Roadmap 0.11, Suggestions and email, 2026-11-10 to 11-13
SU.1814c Steel stair generator: stringers, treads, landings and handrails from a rise and run, with shop drawings and a cut list (DetailCraft)
Asked on /suggest (#1814, 2026-11-13, part 3 of three asks): a steel stair generator in BIM and CAD with detailed drawings for the workshop.
What exists: BimCraft stairs (concrete/timber, SU.1055), DetailCraft steel sections and connections, PartCraft weldments. This row: DetailCraft generator from floor-to-floor height, run, width and tread type (chequer plate, grating, folded plate): stringer section, number of risers with the rise/going rule the person chooses (cited, region as a setting), landings, handrails and balusters; shop drawings per assembly (stringer with hole positions, tread detail), a cut list and weights; placed into BimCraft as one stair element.
PARTLY BUILT 2026-11-15 (detail-10). Built in DetailCraft (Place > Stair, tick the steel stair generator): floor-to-floor height, run, width and tread type (chequer, grating, folded a Discord member); the rise and going by a rule set chosen as a setting, each number citing its source and how it was checked (OSHA 1910.25/.29 read in the regulation; IBC 2021 and Approved Document K 2013 from secondary sources, the IBC 12 ft flight limit shown as not read); landings; stringers with the fixing holes; rails, posts and balusters; one assembly per flight and rail with shop drawings, a stair sheet (stringer hole stations, tread detail) and a cut list with weights and CSV. Engine lib
PARTLY BUILT 2026-11-20 (detail-11): stringer ends cut level on the floor and plumb at the upper floor's edge (planes, part.endCuts, length and hole stations follow; cut list = part weight), and a base plate with four anchor holes under each landing post (defaults, not code values; anchors not checked); two ticks in the stair form; old stairs unchanged. lib/steelstair 99 checks, test-steelstair-10 34, real page 28. Rise and guard values never read from the printed codes stay marked unread. BimCraft target added to tools/steelstair/sync.mjs and synced (bim-core-11's element is not written). In /lab (a Discord member) only, not released; not tried by a person.
Community comments
No comments yet
Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.
Sign in or create a free account to add a comment.