Mechanical: Mechanical equipment
Generic hospital campus air-cooled chiller, 10 fan
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Mechanical: Mechanical equipment
- Kind
- Equipment
- Library class
- Assets
- Level of development
- Not stated
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Outdoor air-cooled chiller with 10 condenser fans with guards, coil banks with louvers on both long sides, a compressor and control section with a hinged door, a base frame and four lifting lugs.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 8,839.2 mm (348 in) |
| Depth | 2,336.8 mm (92 in) |
| Height | 2,641.6 mm (104 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Notes from practice
0 from real projectsNo one has written a note yet. If you used this on a project, tell the next person what you found.
Sign in to add a note.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the base frame, the louvered coil banks, the condenser fans with guards, the compressor and control section with its door and the lifting lugs (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.