3D printing: Printers and build plates
Generic resin wash and cure station, workshop, 12 in vats
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- 3D printing: Printers and build plates
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Resin finishing station with a wash bin holding a stirrer base and a hanging basket, beside a cure box with a turntable, lamp strips, a front control and a hood opened on its hinge.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 965.2 mm (38 in) |
| Depth | 508 mm (20 in) |
| Height | 406.4 mm (16 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded a wash bin with a stirrer base, a hanging basket frame and handle, and a cure box with a turntable, two lamp strips, a front control and a hood opened on its rear hinge (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.