Tools: Workshop machines
Generic hydraulic shop press, 50 ton H-frame, workshop
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Tools: Workshop machines
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
50 ton H-frame hydraulic shop press: two upright column pairs with a row of pin holes, a top crown carrying a hydraulic cylinder and ram with a press plate, an adjustable bed of two beams held on pins, a hand pump with a lever, a pressure gauge, return springs and a base with two feet.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 1,244.6 mm (49 in) |
| Depth | 565.2 mm (22.3 in) |
| Height | 1,981.2 mm (78 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the two upright column pairs with pin holes, top crown, cylinder with ram and press plate, pinned bed beams, return springs, gauge, hand pump with lever and the feet (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.