Roadmap 0.11, Multi-axis CAM, turning and probing (Track CAM)
CAM.1 PartCraft Manufacture: 3D roughing of the whole model, level by level
Asked on Discord 2026-11-19 (a free alternative to multi-axis CNC programs); PartCraft's own help listed this as not built. Owner 2026-11-19: put it in 0.11 and build it now. Built in /lab (cam-rough3d.js): operation "3D rough" (under More in the Manufacture toolbar) for flat, bull-nose and ball end mills. A grid over the stock holds the highest the model reaches in each cell; from it a safe tip height at every grid point (the proof is in the file header), so the path cannot cut into the model. Each level: straight rows a stepover apart, then once round the edge of what the tool may reach; an extra level at every flat face; it starts from the stock the earlier operations left; ramps along its own pass, short passes plunge and are counted. Tests (tools/partcraft-test/test-cam-multiaxis.mjs, 148 in all): every cutting point at or above the exact drop cutter for the tool + stock to leave, no gouge and no rapid through stock in the simulation, at least the stock to leave on every face. Browser (browser-cam-11.mjs): the flange in /lab, about 2,300 cm3 removed, no gouge. Help topic rough-3d. Not done: rows are straight lines, not offsets or constant-engagement curves (more lifts and air moves; the first row at each level cuts full width); walls keep up to 2.1 grid cells extra (about 0.5 mm for a D6 tool); no shank or holder check; long programs (130,000 moves for a 200 mm flange with a D6 tool); every edit recomputes the whole program (about a minute on that part). NEVER RUN ON A MACHINE or in a control's simulator: see the hand-check rows. English strings only.
Community comments
No comments yet
Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.
Sign in or create a free account to add a comment.