Marine: Harbour and dock equipment
Generic lifeboat station, boathouse and slip
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Marine: Harbour and dock equipment
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Lifeboat station: a boat shed with a gabled roof, a wide front door with side doors and a loading dock, a launch slip with two rails and sleepers running into the water, a small control hut and a flagpole; a lifeboat hull is shown on its carriage inside the door opening.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 10,668 mm (420 in) |
| Depth | 24,384 mm (960 in) |
| Height | 7,620 mm (300 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the boat shed with gabled roof, wide door and side doors, the launch slip with two rails and sleepers, the lifeboat hull on its carriage, the control hut and the flagpole (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.