site service.

Who verifies maker accounts and what proof is required.

Add mechanical/parts and structural/steel, and whether common steel sizes become library items. Suggestions 2026-10-26: Asked on /suggest (#961, Oct 24): standard profile, sprocket and similar parts by norm, as AutoCAD Mechanical has them.

Retire the frozen 0.1–0.4 folders that still load libredwg-web, Pyodide or OpenCascade.

The "Phones work too" line for /studio and requirements, and the Play description line.

Per-app style names, missing family members, PartCraft orbit, single-letter keys in the Civil and Steel ribbons.

Live textures in BimCraft’s 3D view, and keeping the 15 entourage items.

Which files in testfiles/dwg-samples may go into public repos.

a Discord member suggests 'CadStudio' as an alternative name.

Decided for now: CadCraft outlines are nested in PartCraft through DXF. A Nesting add-on inside CadCraft would be a new build. Keep it as is, or ask for the add-on.

Taken by the session under rule 9 until you say otherwise: (1) faint planes cannot be clicked; (2) Dimension as you draw is on for existing users too, because new users cannot be told apart; (3) a typed line angle other than 0, 90, 180 or 270 sets the direction but is not dimensioned; (4) Cut into it starts at half the part’s thickness; (5) there is no drag handle on Through all ends or on values an equation drives. All are in the session log’s For the owner section.

Schematic capture and PCB layout would open a non-building market. KiCad is GPL, so no fork (see OLD-GPL); a board editor would be clean-room. Or keep SU.897 (KiCad boards into PartCraft for enclosures) as the whole answer. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Today AI comes from the person's own assistant (MCP), and the 0.7 trace rule is no trained model, no network. Reading old drawings' notes (OCR), phone scans to MEP and sketch recognition would need trained models. Keep the rule, allow local models, or allow a service? Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

The remote connector (AC.3) runs through our relay. Free for every account, limited free use, or part of the Team Cloud Plan? And the privacy wording for what passes through the relay (only the tool calls, never stored). Owner 2026-10-27 ("make it easy to connect to from their AI platforms"). Plan docs/0.8-PART5.md § Connect your AI.

A 2-D triangle mesher and nonlinear magnetostatics with magnets as library scripts; the base for motor design later.

Frame-by-frame video from a saved walkthrough. ModelCraft has it. BimCraft’s shared parts are in, but the button belongs in BimCraft’s Views files: about 0.3 d once you give the go.

Keep IFC's own geometry representations (extrusions, swept solids, Booleans) wherever possible so a model exports compactly and can be edited later; many programs store only a list of faces. Reuse the modeling code from ModelCraft for the family editor. Owner 2026-10-22: planned for 0.7 as part of the family work: the families already write IFC's own solids (0.6); BIM-FAM-MORE keeps that rule, and BIM-FAM-SOLID checks what other IFC files and tessellated imports do. Session bim-07.

Stack-ups run in one direction only (decided for now). Two- and three-direction chains (a stack-up across X and Y, or around an angle) would be a later step.

### Problem Description On standard desktop and laptop resolutions (e.g. 1080p, 1440x900, 1366x768), the top ribbon toolbar (`.cc-tools`) wrapped all tool groups (`File`, `Draw`, `Modify`, `Annotate`, `Parametric`, `Blocks`, `Sheets`, `Edit`, `View`) into 3–5 stacked rows. - This consumed significant vertical space, drastically shrinking the active model drafting canvas. - There was no mechanism to cycle the ribbon to compact states (e.g., small symbols, labels-only, or hidden) familiar to users coming from AutoCAD (`Ctrl+F1`). - There was no user control over ribbon row/layer density (e.g., choosing 1 row, 2 rows, or fluid wrapping). --- ### Diagnosis & Root Cause 1. **Unconstrained Multi-Line Flex Wrapping**: In `app/cadcraft.css`, `.cc-tools` was declared with `flex-wrap: wrap` without horizontal overflow scrolling or height constraints. All 9 tool groups stacked vertically whenever the viewport was narrower than ~2500px. 2. **Absence of Display Mode States & Hotkeys**: No data attribute or state machine existed to toggle between AutoCAD-like ribbon display modes (`full`, `symbols`, `text`, `hidden`), nor a dedicated cycler button or `Ctrl+F1` keyboard shortcut. 3. **Absence of Row Configuration**: Users drafting on different monitor aspect ratios had no setting to lock the ribbon to a single row (preserving maximum canvas height) or 2 rows. 4. **Initial Implementation Regressions Identified**: - **Temporal Dead Zone (TDZ) ReferenceError**: In `app/cadcraft.js`, referencing `ribbonRowsState` within the `settingsDlg` initialization before its `let` declaration caused an uncaught `ReferenceError`. This aborted script execution prior to canvas pointer lis… Opened on GitHub by a Discord member: https://github.com/getcadcraft/cadcraft/issues/1 Discord CSV 2026-10-21: Asked again on Discord (Oct 17–20): icon + label toolbars, a Windows-style layout. Side docking: D7.02.

Asked: users mistake ArtCraft's CADcraft, Tangency Labs' SolidCraft and getcadcraft for one product — “is this an official tool?”, “naming is confusing”, a LinkedIn question (7 mentions, #craft-apps Oct 17, 20; #cadcraft Oct 17; #SolidCraft Oct 17). Many SolidWorks/Fusion asks were really for SolidCraft (12 mentions) — PartCraft is ours. Do: a short FAQ entry and site footer line (which CadCraft this is, what we make, what we don't), a pinned Discord answer to paste, and an About line in Studio. The rename itself is DC.84 (owner). Suggestions 2026-10-22: On /suggest (#718, Oct 15) someone wrote "craftcad: I try to open a file but the software doesn’t work", with no email: likely the same name mix-up.

Owner 2026-10-21 (screenshot of a compact docked layout): let panels and tool rows go compact like a classic engineering app. Several panels stacked in one dock (e.g. a tree above Properties), each with a slim title bar (menu, pin/auto-hide, close), tabs inside a panel group, a small icon toolbar per panel, dense rows, and a Properties grid with collapsible categories, label/value columns and inline sliders and checkboxes. A Compact density in Settings > General for every app; the default layout stays as it is. Built in the shell (app-panels.js) so SuperCadCraft SC.2 reuses it.

Owner 2026-10-21 (screenshot of a drafting ribbon): a ribbon layout in the same spirit, our own design (not a copy). Today the Ribbon menu style draws every button big, one row per group. Add: per group a few large buttons plus the rest stacked three high as small icon + label buttons; split buttons (main action + a small arrow listing its variants, e.g. Line/Polyline, Linear/Aligned dimensions); inline controls where an app has them (CadCraft: current layer list with on/freeze/lock icons, colour / linetype / lineweight By layer lists); group names along the bottom with an arrow opening that group extra tools; works with Compact density (PANEL-COMPACT) and with the toolbar rows setting from CP.1. Data-driven in each app style file (item size, split, control), drawn by the shell app-input-ui.js. Trade dress: our icons, colours and spacing, no copied artwork.

Asked by the proposer (h). Do: craftlib functions and MCP/CLI tools landscape.plant, landscape.grade, landscape.irrigation.check (through Track AS).

Owner 2026-10-22: roads, railroads and other civil, sewer, water. LC.16 covers sewer, storm and some water flows. Idea: pressurised mains with fittings, valves, hydrants, pressure and head loss, sharing LD.5's hydraulics. Order with LC.16.

