Roadmap 0.11, Multi-axis CAM, turning and probing (Track CAM)
CAM.3 PartCraft Manufacture: tilted tool directions (3+2) on 4- and 5-axis machines
Asked on Discord 2026-11-19 (a free alternative to multi-axis CNC programs); PartCraft's own help listed this as not built. Owner 2026-11-19: put it in 0.11 and build it now. Built in /lab: Setup > Rotary axes (none, A, B, A and C, B and C; carried by the table or the head; tool-tip control on or off; rotary centre; tilt limit). Every milling operation has a Tool tilt and Tilt towards, or "Tool square to a face" and a click. The operation is worked out in the tilted frame (cam.js machineModel with orient), and the posts turn the axes before it (new event `index`), write X Y Z as the turned table carries the part, or the part's own coordinates with G43.4 under tool-tip control. Arcs and canned cycles are kept while the written frame is only turned about Z. A 3-axis machine warns on the operation and the post refuses. Tests: the tool direction rebuilt from the rotary positions equals the one asked for (ac, bc, table, head); a table's turn brings it onto the spindle axis; a tilted facing pass written and read back; a 3-axis program is byte-identical to before. Browser: tilt 90 on the flange gives A-90 C-180. Help topic multi-axis. Not done: no tilted work plane code (G68.2); a tilted direction is simulated on its own (cuts from other directions are not carried over); no machine limits, unwinding or collision zones; which way each axis counts as positive is the machine's and is unverified. NEVER RUN ON A MACHINE or in a control's simulator: see the hand-check rows. English strings only.
Community comments
No comments yet
Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.
Sign in or create a free account to add a comment.