Aerospace: Ground and test equipment
Generic satellite ground tracking antenna, 480 in dish
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Aerospace: Ground and test equipment
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Tracking antenna with a 480 in dish raised 55 degrees: a pad and pedestal with a turntable ring, a U yoke with elevation hubs, a dish with a rim hoop and a feed on three struts, a counterweight arm behind and an equipment room with a door beside the base.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 18,897.6 mm (744 in) |
| Depth | 11,826.2 mm (465.6 in) |
| Height | 13,929.4 mm (548.4 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the pad, pedestal and turntable ring, the U yoke with elevation hubs, the dish at 55 degrees with rim hoop and feed on struts, the counterweight arm and the equipment room (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.