Resources Numerical accuracy

Equality comparisons

Where the code asks whether two decimal numbers are exactly equal. A floating-point result can differ from another in the last digit after a few transformations, so a mesh run through several of them can change the length of an edge, or miss a match. Compare with < or > where a range is meant, and with a documented epsilon where equality is.

316 comparisons to look at
149 files
175 likely to matter (against a decimal, or two computed values)
Scanned November 6, 2026

These are places worth checking, not confirmed bugs. The scan reads how the code is written, not what it is meant to do, so some entries are fine as they are: a test against exactly 0 is often a deliberate guard against dividing by zero. It skips text, counts and indexes, and any comparison it cannot be sure involves decimal numbers, so there are likely more in the code than are listed here.

Against 1 render/pt-ggx.js:55 in modulatedEta BimCraft, ModelCraft
```
if (weight === 1) return eta;
```
=== in weight === 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Reviewed: Path tracer kernels.
Against 1 site-context.js:59 in cleanContext BimCraft, ModelCraft, CivilCraft
```
if (!o || typeof o !== 'object' || o.format !== FORMAT || o.v !== 1) return null;
```
!== in o.v !== 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Reviewed: Site surroundings in local meters.
Against 1 xr/xr-core.js:179 in cleanPeer BimCraft, ModelCraft
```
if (!x || typeof x !== 'object' || x.v !== 1 || !isPose(x.h)) return null;
```
!== in x.v !== 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Reviewed: Headset review: measuring, section cuts and issue cameras, AR on site: lining the model up with the building.
Against 1 addons/cabinetcraft/lib/core.js:17 in lookupFrom CadCraft, BimCraft, ModelCraft, PartCraft
```
if (s && typeof s === 'object') s = (vars.n !== undefined && s['=' + vars.n]) || (Number(vars.n) === 1 && s.one) || s.other || key;
```
=== in Number(vars.n) === 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Not in the register.
Against 1 addons/trusscraft/lib/core.js:12 in lookupFrom CadCraft, BimCraft, ModelCraft, PartCraft
```
if (s && typeof s === 'object') s = (vars.n !== undefined && s['=' + vars.n]) || (Number(vars.n) === 1 && s.one) || s.other || key;
```
=== in Number(vars.n) === 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Not in the register.
Against 1 dwg/messages.js:188 in msg CadCraft, BimCraft, ModelCraft, TakeoffCraft, CivilCraft, DetailCraft, PartCraft
```
if (typeof s === 'object') s = s['=' + fills.n] ?? (Number(fills.n) === 1 ? s.one : s.other) ?? s.other;
```
=== in Number(fills.n) === 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Not in the register.
Against 1 dwg/objects-write.js:658 in insertScale CadCraft, BimCraft, ModelCraft, TakeoffCraft, CivilCraft
```
if (sx === 1 && sy === 1 && sz === 1) w.BB(3);
```
=== in sx === 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Reviewed: DWG object values written and read.
Against 1 dwg/objects-write.js:658 in insertScale CadCraft, BimCraft, ModelCraft, TakeoffCraft, CivilCraft
```
if (sx === 1 && sy === 1 && sz === 1) w.BB(3);
```
=== in sy === 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Reviewed: DWG object values written and read.
Against 1 dwg/objects-write.js:658 in insertScale CadCraft, BimCraft, ModelCraft, TakeoffCraft, CivilCraft
```
if (sx === 1 && sy === 1 && sz === 1) w.BB(3);
```
=== in sz === 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Reviewed: DWG object values written and read.
Against 1 dwg/objects-write.js:660 in insertScale CadCraft, BimCraft, ModelCraft, TakeoffCraft, CivilCraft
```
else if (sx === 1) { w.BB(1); w.DD(sy, 1); w.DD(sz, 1); }
```
=== in sx === 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Reviewed: DWG object values written and read.
Against 1 dwg/objects-write.js:774 CadCraft, BimCraft, ModelCraft, TakeoffCraft, CivilCraft
```
const weights = ctrl.some((p) => p.w !== undefined && p.w !== 1) || (r.weights || []).some((x) => x !== 1);
