Plumbing: Plumbing equipment
Generic mine portal dust-suppression spray arch, 10 ft opening
Drawn to fit this frame, not to a scale. Front faces down the page. Dashed lines are hidden or above; dotted lines are door swings and clearances.
- Category
- Plumbing: Plumbing equipment
- Kind
- Fixture
- Library class
- Assets
- Level of development
- Not stated
- Languages
- None provided. The words are as the provider wrote them.
- Author
- CadCraft
- Version
- 2, published Nov 3, 2026 Published
Steel arch 10 ft wide over a haul road with a spray pipe over its top and down both legs carrying 8 nozzles, a supply riser with a valve and gauge, two concrete foot blocks and a small control box.
License
CC0CC0 1.0 (public domain dedication). Anyone may use, change and share it for any purpose, with no conditions. Credit is welcome but not required.
The credit line for this version. Select it and copy it into your drawing or sheet notes.
Data
| Width | 3,657.6 mm (144 in) |
| Depth | 914.4 mm (36 in) |
| Height | 3,962.4 mm (156 in) |
| Scalable: width (X) | No |
| Scalable: depth (Y) | No |
| Scalable: height (Z) | No |
| Remarks | Generic size; check the chosen unit's spec sheet. |
IFC class: IfcFurnishingElement. Body: a mesh.
Notes from practice
0 from real projectsNo one has written a note yet. If you used this on a project, tell the next person what you found.
Sign in to add a note.
Versions
All versions| Drawing | Version | Change | License | Status | Published |
|---|---|---|---|---|---|
| Version 2 | GeometryAdded the foot blocks, the steel legs and top beam, the spray pipe with its nozzles, the supply riser with valve and gauge and the control box (plan and 3D). | CC0 | Published | Nov 3, 2026 | |
| Version 1 | GeometryFirst version. | CC0 | Published | Nov 3, 2026 |
Make a copy and change it
Sign in to copy this item into your own library. The copy keeps a "Based on" link and credit to this one.
Report a problem
Wrong sizes, copied work, something that isn't a library item: tell us. Copyright holders can also write through the support form. How we handle it is on the rules page.