Aerospace: Airframe and structural parts
Generic turbofan engine nacelle on a stand, 90 in fan
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Aerospace: Airframe and structural parts
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Podded engine nacelle with a 90 in fan on a floor stand, nose to the front: an open inlet with lip ring and fan blades behind a spinner, a tapering outer cowl with a thrust-reverser band, a core nozzle with plug and a pylon stub on top.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 3,429 mm (135 in) |
| Depth | 6,172.2 mm (243 in) |
| Height | 4,902.2 mm (193 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the inlet with lip ring and fan blades behind a spinner, the tapering cowl with reverser band, the core nozzle and plug, the pylon stub and two stand saddles (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.