Roadmap 0.11, Dome generator add-on (Track DOME)
DOME.1 Dome generator: a thin concrete shell dome from diameter and height (shell, stem wall, ring beam, openings, foam and form)
Asked on Discord 2026-11-20 by a member designing a concrete shell dome to hand to an engineer: "an add-in for concrete shell construction that includes even just the basics", with an extrusion above ground. Built in /lab 2026-11-20 as an add-on (id dome, off until switched on) on one shared engine, lib/dome, so every app and SuperCad Studio can host it (brief docs/0.11-DOME-SPEC.md). Modelled on the Pool generator (POOL.1). From the diameter and height of the inflated form: part of a sphere up to a half sphere, or half an ellipse (flatter or taller), on an optional straight stem wall (the "extrusion above ground" asked for). Layers from the outside in: form membrane, sprayed foam, a concrete shell that thickens evenly toward the base, on a ring beam with a floor slab inside it. Up to twelve doors and windows by angle, width, height and sill, cut as real gaps; one that overlaps another or reaches the crown is left out and named. Quantities: membrane area to order, foam, sprayed concrete with the person's rebound allowance, ring beam and slab, a steel estimate from a ratio. The room inside: clear diameter and height, floor area, floor with the headroom asked, volume. CSV report. No norm value is in the generator: empty boxes fill from the spec picked (DOME.4, DOME.5), else from a starting figure labelled "not from a standard" everywhere. Tests: bin/test-dome.mjs 179 of 179 (surface, volume and concrete of a half sphere, a cap and both ellipsoids against closed forms within 1 part in 100,000; stem wall, ring beam and slab exact; openings). Limits, plainly: it draws and counts, it does not design. Round plans only, at most a half sphere, no joined domes; openings have radial sides; no bars drawn. Frames, a bar count and feet and inches: DOME.10. No engineer has reviewed it and nothing was built from it. The notice says a licensed engineer must design and check the dome.
Community comments
No comments yet
Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.
Sign in or create a free account to add a comment.