Owner 2026-10-22: "just like Archicad". Match what its parametric objects DO for a user: a 2D plan symbol you control plus a 3D shape, typed parameters, hotspots you drag in plan and 3D, detail levels, nested objects, loadable libraries. Not its script language or parts: those are proprietary, so none is read, copied or imported (licence gate first if GDL import is ever asked for). In order (what 0.6 has: formulas, solids, Booleans, visibility, preview handles, sizes; map docs/apps/bimcraft-families.md): 1. Typed parameters: angle, integer, true/false, text, material from the project, fill, pen. 2. Its own 2D symbol: plan lines, fills and text drawn in the editor, shown in plan / 3D / both, with a cut-plane rule. 3. Hotspots: points and edges you drag on the placed element in plan and 3D, moving the parameters the formulas bind. 4. Arrays of solids and 2D lines (count and spacing as parameters). 5. Detail levels: coarse / medium / fine, or by scale, for plan, sections and 3D. 6. A family inside another; cycles refused. 7. Sizes from a CSV or spreadsheet; a placed element showing other parts than its size. 8. A loadable family library placed from the plan (touches Library's format: ask its owner first). Geometry stays IFC's own solids (DC.115). Each step: known-answer tests, IFC2X3 and IFC4 round trips, strings, help. SU.461's Archicad walk-through feeds this list.

The Render dialog gets an Engine choice above Mode. Today's Fast and Path tracer become the first two engines (nothing changes for anyone who does not switch); engines that cannot run here are shown with the reason. The choice is saved with the file, and the render queue remembers which engine each job uses. Owner's ask, 2026-10-24. Plan docs/0.8-PART1.md.

One package every outside engine reads: the scene as USD with its textures, plus a small settings file with the camera, size, samples, sun and sky, exposure and the exact material values, so nothing is lost when another program's importer skips a field. Owner's ask, 2026-10-24. Plan docs/0.8-PART1.md.

Help topics for choosing an engine, Blender, Unreal, Open in and writing an engine add-on; Spanish (Mexico), Indonesian and French drafts; the release note with its results. Owner's ask, 2026-10-24. Plan docs/0.8-PART1.md.

Emailed 2026-10-23: “I want to set Drawing Limits. When I write LIMITS in the command line, it says: Invalid parameters for 'LIMITS'. Is there any other ways to set Drawing Limits?” Not covered today: CadCraft has no LIMITS command (a typed LIMITS answers “Unknown command”; the quoted wording is not CadCraft's, so ask which app and version). Limits exist only as DWG/DXF header values and the LISP LIMMIN/LIMMAX variables, which change nothing in the drawing. Wanted: LIMITS with ON / OFF / lower-left / upper-right corners (undoable, in doc.meta), grid drawn inside the limits, ZOOM All to the limits, points outside refused while ON, saved and read in DWG and DXF ($LIMMIN, $LIMMAX, $LIMCHECK), LISP LIMMIN/LIMMAX/LIMCHECK in step, help, en + es-MX, a test.

Emailed 2026-10-21 (Michael Wolff): “Is there a move tool somewhere that I am missing? Or an align tool? If there is not, I would like to file that as a feature request.” Staff answered with CadCraft's MOVE / ALIGN / ALIGNTO / DISTRIBUTE; his reply 2026-10-23: “hitting M only triggers the measure tool in bimcraft. Do I need to be in some special editing mode?” He is right, and the first answer was about the wrong app. BimCraft has no general Move or Align: M is Measure (tools.measure, default key M, DIST/DI/MEASURE). What exists: library items placed from the library move by dragging or by Properties X/Y/rotation (model-move.js), doors and windows slide along their wall, a wall's ends have grips, and a federated model has a Move offset. Missing: pick walls, slabs, columns and other elements and move them by a base point and a second point or a typed distance, move with copy, and align or distribute them, in plan and in 3D, as one undoable model change (travels in Studio Live), with the same typed-prompt feel as CadCraft. Also: the in-app help should say where each app's move lives; the support reply must name the app.

Today the arrow keys are fixed in modelcraft.js: with a tool running they lock X (Right), Y (Left), Z (Up) and the parallel/free direction (Down); otherwise they orbit (Shift pans). Make Lock X / Lock Y / Lock Z / Lock parallel and Orbit/Pan left/right/up/down commands in input-modelcraft.js with the arrows as default keys, so Settings › ModelCraft › Customize can move them to any key (e.g. the left hand side of the keyboard). The shell lets the arrows pass today (app-input-ui.js PASS); a style that rebinds them must win while the old default keeps working for everyone else. Asked on Discord (2026-10-25) by a member moving from a push-pull modeler; owner: add to 0.8.

Orbit always turns about the view target (camera.js), while zoom already aims at the point under the pointer. Push-pull modelers orbit about what is under the pointer, which is why ours feels "slidey". Pick the pivot under the pointer at the start of an orbit (fall back to the target over empty space), show it, and add orbit speed and pan speed next to Zoom speed in Settings › Mouse. Asked on Discord (2026-10-25) by a member moving from a push-pull modeler; owner: add to 0.8.

One Preferences dialog for the app's own settings (units defaults, keys and mouse, drawing, files, view), and a Model Info dialog for what is saved in the file (units and precision, dimensions and text styles, location and north, credits, statistics, components). Gather the settings that are spread around today; add the defaults architects change most. Asked on Discord (2026-10-25) by a member moving from a push-pull modeler; owner: add to 0.8.

Place a PNG or JPEG picture (a scanned plan, a sketch, a site photo, an aerial) under a level's plan, scale it by two points and a distance, move, rotate, fade and lock it, draw over it, and keep it with the model. Today a picture can only be traced into walls. Commercial license inquiry, pasted by the owner 2026-10-27 ("add this to 0.8"). Plan docs/0.8-PART4.md § D8.8.

Pick the map projection from the full list (every UTM zone and EPSG system, by number or name) instead of a short list, and add your own: paste a projection definition, or load a .prj file, for plans drawn on a custom projection. Used for the model's location, map layers, point clouds and terrain, and saved in the model. Discord 2026-10-27, owner: "add 0.8". Plan docs/0.8-PART4.md § D8.9.

A metric user opened BimCraft in the browser and saw every number in feet and inches. The switches in Settings › General › Units only chose which units the toolbar list offered, so turning imperial off changed nothing on screen, and a browser set to US English always started in feet and inches. Now BimCraft shows only a unit that is turned on: with feet and inches off it moves to millimetres (or the starred unit), at once and also over a saved choice. The toolbar unit list still switches at any time. Not changed: a person who never opens Settings still starts in feet and inches when the browser says US English. Ready in /lab; a point release for 0.7 was not needed (the toolbar list is the way round).

Settings › General › Full-screen crosshair: one switch for all eight apps. Two thin lines through the pointer run edge to edge across the drawing or view under it, so you can check by eye that two things line up; toolbars, cards and hints over the view stay on top, and nothing changes with a finger. CadCraft draws it itself (in the active pane of a split view, following the UCS) and also has it as a fourth cursor size, Full screen, set by CURSORSIZE as in AutoCAD: 100 is full screen, a smaller number picks the nearest size (under 5 Small, 5–9 Medium, 10–99 Large). Discord 2026-10-30 (a Discord member, from the other CadCraft channel), owner: "need another feature added to 0.8 now", then "allow the fullscreen crosshairs on all apps". Built 2026-10-30, ready in /lab; plan docs/0.8-PART4.md § D8.14.

A Copy area tool in MarkupCraft. Pick a shape (rectangle, circle/ellipse, freeform with the lasso), then a small bar offers: include markups on/off, resolution (screen, 150 or 300 dpi), Copy, and Copy as overlay. Copy puts a PNG of that part of the page on the system clipboard (outside a circle or freeform is see-through, not white), so it pastes into Word, email, other PDF and drawing apps; MarkupCraft also keeps its own clip with the source file, page, scale and area. Copy as overlay makes the paper see-through (near-white pixels clear), with an opacity (default 50%) and an optional one-colour tint so it stands out over another drawing. Pasted in MarkupCraft it becomes an image markup that follows the pointer until placed, then moves, turns, locks and keeps its opacity in the property panel. Save as PNG for apps that drop transparency on paste. Decided while building: the area is copied as a picture, not the PDF's vector lines (the Content tool's copy keeps vectors); a big area at a high resolution is lowered in dpi until the PNG is under 3 MB, the cap was not raised. The size travels between our apps through localStorage (same site), so CadCraft, BimCraft and DetailCraft paste it at the drawing's real size when the sheet had a scale. Built 2026-10-30, ready in /lab: MarkupCraft Edit › More › Copy an area of the page… (Copy, Copy as overlay, Save as PNG) and Line up a picture with two points; CadCraft PASTEAREA (picture at real size, DWG IMAGE with transparency); BimCraft Ctrl+V on a plan (D8.8 picture at true size); DetailCraft reference pictures on a level. Plan and test results: docs/0.8-PART4.md § D8.15. A user's ask, passed on by the owner 2026-10-30 ("add it now", then "build the whole thing").

