Roadmap 0.11, Pool and fountain generator add-on (Track POOL)

POOL.1 Pool generator: a pool from length x width x depth (shell, tiles, paving, filters, pipes, machine room)

  • Feature
  • Built · in the lab
  • CadCraft
  • BimCraft
  • SuperCad Studio

Asked on /suggest (#1975): a generator for swimming pools and fountains that starts from A x B x depth: concrete shell, ceramic tiles and paving, filters, pipes and a machine room, indoors or outdoors, to European norms, IFC compatible. Built in /lab 2026-11-19 as an add-on (id pool, off until switched on) on one shared engine, lib/pool, so every app and SuperCad Studio can host it (brief docs/0.11-POOL-SPEC.md). From length, width and the water depth at each end: floor slab on one slope, four walls, entry steps with equal risers, tile finish, coping and paving, skimmers or an overflow channel all round with grating and balance tank, two main drains, inlets, a barrier outdoors. Water volume, flow from the turnover time, filter size, pump power from the person's head figure, pipe sizes from a velocity limit; a machine room sized round the equipment on any side, pipes routed round the pool to it. Quantities: concrete, formwork, steel (an estimate from a ratio), excavation, tiles and pavers to order, pipes by size; CSV report. No norm value is in the generator: empty boxes fill from the spec picked (POOL.4, POOL.5), else from a starting figure that is labelled "not from a standard" everywhere. Equipment sizes are generic steps marked unverified; no maker's catalogue is included (POOL.7). Tests: bin/test-pool.mjs 119 of 119 (volumes, steps and concrete against closed forms, circulation by hand, routing on four sides, the CSV). Limits, plainly: it draws and counts, it does not design. Nothing is checked for strength, uplift, cracking or entrapment; no head loss; rectangles only; pipes stop at the room wall; millimetre input; English only. No engineer has reviewed it and nothing was built from it. The notice says a licensed engineer must design and check the pool.

Add a comment

Community comments

No comments yet

Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.

Sign in or create a free account to add a comment.