Roadmap 0.11, Suggestions and email, 2026-11-10 to 11-13
MEP.4 BimCraft: split, multi-split and VRF systems: refrigerant pipe pairs and condensate drains routed from outdoor to indoor units, with branch kits
Built in the lab (BimCraft a Discord member), partly. Split, multi-split and VRF: the liquid and gas lines are routed as ONE path and drawn as a parallel pair (never crossing, round every corner), branch kits marked where a branch leaves the trunk, pairs sized from the line-set table (hvac.js, the person's), total length, longest run and height differences checked against limits the person types (a limit left empty is not checked; no product data, no brand), condensate drained by MEP.2's gravity rule. Tested: an outdoor unit and three indoor units, IFC4 read back.
Not done: the pair starts and ends between the two ports of a unit, so the lines are not fixed to the ports (open ends in the Connections check); the branch kit is a marker, not the refnet joint equipment; equivalent lengths are not worked out; not tested in the browser page; no help topic.
Shared engine lib/mep-route (route.js, network.js, plus gravity.js, water.js, refrigerant.js), copied to bimcraft a Discord member/mep-route by tools/mep-route/sync.mjs; adapter a Discord member/mep/route-systems.js; panel Clash check > Route other systems automatically (mep/route-systems-ui.js). Tests: node lib/mep-route/test/{test,gravity,water,refrigerant}.mjs; node tools/mep-route/systems-test.mjs (a small house routed, IFC4 saved and read back, ports connected); tools/mep-route/browser-systems.mjs (drainage in /lab). Log docs/0.10-sessions/mep-10.md. No code compliance is claimed; a qualified person checks the design.
0.11 (mep-plant-11), in /lab: lengths checked on equivalent lengths (the maker's bend and kit values, typed), each line carried on to its own unit port where the run model has room (note port-offset where it does not: the outdoor unit's ports stand 80 mm one above the other), tested in the real page (browser-systems2.mjs).
Community comments
No comments yet
Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.
Sign in or create a free account to add a comment.