Building regulations by jurisdiction, kept in the library so they stay current outside the apps: a corrected limit or new edition is a new library version, not an app release. Full note: docs/0.8-ZA-STANDARDS.md section 1a. Granularity: country first (ISO 3166-1), later state (ISO 3166-2), county or district, city. Each level inherits the one above and can add, change or remove single rules; the report says where each rule came from. A pack is data only, never code: rules (applies to, comparison, value with unit, clause number, our own label), defaults, edition and dates. An ADD-ON, not part of the apps (owner: not in every app): the bundled BimCraft add-on 'Building regulations', off until switched on. Packs will be a Library item kind so people can submit their own; the doc lists the decisions (trust, who may publish a reference pack, copyright, pinned versions). BUILT in /lab (2026-10-25), first slice: the add-on (add-on API 1.2 hook), the pack format, a US (IRC 2021) pack and a South African sample, a Settings section, stairs that follow the pack, a Building regulations schedule. Packs are files beside the add-on for now. LEFT: the Library kind and submissions, pinned versions per project, state/county/city packs, other apps, a check report with sources. The South African numbers are UNCHECKED.

Asked: a version for older operating systems such as macOS Sierra, so old computers that still work can draw (#1061, Oct 26). Do: find the real floor today for each way to run the apps (web edition: oldest Safari / Chrome / Firefox that runs the apps and WebGL; Studio on macOS, Windows 10, Linux), state it on /download and in the help, and list what a person on something older can still do (the web edition in a current browser, or older releases). No promise of a build for systems the web view no longer supports.

Asked: draw cabinets (DWG based), print reports and generate G-code for the CNC with printed labels (#1035, Oct 25). Related: window builder (#874), CAM/CAD (#875, #886). The parts exist: product configurators (LC.14), nesting with offcuts (LC.17, SU.755), CAM posts (LC.15), labels. Missing: the cabinet itself. Do: an add-on with cabinet boxes (base, wall, tall; doors, drawers, shelves) drawn from a plan in CadCraft, a cut list and edge-banding report, nesting onto sheets, G-code per sheet, a label per part. Owner decides whether it is an add-on we build (DEC-10).

Asked: a project setting "Plumbing standard: US / Brazil (ABNT)" so every new pipe run starts with that standard’s materials, sizes and slopes; today the standard follows the material picked (#955, Oct 23, from the contributor of the plumbing PRs #7–#12, CONTRIB-1024). They offered to send the PR. Do: accept the PR if it follows CONTRIBUTING (setting in Project, defaults per standard, runs and fixtures follow it, tests), and answer on GitHub.

Asked: process drone point clouds the way a reality-capture program does, then make surfaces and contours (#935, Oct 23). Today: clouds open (PLY, PCD, PTX, LAS; E57 partly, PF.1) and register (LC.3), and CivilCraft builds a ground TIN with contours from survey points (tin.js), but no step goes from cloud to ground. Do: thin the cloud to a grid, separate ground from objects (cloth or slope filter, with settings you can see), build the TIN, contours at your interval, volumes against a design surface; works on 50+ million points through the existing chunked reader.

Asked: non-uniform scale so a pattern can be made bigger than the part to allow for shrinkage after casting (#934, Oct 23). Do: Scale takes X, Y and Z factors (and a percentage per axis), on a solid or a selection, about a chosen point; PartCraft keeps the feature in the tree so the factor can be edited later; a "shrinkage allowance" preset (percent per axis, e.g. 1.5 %) next to it.

Asked: type a line by bearing in degrees, minutes and seconds, e.g. 20 m at N45°23'E, to lay out lots (#932, Oct 23). Today CivilCraft’s traverse reads bearings; the CadCraft command line does not. Do: quadrant-bearing input (N/S d°m's"E/W, also d-m-s and decimals) wherever a direction is asked (LINE at a direction, polar, DIST), a BEARING display option on the status line and in the Properties panel, and a setting for angle format (decimal / DMS / surveyor).

Asked: a program that prints larger models by splitting them, but not at that price (#929, Oct 22); the same maker’s licence tied to a USB stick (#918, Oct 22, duplicate). Today: LC.21 repairs, hollows and adds supports and walls for a print. Missing: cutting. Do: split a solid or mesh by a plane (or into a grid that fits the printer’s bed), add interlocking keys, pegs or dovetails with a clearance you set, number every part and print its number on the cut face, an assembly picture, and keep the split editable in PartCraft. No licence server, no USB key.

Asked (#914, Oct 22): (1) a retaining wall as a pad edge, height read from the ground along it; (2) cut and fill shaded by depth in plan and 3D with spot levels; (3) a section line drawn anywhere, for council drawings; (4) sloped pads for driveways and ramps; (5) a swell factor on cut. Checked 2026-10-26: (5) exists in the mass-haul tool (shrink and swell factors; masshaul.js), so only a hint on the grading dialog is missing; the platform side of LD.3 (pads, swales, berms) is the base. Do (1)–(4). Gives LC.1 Site concept the platform for the building.

Asked: Vectorworks-style 2D organisation: design layers say where an element belongs, classes say what it is and how it looks; one true-scale drawing, several viewports at different scales each with its own class visibility and graphic overrides; one tool to publish the whole set to PDF and DWG (#912, Oct 22). Also #933 (Vectorworks’ 2D tools, too expensive, Oct 23) and #930/#1055. Checked 2026-10-26: sheet sets already number, title and publish layouts from many drawings as one PDF (sheetset.js). Missing: classes as a second axis next to layers, per-viewport class overrides, and DWG out in the same batch. Owner decides how far from AutoCAD’s layer model this goes.

Asked: a surveyor gives a contour map with elevations but no coordinates, so a point cloud is hard; build terrain from the contours (#911, Oct 22). Today TIN contours come out of a surface (tin.js) and DXF polylines can carry an elevation. Do: make a ground surface from contour polylines (a polyline’s elevation, or typed per line with a start / interval pick), use them as breaklines, flag crossing or duplicate contours, scale and place a contour map from an image or PDF (D7.24) by two known points.

Asked: live sessions for MarkupCraft so several people review a drawing and leave markup together, for faster approvals (#910, Oct 22). Live co-editing runs in the other apps (Studio Live, DC.23 edit log); MarkupCraft does not join. Do: MarkupCraft joins a Live session (LAN code / invite link), shows each reviewer’s cursor and colour, merges markups from different people without overwriting, keeps who wrote what in the markup list, and exports the reviewed PDF.

Asked: a tagging system for the relational requirements of an architectural project, connected to outputs for schedules (#915, Oct 22). Today BimCraft reads and writes IFC property sets and builds schedules from them. Missing: a way to define your own tag (name, type, allowed values), put it on elements in bulk, and use it in schedule columns, filters and groups. Owner chooses between property sets as the model and a lighter tag layer.

Asked (#1055, Oct 25; #930, Oct 22, duplicate): from Archicad, Trace Reference of any view, more fluid 3D design, multi-format point clouds, OBJ import; from Revit, pen and line overrides, and editing stairs as families from a sketch. Checked 2026-10-26: point clouds come in PLY / PCD / PTX / LAS (E57 partly, PF.1), views, crops and callouts are built (DF.19, DC.117), families are on IFC types (DC.114) and being deepened (BIM-FAM-MORE). Missing: Trace Reference of another view, per-view pen and line overrides, OBJ import in BimCraft, a stair family from a sketch. See SU.461.

