Aerospace: Launch vehicles and pads
Generic rocket motor segment on a transport cradle, 60 in motor, 20 ft
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Aerospace: Launch vehicles and pads
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Solid-propellant style motor segment, 60 in across and 20 ft long, lying in three saddles on a skid cradle: a cylindrical case with three joint rings, a forward dome with an igniter boss, an aft dome with a capped nozzle stub, two lifting lugs and tie-down straps over the saddles.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 6,858 mm (270 in) |
| Depth | 2,794 mm (110 in) |
| Height | 2,946.4 mm (116 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the segment case with joint rings, domed ends, igniter boss and capped nozzle stub, the lifting lugs, three saddles with straps and the skid rails (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.