Marine: Offshore and subsea
Generic subsea manifold, 6 slots
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Marine: Offshore and subsea
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Subsea production manifold with 6 well slots: a mud mat and welded frame, two parallel headers with isolation valves at each end, 6 branch pipes each with a valve block, actuator and connector hub on the front face, a pigging loop at the rear and ROV torque-tool buckets.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 7,518.4 mm (296 in) |
| Depth | 3,657.6 mm (144 in) |
| Height | 2,438.4 mm (96 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the mud mat and frame, two headers with end valves, 6 branch pipes with valve blocks, actuators and connector hubs, the pigging loop and the ROV buckets (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.