Aerospace: Launch vehicles and pads
Generic launch vehicle on a tilting erector, 120 in vehicle, 100 ft
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Aerospace: Launch vehicles and pads
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Launch vehicle, 120 in across and 100 ft long, raised 60 degrees on a transporter-erector: twin-beam cradle with cross ties, tail hinge pedestals, a lift cylinder and a skid base. Plain tube with ogive nose, stage rings and a bell.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 6,858 mm (270 in) |
| Depth | 19,151.6 mm (754 in) |
| Height | 29,494.5 mm (1,161.2 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the vehicle tube with nose, stage rings and bell, the twin-beam cradle with cross ties and saddles, the hinge pedestals, lift cylinder with rod and the skid base (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.