Plumbing: Plumbing equipment
Generic hangar oil-water separator, 500 gpm
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Plumbing: Plumbing equipment
- Kind
- Fixture
- Library class
- Assets
- Level of development
- Not stated
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Horizontal steel separator rated 500 gpm lying on saddles with a hatch and riser for the inlet chamber, a hatch on the oil chamber, an outlet chamber with a sample port, two ladder rungs at each riser and an oil outlet pipe.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 6,705.6 mm (264 in) |
| Depth | 2,133.6 mm (84 in) |
| Height | 2,438.4 mm (96 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Notes from practice
0 from real projectsNo one has written a note yet. If you used this on a project, tell the next person what you found.
Sign in to add a note.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the cylindrical shell on saddles, three risers with covers and ladder rungs, the inlet and outlet connections, the chamber baffles (dashed) and the sample port (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.