Roadmap 0.11, Multi-axis CAM, turning and probing (Track CAM)

CAM.2 PartCraft Manufacture: rest machining (a smaller tool cuts only where stock is left)

  • Feature
  • Built · in the lab
  • PartCraft

Asked on Discord 2026-11-19 (a free alternative to multi-axis CNC programs); PartCraft's own help listed this as not built. Owner 2026-11-19: put it in 0.11 and build it now. Built in /lab (cam-rough3d.js, operation "Rest"): the same strategy reading the stock simulation, so a smaller tool after a bigger one only goes where material still stands; stock thinner than the limit, upwards or sideways, is ignored so a hair along a wall does not send it round every wall. Tests: with a D3 tool after a D10 it cuts under half of what the same tool cuts on full stock, removes stock, leaves less, no gouge, no rapid through stock, no cutting point under the exact drop cutter; a repeated roughing finds next to nothing. Help topic rough-3d. Not done: it knows the stock only as well as the simulation's grid (0.1 to 2 mm cells); it is not a pencil or corner-only path; a tilted direction's simulation starts from whole stock, so rest machining from a tilted direction does not see cuts made from other directions. NEVER RUN ON A MACHINE or in a control's simulator: see the hand-check rows. English strings only.

Add a comment

Community comments

No comments yet

Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.

Sign in or create a free account to add a comment.