Plumbing: Plumbing equipment
Generic aircraft wash-water recycling skid, 2 filters, 2,000 gal
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Plumbing: Plumbing equipment
- Kind
- Fixture
- Library class
- Assets
- Level of development
- Not stated
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Skid with a settling tank, a filter vessel 2, a transfer pump, a clean-water holding tank, a pressure washer pump with a hose reel, interconnecting pipes with valves and a control cabinet.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 5,486.4 mm (216 in) |
| Depth | 1,676.4 mm (66 in) |
| Height | 2,438.4 mm (96 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Notes from practice
0 from real projectsNo one has written a note yet. If you used this on a project, tell the next person what you found.
Sign in to add a note.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the skid, the settling tank, the clean-water tank, the filter vessels, the pumps, the connecting pipes with valves, the hose reel and the control cabinet (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.