```
!== in p.w !== 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Reviewed: DWG object values written and read.
Against 1 dwg/objects-write.js:818 CadCraft, BimCraft, ModelCraft, TakeoffCraft, CivilCraft
```
const rational = ctl.some((p) => p.w !== undefined && p.w !== 1);
```
!== in p.w !== 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Reviewed: DWG object values written and read.
Against 1 dwg/table-write.js:70 in insertScale CadCraft, ModelCraft, CivilCraft, DetailCraft, PartCraft
```
if (sx === 1 && sy === 1 && sz === 1) w.BB(3);
```
=== in sx === 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Not in the register.
Against 1 dwg/table-write.js:70 in insertScale CadCraft, ModelCraft, CivilCraft, DetailCraft, PartCraft
```
if (sx === 1 && sy === 1 && sz === 1) w.BB(3);
```
=== in sy === 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Not in the register.
Against 1 dwg/table-write.js:70 in insertScale CadCraft, ModelCraft, CivilCraft, DetailCraft, PartCraft
```
if (sx === 1 && sy === 1 && sz === 1) w.BB(3);
```
=== in sz === 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Not in the register.
Against 1 dwg/table-write.js:72 in insertScale CadCraft, ModelCraft, CivilCraft, DetailCraft, PartCraft
```
else if (sx === 1) { w.BB(1); w.DD(sy, 1); w.DD(sz, 1); }
```
=== in sx === 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Not in the register.
Against 1 live-crypto.js:329 in verifyAssertion CadCraft, BimCraft, ModelCraft, MarkupCraft, TakeoffCraft, CivilCraft, DetailCraft, PartCraft
```
if (!sig || !claims || claims.v !== 1 || typeof claims.name !== 'string') return { ok: false, reason: 'format' };
```
!== in claims.v !== 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Not in the register.
Against 1 usd/usda-write.js:40 in subLayersText CadCraft, BimCraft, ModelCraft, TakeoffCraft, CivilCraft, DetailCraft, PartCraft
```
return asset(a) + (o && (o.offset !== 0 || o.scale !== 1) ? ' (' + layerOffsetText(o) + ')' : '');
```
!== in o.scale !== 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Reviewed: Number text in USD files.
Against 1 usd/usda-write.js:47 in layerOffsetText CadCraft, BimCraft, ModelCraft, TakeoffCraft, CivilCraft, DetailCraft, PartCraft
```
if (o.scale !== 1) parts.push('scale = ' + num(o.scale, 'f64'));
```
!== in o.scale !== 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Reviewed: Number text in USD files.
Against 1 usd/usda-write.js:172 in listItemText CadCraft, BimCraft, ModelCraft, TakeoffCraft, CivilCraft, DetailCraft, PartCraft
```
if (o && (o.offset !== 0 || o.scale !== 1)) parts.push(layerOffsetText(o));
```
!== in o.scale !== 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Reviewed: Number text in USD files.
Against 1 mesh/ops.js:773 in splitByPoints ModelCraft
```
if (inSplit.has(f) && on.length === 2 && Math.abs(on[0] - on[1]) !== 1 && Math.abs(on[0] - on[1]) !== vs.length - 1) {
```
!== in Math.abs(on[0] - on[1]) !== 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Reviewed: Proportional editing weights and edge creases, Inset, bevel and moves along normals, Subdivide, loop cut, bisect, knife and grid fill, Merge, spin, bridge, slide and smooth.
Against 1 model-info.js:58 in cleanTemplate ModelCraft
```
if (!v || typeof v !== 'object' || v.v !== 1) return null;
```
!== in v.v !== 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Not in the register.
Against 1 nurbs/step.js:302 in trimOf ModelCraft, PartCraft
```
let seg = c.deg === 1 ? c.cvs.slice() : Array.from({ length: 33 }, (_, i) => C.point(c, a + (z - a) * i / 32));
```
=== in c.deg === 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Reviewed: STEP files of NURBS curves and surfaces.
Against 1 skp/messages.js:160 in msg ModelCraft
```
if (typeof s === 'object') s = s['=' + fills.n] ?? (Number(fills.n) === 1 ? s.one : s.other) ?? s.other;
```
=== in Number(fills.n) === 1. Fine for a value that is set, not computed (a default scale). If it comes from a calculation, use an epsilon. Not in the register.