Asked: open-source engineering software for hydraulic work, first pick river hydraulics and flood simulation on Linux, next to numerical computing and GIS (#958, #957 duplicate, Oct 24). Today: pipe networks (LC.16, CV.2), irrigation hydraulics (LD.5), map layers. Do first: a 1D steady-flow river model on cross-sections cut from the terrain (standard-step water surface, Manning’s n by zone, bridges and culverts later), flood extents drawn on the plan, a report with every assumption. Needs known-answer tests against published examples and an engineer’s review before it leaves /lab.

Asked: entertainment lighting plots, mainly 2D (fixture symbols, rigging plots), 3D later; the usual program costs about £1,620 a year with no way to own it (#766, Oct 17). Moved here from LC.11 on 2026-10-27 (LC.11 is animation and production tracking). Do: fixtures as blocks with attributes (unit, channel, address, purpose, colour, wattage) hung on pipes/truss positions, auto-numbering along a position, instrument schedule and channel hookup (CSV/XLSX), an open symbol pack drawn by us, a legend; classes from SU.912.

Asked: a PVC and aluminium window builder (#874, Oct 20). Do: profile systems as data (frame, sash, mullion, bead with deductions), a window from an opening and its divisions, angle cut list, 1D bar optimisation on stock lengths, glass sizes, reinforcement and hardware list, labels through the shared lib/cutlist, elevation drawn. Profile data ours or from makers with permission.

Asked: Robot and Microsoft Project in the collection (#931, Oct 22); the structural half is SU.878 / SU.1056. Do: BimCraft's 4D schedule (WL.6) gains a Gantt view, import and export of the open MSPDI XML and CSV, dependencies (FS/SS/FF/SF) and a critical path.

Asked: an MEP modeller with fan coils, mono and multi split systems and ducts (#888, Oct 21). 3D MEP itself is built (LC.9, 0.7). Do: an equipment pack for the MEP add-on: wall, cassette and ducted indoor units, outdoor units, 2/4-pipe fan coils with ports (liquid, gas, condensate, water, duct), refnet joints, line sets sized from a table.

Asked: electrical CAD, harnessing, piping and instrumentation for factory design (#892, Oct 21). P&ID is LC.5's `pid` add-on (built 0.7). Do: wires with ids, colours and gauges between device terminals; a harness drawing with bundles, branches and lengths; wire list and connector tables; a cabinet panel layout with DIN rails and ducts.

Asked: a structural simulation tool like ANSYS, on open solvers such as CalculiX or Code_Aster (#891, Oct 21). Checked 2026-10-27: PartCraft solves static, modal, thermal, buckling and laminar flow on tets (sim.js). Do: bonded and frictionless contact between assembly parts, a bilinear elastic-plastic material with load steps, and export to CalculiX .inp with .frd results read back. Explicit dynamics is not planned.

Asked: AI that learns your work and gets more useful with each takeoff (#811, Oct 19). No trained model and no network (the owner's condition for 0.7 trace). Do: learn from what you accept: symbol templates from confirmed counts (autocount's matcher), "same as last job" condition sets, assemblies ranked by use, repeat a marked pattern on every page; all kept in the project, with a list of what it learned that you can clear.

Asked: select the vector linework in a PDF to make takeoffs quicker (#880, Oct 20). Snapping to PDF linework exists (snap.js). Do: a click on a line takes the whole connected path (segments chained at shared ends) as a length; a click inside a closed path takes it as an area; Shift adds, Tab cycles candidates.

Asked (Japanese, #883, Oct 20): draw system, wiring and piping diagrams from Mermaid, PlantUML or D2 text or from-to data; later by language through MCP. Do: CadCraft pastes Mermaid flowcharts, a PlantUML subset, D2, or a from-to CSV and lays out blocks and orthogonal connectors (editable after); the same as an MCP tool `diagram_from_text` (Track AS); single-line and piping lists use the Electrical and `pid` symbols.

Asked: a template system for project text documents connected to IFC for quantities, descriptions and calculations (#889, Oct 21). Do: templates (Markdown with fields like quantities by type, tag values, loops over elements) render a specification or description to PDF/DOCX from the open IFC; per-trade templates in the Library; reads SU.915's tags, no fields of its own.

Asked: concept-to-prototype NURBS and class-A surface modelling, large assemblies (#747, #748, #749, #750, Oct 16). The 0.7 spike SU.747 sized this (docs/spikes/SU.747.md): S1 = curves (degree, CVs, knots), untrimmed surfaces (loft, sweep, network, blend), measured G0–G2 continuity with PartCraft's zebra and curvature; its first 25 days don't touch the kernel. Trimming and the kernel half wait on D7.45's go/no-go.

Asked: an open alternative to the IC mask design tools (#752, Oct 16). Not a new app (owner can overrule). Spike: read the GDSII stream format (open, documented) into CadCraft as layers for viewing and measuring; no simulation; write up what an editor would take.

Our own field kernel (lib/field): parts as a fine voxel distance field, built from meshes or formulas (gyroids and other lattice surfaces), joined, cut, shelled and blended, then turned back into a closed, printable mesh. Same inputs give the same result every time. Discord request, owner put it on 0.8 on 2026-10-27. Plan docs/0.8-PART3.md.

CraftScript, Lua and Python get field values and builtins: lattice surfaces, beams, channels along a path, booleans, and turning a field into a body. Discord request, owner put it on 0.8 on 2026-10-27. Plan docs/0.8-PART3.md.

A generator script becomes a feature in the part with its own inputs form; change an input and the part is rebuilt like any other feature. Discord request, owner put it on 0.8 on 2026-10-27. Plan docs/0.8-PART3.md.

Unit-checked engineering calculations as readable scripts: pipe and channel flow, heat transfer, wall thickness under pressure, nozzle flow and material data. Every value says which textbook formula it came from. Discord request, owner put it on 0.8 on 2026-10-27. Plan docs/0.8-PART3.md.

Ready-made generators that size a part from requirements: a gyroid heat exchanger, a graded lattice bracket, flow-sized manifolds and a textbook nozzle with cooling channels, each with a data sheet. Discord request, owner put it on 0.8 on 2026-10-27. Plan docs/0.8-PART3.md.

Process profiles (FDM, SLA, SLS, metal powder bed) with minimum walls, holes, overhangs and powder drains; generators follow them and the 3D print check confirms the result. Discord request, owner put it on 0.8 on 2026-10-27. Plan docs/0.8-PART3.md.

A data sheet (JSON and PDF) with every computed value, the field and properties as VTK files for ParaView and analysis tools, and 3MF with lattice data. Discord request, owner put it on 0.8 on 2026-10-27. Plan docs/0.8-PART3.md.

A generator can run PartCraft's Simulation, Thermal and Flow on its result and adjust the design until it fits, for example resizing a heat exchanger until the pressure drop is in range. Discord request, owner put it on 0.8 on 2026-10-27. Plan docs/0.8-PART3.md.

A workspace for generators: pick one, fill in the requirements, run it, read the data sheet and checks, and save the outputs. Generators can also come as add-ons. Discord request, owner put it on 0.8 on 2026-10-27. Plan docs/0.8-PART3.md.

Make sure the portable Windows Studio keeps every setting, add-on and generator in its own folder and asks before any device access; a Linux portable mode; a help page listing what is written where. Discord request, owner put it on 0.8 on 2026-10-27. Plan docs/0.8-PART3.md.

Help for fields, writing a generator, the engineering library, data sheets and portable use; Spanish (Mexico), Indonesian and French drafts; the release note with the same-result, watertight and speed results. Discord request, owner put it on 0.8 on 2026-10-27. Plan docs/0.8-PART3.md.

The field kernel writes a part's field as an OpenVDB level set (.vdb), the sparse format renderers, simulation and 3D programs read. Every add-on built on the field engine can use it; in Engineer it is a Level set (.vdb) button in Data out. Checked with OpenVDB's own reader: every sampled value, the active voxels and the bounds read back exactly. Discord follow-up from the requester, owner's go on 2026-10-29. Plan docs/0.8-PART3.md.

