Roadmap 0.11, Pool and fountain generator add-on (Track POOL)
POOL.8 Pool generator: other shapes, steps and benches anywhere, gate, bars, ft-in, connected pipes, binder page
Built in /lab (pool add-on 0.11.1, BimCraft + CadCraft, SuperCad Studio through BimCraft): head loss from the routed pipes so the pump head can be calculated (pool-11, 2026-11-20); L-shaped, round or oval and freeform pools (your corners, in mm or feet and inches): shell, tiles, coping, paving, pipe rings, volume and quantities follow the outline, sloping parts written as faceted solids; entry steps on any numbered side and benches along any side (side, from, length; seat depth under the water); a barrier with a gate (IfcDoor GATE) on the side you pick, across several short sides on a round pool; reinforcement as bars: a bar layout and schedule (walls vertical and horizontal, floor both ways) from the ratio, bar size and largest spacing, IfcReinforcingBar per mark; feet and inches input (26'-3", fractions, inches, metres), gallons and feet in the results, ft-in on the CadCraft drawing; pipes as one connected network: straight lengths, bends and junctions, tails to every terminal and the machine room pipework to the pumps and filters, with IfcDistributionPorts and IfcRelConnectsPorts in the IFC file and in BimCraft's model; a Markdown calculation page that SuperCad Studio's report binder sets under Calculations while the tab is open; SuperCad Studio host (super-hosts-11); 75 languages for the 0.11.0 words (lang-11). Limits: the machine room pipes are laid out square by fixed offsets and not checked for clashes, no valves; head loss counts the routed runs only; the bar schedule is one layer each way, lap and stock length starting figures, not a reinforcement design. Tests: bin/test-pool.mjs 201/0 (closed forms for each shape, benches, gate, bars, units, ports), tools/pool/browser.mjs 30/0 (real lab pages: an L-shaped pool with bench, gate and bars placed in BimCraft with every port and connection, US units, CadCraft drawing in ft-in). Log docs/0.11-sessions/pool-11.md.
Community comments
No comments yet
Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.
Sign in or create a free account to add a comment.