Tools: Workshop machines
Generic plasma cutter, inverter, 60 amp, on two-wheel cart with air filter
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Tools: Workshop machines
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Plasma cutter on a two-wheel cart: the power case on a tube cart with a rear handle, front panel with dial, gauge and sockets, an air filter and regulator bowl on a bracket, a torch lead with a handled torch, a ground clamp lead and a tool tray.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 508 mm (20 in) |
| Depth | 863.6 mm (34 in) |
| Height | 965.2 mm (38 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the cart with handle and wheels, the power case with front panel, dial, gauge and sockets, the air filter and regulator bowl, the torch lead and ground clamp lead and the tool tray (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.