Aerospace: Launch vehicles and pads
Generic launch pad water deluge tower, 12 ft tank, 60 ft legs
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Aerospace: Launch vehicles and pads
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Elevated water tank for pad deluge, a 12 ft tank with dished ends on six braced legs 60 ft up: ring girder, two tiers of cross bracing, a caged ladder, a down pipe with an elbow and flanged discharge, and a valve enclosure at the foot.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 6,451.6 mm (254 in) |
| Depth | 6,451.6 mm (254 in) |
| Height | 24,079.2 mm (948 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded six footed legs with two tiers of cross bracing and a ring girder, the dished-end tank with weld band and roof vent, caged ladder, down pipe with flanged discharge and the valve enclosure (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.