One shared engine for trackpads, mouse side buttons, pens, touch taps, 3D mice, game controllers and MIDI controllers: settings for every app, or kept for one app; files to share them; tells a trackpad from a mouse wheel. Owner's request 2026-10-27. Plan docs/0.8-PART4.md.

Two-finger scroll can pan, zoom or orbit; a pinch can be turned off; the mouse back and forward buttons run commands instead of leaving the app; a 3D mouse (6 axes), a game controller and MIDI knobs pan, zoom and orbit, and their buttons run commands. Owner's request 2026-10-27. Plan docs/0.8-PART4.md.

Settings › Global › Input devices: a card per device, every app or only this app, any command on any button, MIDI controls learned by touching them, export and import. Owner's request 2026-10-27. Plan docs/0.8-PART4.md.

The pen's side button and eraser end and the two- and three-finger taps can run any command (they could only undo and redo), in every app or one app. Owner's request 2026-10-27. Plan docs/0.8-PART4.md.

Each app's 2D and 3D views can be moved by any device: CadCraft, BimCraft, ModelCraft, MarkupCraft, TakeoffCraft, CivilCraft, DetailCraft and PartCraft. Owner's request 2026-10-27. Plan docs/0.8-PART4.md.

A help topic in every app, Spanish (Mexico) draft, and tests of the engine, the settings and every app's views. Owner's request 2026-10-27. Plan docs/0.8-PART4.md.

Size ducts by equal friction or velocity and pipes by flow or plumbing fixture units, and show the pressure drop along a run, on the 3D MEP elements and in the HVAC and piping add-ons. Defaults labelled for professional review. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Route cable tray and conduit in 3D, see the fill percentage of each run, and fill it from the Electrical add-on's cable list. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Place sprinkler heads by hazard class and spacing, draw branch lines and mains, and run a hydraulic calculation (Hazen-Williams, density over the design area) with a report. Values from the standard typed by the person; defaults labelled for professional review. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Load luminaires from IES or LDT photometric files, place them, and calculate illuminance grids on rooms and site areas with average, minimum and uniformity, shown as numbers and colour, with a report. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Check spread and combined footings, mats, pile groups and retaining walls: bearing, sliding, overturning and reinforcement, from the structure's reactions, with the clauses cited. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Frame walls, floors and roofs from BimCraft elements in timber or light-gauge steel (studs, plates, headers, joists, rafters), with cut lists and panel shop drawings. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Drive a joint of an assembly through its travel, watch the parts move, find collisions and the smallest clearance along the way, and plot position and speed. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Slice a part or a print-prepared model into G-code: layers, perimeters, infill, the supports from LC.21, printer profiles. Spike first: our own slicer, or a clean 3MF hand-off to a slicer the person has. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Enter boring logs, draw soil profiles between borings along a section, check slope stability (Bishop simplified) on cut and fill slopes, and estimate settlement under a load. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Design intersections and curb returns where corridors meet, place pavement striping and signs along a corridor, with quantities. Signal timing is not part of this. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Adjust traverses and survey networks by least squares, with residuals and error ellipses, and read raw data collector files. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Design detention ponds: stage–storage from the grading, outlet structures, and route the inflow hydrograph through the pond, beside the storm drainage network. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Total embodied carbon by material and element from BimCraft quantities or a TakeoffCraft estimate, with an open factor table the person can edit. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Lay out PV arrays on roofs and on the ground, shade them from the model and sun path, estimate yearly yield, size strings to the inverter, and draw the one-line in the Electrical add-on. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Load an IDS (Information Delivery Specification) file and check the open IFC model against it; each failed requirement shows in Problems and selects the element. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Put TakeoffCraft prices on the elements of the 4D schedule and show cost over time as a cash-flow curve. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

A calculation sheet beside the drawing or model: formulas with units, checked and converted as you type, values that can read from and drive parameters, saved in the file and printed with the set. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Open a marked-up PDF's markups over the DWG in CadCraft, accept or reject each one as a change, and get the revision clouds and a revision log. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Dimension a plan, a drawing view or a part with one command by rules the person picks: overall, grids, openings, holes, chains or baselines. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Step-by-step lessons inside each app that check what the person did, from first steps to a finished drawing or model, with badges for finished courses. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md. Widened 2026-10-27 (second list): a mentor mode that gives hints, not answers, and tracks skills.

Fair a hull on NURBS surfaces and calculate hydrostatics (displacement, centres, stability curves). Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Design open pits (benches, ramps) on CivilCraft terrain and view block models with grades. No requester yet. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Towers and antennas with coverage sketches and fiber routes, on the power-lines route engine. No requester yet. Owner's review list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md.

Stress, deflection and heat flow colour the part while you edit it, and frames while you drag a beam: a coarse result at once, refined when you stop. No Run button; it can be paused. Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

Cost (TakeoffCraft prices), embodied carbon, weight and schedule time shown in the status bar and updated with every edit, with the change since the last save. Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

One command searches for the worst load case and combination, the weakest member or connection, and the escape route that fails the regulation pack, then shows the failure on the model. Solver and rule based; an assistant can drive it. Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

Pick Earth, Moon, Mars, orbit, deep water or arctic (or type values): gravity, outside pressure and temperature, and every solver runs again with them. Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

Make hundreds of variants from parameters, configurations or a script, run them on this computer (overnight if needed), see them on a cost / weight / carbon chart with the best trade-offs marked, and make the chosen one the design. Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

Each element can carry its reasons: the requirement, the load, the calc sheet, the rule and the decision note. Click a beam and see why it is that size; assistants read the same record. Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

Move a grid line and the dimensions, tags and callouts attached to it move with it on every sheet of the set. (BimCraft already does this: its sheets are views of the model.) Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

Beyond the 0.7 trace: straighten a phone photo of a sketch or whiteboard, scale it from one known length, and put the traced lines on layers by line weight. Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

Put a photo of a part beside a known length on a sketch plane, trace its outline into a sketch, and extrude it — a start for remaking a broken part. Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

Compare a point cloud with the model: colours by deviation, elements built or missing, percent complete, and which elements are behind the 4D schedule. Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

The things an experienced engineer catches: no room to fit or turn a bolt, weld access, edge distances, water paths at details. Rules in Problems, building on DetailCraft's design checks. Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

Collect the regulation report, the comments a reviewer is likely to make (from failed and borderline rules), the sheets and the forms into one permit package. Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

Play an earthquake record, a wind storm or a rising flood on the actual model and watch it respond, from the structural and flood solvers. Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

The rendered walkthrough video with spoken narration and subtitles in the client's language, from the computer's own text-to-speech. Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

Read price, stock and lead-time files or feeds from suppliers the person connects, and prefer sections that are in stock this month. Owner's second list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Second list.

Ghost geometry ahead of the cursor, like code completion: finish the stair, repeat the stud pattern, close the wall. Tab accepts, Esc dismisses. From the drawing's own patterns, on this computer. Great Eight headliner. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Sketch with a pen and, as the pen lifts, the stroke becomes a line, arc, circle, rectangle or polyline that snaps to what is there, with its size shown to type over. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Drop views on a sheet and the app picks scales that fit, aligns them, adds titles and keynotes; everything stays editable. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Paste a room program (spreadsheet) and get massing options that fit the site, zoning and regulation pack, built on the 0.7 massing tools, then developed in BimCraft. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Mark elements existing, to demolish or new; plans, schedules and quantities for each phase come from the one model. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Fill every room with furniture from the library by room type and a chosen style, for renderings; removable in one step. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Tools an assistant can use to set the scene: time of day, weather, season, trees, people on the plaza — "dusk, light rain, autumn trees" changes the render, with the engine chosen in 0.8. Great Eight headliner. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Photograph a brick wall or a wood floor and get a tiling material (colour, bump, roughness) ready for the material library. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Overlay two sets and get a plain list of every change by sheet, which an assistant can turn into a narrated summary. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Record a voice note on site or a decision in a review and pin it at that spot on the sheet. Turning speech into text waits on EG.53. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Count every door, fixture and device type in a legend across the whole PDF set in one run, each count linked back to its sheet — beyond auto-count's one symbol at a time. Great Eight headliner. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

