3D printing: Printers and build plates
Generic printer trolley, three shelves with drawer, 30 in
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- 3D printing: Printers and build plates
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Trolley with four posts on casters, 3 lipped shelves, a drawer, a push handle loop and a small printer shape on the top shelf.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 762 mm (30 in) |
| Depth | 508 mm (20 in) |
| Height | 1,117.6 mm (44 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded four corner posts on casters, 3 lipped shelves, a drawer under the lower shelf, a push handle loop and a small printer shape (bed, two uprights, X beam and hot end) on the top shelf (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.