Aerospace: Airframe and structural parts
Generic lattice grid fin on an actuator post, 24 in fin
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Aerospace: Airframe and structural parts
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Grid fin, 24 in across, standing on a post: an outer frame with a lattice of crossing cell walls, a hinge shaft with bearing blocks, an actuator housing with a horn arm, a column and a footplate.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 1,219.2 mm (48 in) |
| Depth | 426.7 mm (16.8 in) |
| Height | 829.1 mm (32.6 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the outer frame with a six by six lattice of cell walls, the hinge shaft and bearing blocks, the actuator housing with horn arm, the column and the two footplates (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.