Automotive: Workshop and garage
Generic four-post vehicle lift, 14,000 lb, alignment, 240 in runways
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Automotive: Workshop and garage
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Four-post drive-on vehicle lift, 14,000 lb class, shown raised: four columns with top cross beams and side rails, two long runways with rear ramps and front wheel stops, lifting cables and a power unit, plus front turn plates and rear slip plates for wheel alignment.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 3,200.4 mm (126 in) |
| Depth | 7,112 mm (280 in) |
| Height | 2,286 mm (90 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the four columns with top beams and rails, two runways with ramps and wheel stops, cables and power unit, front turn plates and rear slip plates (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.