What things really cost on past jobs (by date and place) goes into the price library next to book prices. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Drop a storm on the graded surface and watch water flow, pond and overtop (2D overland flow). Great Eight headliner. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Adjust pad and profile elevations within limits until cut and fill balance, with the truckloads saved shown. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Find the lowest-cost alignment for a road, pipe or power line across the terrain within the person's limits (grades, curves, areas to avoid). Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

From the erection phases: crane picks (weight, radius, the crane's chart) and sequence, played as an animation the crew can open on a phone. Great Eight headliner. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Place connections on every joint of the model by your rules in one run, and check each one. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Colours where bars are too close for concrete to flow, against the clear-spacing rule and the aggregate size. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Tools an assistant can use to pick a generator, size it from the loads and material ("bracket holding 20 pounds at 6 inches, aluminium, machinable") and stress-check it, so the part comes back checked. Great Eight headliner. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Estimated cost and time to machine, print or cut the part from its toolpaths and material, updated as it changes; outside shop quotes later. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

Each app offers prompts and instructions through MCP (and as files for platforms that take skills or custom instructions), so any assistant knows the tools and our rules from the first message: dimension a plan, check a model, total a takeoff, run a design study. Owner 2026-10-27 ("make it easy to connect to from their AI platforms"). Plan docs/0.8-PART5.md § Connect your AI. Widened 2026-10-27 (Connect your AI list): skill packs per app and per discipline (structural, MEP, civil, aerospace), and a gallery of tested prompt starters in each app ("audit this sheet set", "count every fixture").

A box in each app to ask or instruct in plain words — "show me every 2-hour wall", "12 by 16 room, 3-foot door centred on the south wall" — sent to the AI the person connected, which answers with the app's own tools: it selects, highlights in 3D or draws, each change one undo step. Owner's third list 2026-10-27 (Great Eight headliners; duplicates removed). Plan docs/0.8-PART5.md § Third list.

The same tools described as OpenAPI, generated from the MCP definitions, for platforms that use plain function calling or custom actions. Owner's Connect your AI list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Connect your AI.

A third permission between Read and Edit: the assistant proposes, and its edits arrive as a reviewable change set (shown on the drawing, like a pull request) that the person accepts or rejects in whole or in part. Permissions per app and per project. Owner's Connect your AI list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Connect your AI.

A readable record in Studio of what each assistant read, ran and changed, by session and file, exportable for firms that need an audit trail; each change links to its undo step and file history. Owner's Connect your AI list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Connect your AI.

A firm loads its layers, text styles, details and rules once; every assistant gets them with the tools and its work is checked against them (the drawing check and Problems). Owner's Connect your AI list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Connect your AI.

Every tool returns a clear error with what to try, and a preview (picture or numbers) of what it did or would do, so an assistant can check itself instead of guessing. Owner's Connect your AI list 2026-10-27 (duplicates removed). Plan docs/0.8-PART5.md § Connect your AI.

Components (D-CH2), ideal gas, Peng–Robinson and SRK with kij, NRTL/UNIQUAC/Wilson activity models, Henry's law, PT/PH/PS flash (vapour–liquid, liquid–liquid), bubble/dew points, enthalpy/entropy reference states; CoolProp wasm for pure fluids; Node tests against published textbook examples Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

Streams, mixer, splitter, heater/cooler, pump, compressor/expander, valve, flash drum, component splitter, heat exchanger (two-stream), recycle and tear streams (Wegstein/Broyden), design specs, mass and energy balance reports; a PFD drawn from the flowsheet Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

Process ids across `pid` (CadCraft), `plant` (BimCraft), flowsheet and line list; stream tables and tags on the P&ID; a pipe size change in 3D reruns hydraulics and updates the P&ID; Problems when they disagree Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

Holdups, levels, pressures and temperatures over time (stiff ODE/DAE solver in a worker), PID controllers and valves from the P&ID's loops, startup/shutdown/upset scripts, tuning aid, trends Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

Recipes as steps, equipment occupancy and a Gantt schedule (reuse SU.931's view), Monod fermentation kinetics, batch mass balances Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

Network flow on process piping (extend the LC.16/EG.1 solver: liquids and gases, fittings K/Crane-style 2K/3K, control valves Cv), pump curves and NPSH, compressor head, surge and water hammer (method of characteristics) Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

Stirred tanks and pipes on PartCraft's LBM flow (mixing time, residence-time distribution), plus our own finite-volume solver in `lib/cfd` (incompressible RANS k-ε on unstructured meshes, species transport) in place of OpenFOAM; VTK/CGNS out; checked against published benchmark cases Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH. 2026-10-28: owner's GPL rule — our own Apache-2.0 engine, nothing GPL in any form.

Nodes drawn on the P&ID (CadCraft) and marked in MarkupCraft, guidewords × parameters, causes/consequences/safeguards/actions worksheet saved with the drawing, action tracking, report PDF/XLSX Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

Scenarios from HAZOP rows, initiating-event frequencies, independent protection layers, target SIL, SIF verification (PFDavg for 1oo1/1oo2/2oo3 with proof tests) per IEC 61511 arithmetic Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

Combustion and vent emissions from the flowsheet, factors cited (EG.14's source decision), totals in running totals (EG.30) Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

Stream data from the flowsheet, problem table, composite and grand composite curves, ΔTmin trade-off, a heat-exchanger network grid with targets Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

Equipment cost correlations from published textbooks with an index the owner supplies, installation factors, utilities and operating cost; into TakeoffCraft's price library and 5D (EG.17) Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

RDKit MinimalLib (BSD, wasm) for structures (draw, SMILES/MOL in and out), properties and group-contribution estimates (Joback) that feed CH.1 components Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

`lib/molecular` — force fields from published parameters (Lennard-Jones, bonded terms, Ewald/PME electrostatics), velocity-Verlet with thermostats/barostats in workers, properties (density, diffusion, RDF) back into CH.1 components; XYZ/PDB in and out; in place of LAMMPS/GROMACS. Quantum chemistry stays out of 0.8 (no open-licence foundation we may use; a later own engine) Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH. 2026-10-28: owner's GPL rule — our own Apache-2.0 engine, nothing GPL in any form.

Instrument index, tag list, I/O list and loop diagrams generated from the P&ID (`pid` add-on), CSV/XLSX and drawn loop sheets Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

(connected AI, rule 35): tools to the AC.15 contract that build a flowsheet, P&ID and 3D layout from a description ("methanol from syngas, 500 t/d"), all linked (CH.4), in suggest mode (AC.12); eval tasks Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

The connected AI walks each P&ID node with guidewords and drafts deviations, causes, consequences and safeguards into the CH.14 worksheet as suggestions the team accepts or rejects; activity log (AC.13) Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

Flowsheet variables as a `lib/study` design study (EG.33) over compute nodes (CU.7), objectives energy, cost, emissions; Pareto front; the AI can start one through tools Owner put it on 0.8 on 2026-10-28. Plan docs/0.8-PART3.md § Track CH.

