Roadmap 0.11, Multi-axis CAM, turning and probing (Track CAM)

CAM.4 PartCraft Manufacture: 5-axis finishing with the tool leaning as it cuts, and 4th-axis rotary finishing

  • Feature
  • Built · in the lab
  • PartCraft

Asked on Discord 2026-11-19 (a free alternative to multi-axis CNC programs); PartCraft's own help listed this as not built. Owner 2026-11-19: put it in 0.11 and build it now. Built in /lab (cam-multiaxis.js), under More in the Manufacture toolbar. "5-axis": the parallel finishing pass with a ball end mill whose centre keeps the gouge-free 3-axis path while the tool leans to the surface normal, forward along the cut, up to a tilt limit; the lean is cut back where the shank would touch the model. "Rotary": the part turns about work X and a ball end mill pointing at the axis follows the exact drop of a sphere on the mesh, in lines along the axis or rings round the part. Posts: events rapid-rotary, feed-rotary, rotary-end; inverse-time feed (G93) without tool-tip control. Tests: the ball centre (tip + R x direction) never under the surface it may move on and within the tolerance above it; the direction along a sphere's radius within 3 degrees; the radial drop against closed forms (cylinder, square bar) and a brute-force search; G-code read back and turned back by its own A and C to the tool tip within 0.01 mm. Browser: the flange, leaning to 30 degrees. Help topic multi-axis. Not done: ball end mills only; no swarf, flow-line or multi-axis roughing paths; every 5-axis pass is entered and left by a straight lift; NOT run through the stock simulation (a height map cannot hold a leaning cut); holder and machine not checked; about a minute to compute on a 200 mm part. NEVER RUN ON A MACHINE or in a control's simulator: see the hand-check rows. English strings only.

Add a comment

Community comments

No comments yet

Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.

Sign in or create a free account to add a comment.