Automotive: Workshop and garage
Generic hydraulic shop press, 50 ton
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Automotive: Workshop and garage
- Kind
- Equipment
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
50 ton floor-standing H-frame shop press: two footed uprights with pin holes, a head beam, two pin-set bed bars with a stepped table, a hydraulic cylinder with ram and press plate, a pressure gauge, and a pump unit with handle and hoses.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 1,219.2 mm (48 in) |
| Depth | 762 mm (30 in) |
| Height | 1,981.2 mm (78 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the two footed uprights with pin holes, the head beam, two pin-set bed bars with a stepped table, the hydraulic cylinder with ram and press plate, a pressure gauge, and the pump unit with handle and hoses (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.