A data-only add-on kind `field` (cadcraft-field-pack v1): a manifest that lists, per host, the pieces a field needs — symbols, families, standard parts, templates, standards packs (REG.1 format), calc sheets (EG.18), Problems rules, lessons (EG.23), a skill pack (AC.5), a layout (WS.17), generators (CE), a sample file — and installs them in one step in every app and SuperCad Studio; a Fields page in the add-on directory with honest coverage cards; a build tool that assembles a pack from its sources; tests. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for architecture: arch symbols and door/window/stair families, sheet sets, room and door schedules, code-check packs, design lessons. Builds on BimCraft families + BIM-FAM-MORE, REG.1 packs, sheets, EG.56/EG.58/EG.59. Coverage today: ✅. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for structural engineering: member and connection libraries, load-combination templates, calc sheets (beam, column, footing), design-check Problems. Builds on lib/frame, concrete + seismic (SU.1056), plates, EG.5/EG.6/EG.43. Coverage today: ✅. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for civil and site engineering: plan/profile sheet sets, pipe and structure libraries, earthwork calc sheets, drainage checks. Builds on CivilCraft corridors, grading, pipes, SU.911/914, EG.69–71. Coverage today: ✅. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for mechanical (hvac) engineering: duct/fitting/equipment families, load and duct-sizing calc sheets, HVAC schedules, ventilation checks. Builds on hvac add-ons, EG.1, EG.13, LC.20, MEP-REL. Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for electrical (building) engineering: panel schedules, one-line symbols, voltage-drop and load calc sheets, outlet/lighting code checks. Builds on electrical add-on, EG.2, EG.4, SU.766, REG.1 tier 3 electrical. Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for plumbing and fire protection: fixture families, DFU/WSFU calc sheets, riser diagrams, sprinkler hazard checks. Builds on piping add-on, sprinkler add-on (EG.3), mep/fixtures.js. Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for construction engineering and management: schedule and cost templates, site logistics symbols, RFI/submittal logs, constructability checks. Builds on 4D (SU.931), 5D (EG.17), bidding (LC.13), EG.43, EG.39. Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for geotechnical engineering: boring log templates, soil libraries, bearing/settlement/slope calc sheets. Builds on EG.9 (built), EG.5. Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for transportation and traffic engineering: road and striping libraries, sign library, sight-distance and capacity calc sheets. Builds on corridors, EG.10, CV.1. Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for surveying and geomatics: survey symbol/point-code libraries, traverse and adjustment templates, plat sheets. Builds on EG.11, LC.3 scans, point clouds (Track PF), map layers. Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for landscape architecture: plant palettes, hardscape families, planting schedules, irrigation calc sheets. Builds on Track LD (plants, grading, irrigation aid). Coverage today: ✅. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for building envelope and façade engineering: curtain-wall and panel families, U-value and condensation (Glaser) calc sheets, wind-pressure-on-panel checks, bracket generator. Builds on lib/env (wind), BimCraft walls, PartCraft brackets. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for acoustical engineering: absorption/STC/IIC assembly library, reverberation and sound-isolation calc sheets, room targets. Builds on EG.49 room acoustics (partial). Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for lighting design: luminaire library from IES/LDT files, illuminance calc sheets, lighting-power checks, render presets. Builds on EG.4 (IES/LDT), SU.766 plots, renderer. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for interior design and millwork: furniture/finish families, finish schedules, millwork details, cut lists to CNC. Builds on cabinet add-on (SU.1035), EG.60 furnish, families. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for facilities and maintenance engineering: asset tag templates, COBie-style handover export, maintenance schedules, space data sheets. Builds on LC.12 twin, EG.45 life-cycle, SU.915 tags. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for water resources and hydrology: watershed templates, rational/SCS runoff calc sheets, culvert and channel checks. Builds on SU.957 rivers, EG.69 rain, LC.16 networks. Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for wastewater and water treatment: unit-process families, ASM1-based sizing calc sheets, plant layout templates. Builds on CH.20. Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for environmental engineering (air, soil remediation, permitting): contaminant-plume and remediation templates, permit checklists, screening calc sheets. Builds on CH.19 dispersion, EG.9 borings. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for coastal and ocean engineering: linear-wave and run-up calc sheets, breakwater armour (Hudson) checks, shoreline templates. Builds on EG.46 climate scenarios, terrain. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for agricultural and irrigation engineering: field drainage and pivot layouts, crop water (FAO-56) calc sheets, irrigation libraries. Builds on Track LD irrigation aid. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for mechanical design (parts and assemblies): fastener/bearing/standard-part libraries, drawing templates, shaft/bolt/spring calc sheets. Builds on PartCraft, standard parts, FEA, stack-ups (LC.18). Coverage today: ✅. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for manufacturing and production engineering (cam, sheet metal): post-processor and tool libraries, sheet-metal gauge tables, cycle-time calc sheets. Builds on CAM (LC.15), nesting (LC.17), sheet metal. Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for industrial engineering (factory layout, workflow, ergonomics): machine and conveyor families, line-balancing and takt calc sheets, NIOSH lifting and reach checks. Builds on SU.858 material handling, lib/study. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for tooling, mold and die design: mold-base and die-set libraries, draft/undercut checks, strip-layout templates, conformal-cooling generator. Builds on SU.934 shrink, CE generators (cooling channels), draft analysis. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for packaging engineering: carton dieline library, box-compression (McKee) calc sheets, pallet patterns. Builds on CadCraft 2D, nesting. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for additive manufacturing engineering: printer/material profiles, orientation and support checks, lattice generators. Builds on LC.21 print prep, CE lattices, SU.929 split. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for quality and metrology (inspection, cmm, gd&t): GD&T symbol set, inspection-plan templates, QIF in/out, scan-vs-CAD deviation reports. Builds on LC.18 stack-ups, LC.3 scan compare. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for chemical and process engineering: stream/unit libraries, flowsheet templates, data-sheet templates. Builds on Track CH (lib/process). Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for piping and plant design: pipe specs and fittings, isometric templates, line-list and stress-check templates. Builds on pid + plant add-ons (LC.5), CH.10–CH.12. Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for pharmaceutical and bioprocess engineering: GMP equipment families, batch-record templates, bioreactor sizing calc sheets. Builds on CH.6 batch, cleanroom (FL lab-cleanroom). Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for food and beverage process engineering: hygienic piping and equipment families, pasteurisation (F0/PU) and CIP calc sheets. Builds on Track CH. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for petroleum and refining engineering: crude-assay templates, refinery unit libraries, blending calc sheets. Builds on Track CH (pseudo-components). Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for process safety engineering: HAZOP/LOPA templates, guideword sets, consequence and area-classification templates. Builds on CH.14–CH.18, CH.30. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for power systems and utility engineering: substation and pole libraries, sag/tension and fault calc sheets, one-line templates. Builds on Track PL (power lines), electrical add-on. Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for renewable energy (solar, wind, storage): wind-turbine families + wake (Jensen) layout, storage sizing calc sheets, yield reports. Builds on EG.15 solar PV. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for nuclear engineering: plant layout and shielding (point-kernel) calc sheets only; export notice (O-FL2). Builds on lib/frame, PartCraft thermal. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for oil and gas (upstream, pipelines): pipeline wall-thickness (B31.4/B31.8 by clause) and hydraulics calc sheets, wellpad and pipeline libraries. Builds on corridors, CH.10 hydraulics. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for hydrogen and emerging fuels: storage and electrolyser families, separation-distance and venting calc sheets. Builds on Track CH, CH.17 area classification. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for energy and building performance modeling: climate and assembly libraries, energy-code templates, daylight and load reports. Builds on EG.13 EnergyPlus, LC.20 daylight, energy rules (REG.1). Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for electrical controls and automation (schematics, plc panels): schematic symbol set we draw ourselves, PLC I/O and terminal templates, panel layouts, wire/terminal reports, IEC 61131-3 ladder sheets. Builds on harness + cabinet wiring (SU.892), CH.28. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for electronics and pcb design: enclosure-from-board workflow, footprint outlines, schematic symbols; board layout itself waits on EG.25. Builds on SU.897 KiCad spike, EG.25 (owner direction). Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for semiconductor and chip design: GDSII viewing and layer maps, die and package outlines; export notice (O-FL2). Builds on SU.752 GDSII spike. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for rf, antenna and microwave engineering: link-budget and antenna-pattern calc sheets, a wire-antenna solver from NEC-2's published method (public domain). Builds on EG.28 telecom. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for telecommunications and fiber networks: fiber route and splice templates, tower and cabinet libraries, loss budgets. Builds on EG.28 (partial). Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for instrumentation and control engineering: instrument index, loop-diagram and hook-up templates, ISA-style tag rules. Builds on pid add-on, CH.28 loop diagrams. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for aerospace (aircraft): airfoil (published NACA) and wing-geometry generators, weight and balance calc sheets; export notice (O-FL2). Builds on PartCraft, CFD (LBM), lib/frame. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for astronautics and space systems: orbit and delta-v calc sheets, structure and thermal templates; export notice (O-FL2). Builds on lib/env orbit, thermal. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for automotive and ev engineering: suspension-kinematics calc sheets, harness and chassis templates. Builds on harness (SU.892), battery (FL battery). Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for rail engineering: track and turnout libraries, cant and alignment calc sheets. Builds on CV.1 railroads (partial). Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for naval architecture and marine engineering: hull templates, stability calc sheets, marine equipment libraries. Builds on EG.26 hull fairing + hydrostatics. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for robotics and mechatronics: kinematics (DH) calc sheets, URDF export, actuator libraries. Builds on assemblies, animation (Track AN). Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for autonomous systems and drones: frame generators, motor/prop sizing calc sheets, flight-plan templates. Builds on PartCraft, drone survey (SU.935). Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for optical and photonics engineering: paraxial lens and Seidel calc sheets, sequential ray-trace view, optical mounts library. Builds on path tracer (RN), PartCraft. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for materials science and engineering: cited materials database, Ashby-style selection charts, test-data templates. Builds on CH.24 cheminformatics, material library. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for battery and electrochemical engineering: cell/module/pack generators, pack thermal templates, single-particle-model calc sheets. Builds on PartCraft thermal. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for quantum engineering: chip-layout and cryostat-mechanics templates only (honest: a thin pack). Builds on GDSII (SU.752), magnetostatics (SG.7+). Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for data center and mission-critical facilities: rack and power-chain families, PUE and redundancy calc sheets, airflow studies. Builds on HVAC, electrical, CFD (LBM). Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for fusion and plasma engineering: magnet and vessel templates only (honest: a thin pack); export notice (O-FL2). Builds on magnetostatics (SG.7+), vacuum vessel FEA. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for biomedical and medical device engineering: design-history and traceability templates, biocompatible materials list, device drawing templates. Builds on FL systems-engineering traceability. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for clinical and hospital engineering: room data sheets, medical-gas families and checks, equipment planning lists. Builds on HVAC, plumbing, FL lab-cleanroom. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for biomechanical engineering (implants, prosthetics): implant/prosthetic templates from scans, lattice generators, load-case templates. Builds on mesh tools, CE lattices, FEA. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for laboratory and cleanroom design: ISO 14644 class and air-change calc sheets, pressure cascades, lab furniture families. Builds on HVAC. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for mining engineering: pit and haul-road templates, block-model templates, blast and fleet calc sheets. Builds on EG.27 (partial). Coverage today: 🟡. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for geological and petroleum reservoir engineering: geologic model templates, volumetrics calc sheets. Builds on EG.9 borings, EG.27 block models. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for tunnel and underground engineering: segment-ring and support templates, convergence-confinement calc sheets. Builds on corridors, lib/frame. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for dam and hydropower engineering: gravity-dam stability and spillway calc sheets, turbine selection charts. Builds on SU.957 rivers, spillways. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for fire and life safety engineering: egress and fire-rating templates, smoke-zone calc sheets, life-safety plans. Builds on EG.48 evacuation, REG.1 egress, sprinkler (EG.3). Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for security and blast-resistant design: stand-off and blast-load calc sheets from US-government public methods, protective layout templates. Builds on lib/frame, EG.47 hazards. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for systems engineering (requirements, traceability): requirements linked to model elements, ReqIF in/out, verification matrix. Builds on SU.915 tags, Problems. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for reliability and safety engineering: FMEA, fault-tree and reliability-block templates, Weibull calc sheets. Builds on CH.15 SIL, Problems. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for forensic engineering (failure investigation): evidence and timeline templates, scan-based reconstruction workflow. Builds on scans (LC.3), animation, FEA. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for entertainment engineering (stages, rides, rigging): truss and rigging libraries, rigging-load calc sheets, stage plans. Builds on SU.766 lighting plots, lib/frame trusses. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

