Roadmap 0.11, Dome generator add-on (Track DOME)

DOME.2 Dome generator in BimCraft and CadCraft: the dome as IFC elements, as a plan and section, and as an IFC file

  • Feature
  • Built · in the lab
  • CadCraft
  • BimCraft

Asked on Discord 2026-11-20 by a member designing a concrete shell dome to hand to an engineer: "an add-in for concrete shell construction that includes even just the basics", with an extrusion above ground. Built in /lab 2026-11-20 (BimCraft a Discord member and CadCraft a Discord member, add-on dome, right-panel tab Dome generator). BimCraft: Place in the model writes the dome on the model's first level as six elements in their own classes (IfcFooting for the ring beam, IfcSlab, IfcWall for the stem wall, IfcRoof of type DOME_ROOF for the shell, IfcCovering for the foam and the membrane), each a set of revolved solids (the true surface of revolution of a many-sided profile, not a faceted mesh) with a colour, a CadCraft_Dome property set and base quantities. One undo step; placing again replaces the dome of the same name; Remove takes exactly those elements out; Position moves its centre; remarks go to Problems. CadCraft: Draw plan and section puts circles, arcs broken at the doors, polylines, text and dimensions on DOME- layers in the drawing's own units, one undo step, and Remove clears them. Both: Save as an IFC file writes an IFC4 file from the same element list, with the design figures and first forces on the building; Save the report writes the CSV. Tests: tools/dome/browser.mjs 31 of 31 on the real lab pages (switch on, pick specs, break a spec, edit openings by their own buttons, place 6 elements and 23 solids in the showcase house, replace, downloads, remove; CadCraft draw, undo, remove; no console error). Our own IFC reader reads the file back with every attribute in place. Looked at: the saved file opened in BimCraft's lab build from the front, the side and in 3D, with door and window cuts; the CadCraft drawing. Not done: the IFC file not opened in another vendor's program; nothing drawn in 3D in CadCraft; the section is cut between openings. Undo and SuperCad Studio: DOME.10.

Add a comment

Community comments

No comments yet

Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.

Sign in or create a free account to add a comment.