Roadmap 0.11, Suggestions and email, 2026-11-17 to 11-18

SU.1944 CivilCraft alignments: a clothoid between two curves of different radii (compound and reverse curves joined by a spiral)

  • Feature
  • Built · in the lab
  • CivilCraft

Asked on /suggest (#1944, 2026-11-17, in Spanish, a retired road engineer, no account): transitions between alignments as clothoids between curves of different radii, and smooth control of the triangulation when the ground model is made.

What exists: a clothoid spiral at either end of ONE curve (Spiral in / Spiral out in the PI table, D7.35); the ground model's contouring and gridding methods (D9.6, partly built). Not there: a spiral that joins TWO curves directly (compound curve, reverse curve, ovoid) with its own lengths and the check of the radii ratio. This row: that spiral between two curves of an alignment, in the PI table and the plan, with the numbers a design standard asks for, kept in LandXML. The triangulation half is a question back to the person (which smoothing, for what surface); D9.6 is the related row.

Not built. Link: suggestion #1944.

BUILT in /lab 2026-11-20 (civil-roads-11): a PI's 'To next' spiral length joins its curve to the next PI's curve (compound or reverse), solved so the run ends on the last tangent; spiral in/out at the outer ends still work. Known answer: Fresnel integrals (Abramowitz and Stegun 7.3, Table 7.7), curvature and heading continuous. Written to LandXML (a reverse one as two spirals) and IFC. Not read back from LandXML/IFC yet. The triangulation half stays a question for the person (owner sends). Tests: bin/test-civilcraft-roads11.mjs, bin/test-civilcraft-compound.mjs, tools/civilcraft-test/browser-roads11.mjs (real page).

Add a comment

Community comments

No comments yet

Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.

Sign in or create a free account to add a comment.