Fixtures: Wall and ceiling fittings
Generic crown moulding length, 7 in crown with dentils, 8 ft
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Fixtures: Wall and ceiling fittings
- Kind
- Fixture
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Crown moulding 96 in long, 7 in high, shown on end: a sprung profile from wall to ceiling with a row of dentil blocks under it and a bead along the lower edge.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 114.3 mm (4.5 in) |
| Depth | 2,438.4 mm (96 in) |
| Height | 177.8 mm (7 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the sprung crown profile from wall to ceiling, a row of dentil blocks under it and a bead along the lower edge, standing on end so the profile shows (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.