Roadmap 0.11, Model takeoff (Track MT)

MT.2 TakeoffCraft: model takeoff straight from an .rvt project file (lab only)

  • Feature
  • Built · in the lab
  • TakeoffCraft

In the lab, an .rvt project saved in 2023 to 2026 opens in Model takeoff like an IFC file: it is converted on the person's computer by the open-source reader BimCraft's lab preview already uses (0.5 SG.8 b), then measured the same way. The panel says it is a lab preview, how many elements were found and how many came in as plain boxes because their real shape was not read; boxes are counted and never measured. When no wall, floor or roof was read it says this is not the whole building. Older projects, families, templates and cut-off copies are refused with a reason. Outside the lab an .rvt file gets a line asking for an IFC export.

The reader is handed to the page in the lab only (ui.inc data-rvt-model, never the manifest), so editions, the public repo and Studio do not carry it. It cannot be released before the legal look (SG.8-LEGAL) and more real projects (SG.8-RVT): on the owner's 2025 project BimCraft's preview read 235 fixtures and no walls.

Checked on the two MIT sample projects (2023: 37 elements; 2024: 854 elements, 116 rooms, 138 boxes = every door and window, 97 quantities): counts and boxes equal the converter's own summary. Not checked: any 2025 or 2026 project, the owner's 148 MB project (a workstation job), MEP or structural models.

Waits on: Leaves the lab only with BimCraft's preview: after SG.8-LEGAL (legal look at the .rvt reader)

From: Discord community

Add a comment

Community comments

No comments yet

Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.

Sign in or create a free account to add a comment.