One install that sets up every app (and SuperCad Studio) for exhibit and event design: booth and seating libraries, capacity calc sheets, event plan templates. Builds on EG.48 crowds, render. Coverage today: ⬜. The pack's card says plainly what it does and what it does not do yet. Plan docs/0.8-PART6.md (Track FL).

Clause-traced calculation reports (inputs, equations, results, revision block, engineer-of-record signature line) shared by every engine Plan docs/0.8-PART3-INDUSTRY.md § 6 (closes the industry bar in § 2).

10k-line P&ID, 500-unit flowsheet, 5k-node stress model, 50 pipes, one at a time (surge), field kernel at 0.1 mm — on workstation11a; Rust→WASM only where measured Plan docs/0.8-PART3-INDUSTRY.md § 6 (closes the industry bar in § 2).

Symbols with pins, nets, wire and terminal numbering, cross-references, terminal and cable plans, BOM, rule checks; one engine under P&IDs, control schematics, harnesses, one-lines, fire alarm, telecom. One engine (rule 39) used by field packs FL.5, 29–30, 41, 42, 45, 46, 49, 58, 68. Built our own, Apache-2.0 (rule 43). Plan docs/0.8-PART6-INDUSTRY.md § 1.

One solver family: pipes, ducts, gas, district heating, water; plus electrical load flow (Newton–Raphson), short circuit, voltage drop, protection coordination curves. One engine (rule 39) used by field packs FL.4–6, 17, 18, 30, 35, 36, 38, 39, 45, 58, 61. Built our own, Apache-2.0 (rule 43). Plan docs/0.8-PART6-INDUSTRY.md § 1.

Rigid-body chains, DH, inverse kinematics, contact-free multibody dynamics, joints and drives, URDF in/out. One engine (rule 39) used by field packs FL.24, 49, 52, 53, 73. Built our own, Apache-2.0 (rule 43). Plan docs/0.8-PART6-INDUSTRY.md § 1.

Queues, resources, conveyors, AGVs, shifts, people flow; one engine for factories, warehouses, hospitals, airports, construction logistics, evacuation. One engine (rule 39) used by field packs FL.7, 24, 61, 68, 74. Built our own, Apache-2.0 (rule 43). Plan docs/0.8-PART6-INDUSTRY.md § 1.

A constraint solver for closed kinematic loops, as an extension of lib/motion (XE.4). Size it first; it starts after XE.4 is mounted in a host (rule 41).

CPM with resources, 4D/5D, shutdowns and turnarounds, maintenance plans. One engine (rule 39) used by field packs FL.7, 16, 31, 61. Built our own, Apache-2.0 (rule 43). Plan docs/0.8-PART6-INDUSTRY.md § 1.

Requirements linked to model elements, tests and documents; ReqIF in/out; verification matrices; design history files. One engine (rule 39) used by field packs FL.47, 48, 60, 70, 71, and every regulated field. Built our own, Apache-2.0 (rule 43). Plan docs/0.8-PART6-INDUSTRY.md § 1.

FMEA/FMECA, fault trees, reliability block diagrams, Weibull, Markov, medical risk files. One engine (rule 39) used by field packs FL.34, 37, 47, 48, 60, 71, 72. Built our own, Apache-2.0 (rule 43). Plan docs/0.8-PART6-INDUSTRY.md § 1.

Circuit simulation (our own SPICE-class solver), magnetostatics, wire-antenna method of moments (NEC-2's published method), simple field solvers. One engine (rule 39) used by field packs FL.35, 42–44, 49, 56, 57, 59. Built our own, Apache-2.0 (rule 43). Plan docs/0.8-PART6-INDUSTRY.md § 1.

Schematic-to-board, placement, routing, DRC, Gerber X2 / IPC-2581 out, GDSII view with layer maps and basic DRC. One engine (rule 39) used by field packs FL.42, 43, 57. Built our own, Apache-2.0 (rule 43). Plan docs/0.8-PART6-INDUSTRY.md § 1.

Acausal component models (hydraulic, thermal, electrical, mechanical) for vehicles, HVAC plants, batteries, power plants; Modelica-subset reader (the language spec is open). One engine (rule 39) used by field packs FL.4, 35, 36, 39, 49, 52, 56. Built our own, Apache-2.0 (rule 43). Plan docs/0.8-PART6-INDUSTRY.md § 1.