Roadmap 0.11, Dome generator add-on (Track DOME)

DOME.3 Dome generator: first membrane forces for the engineer (force along and round the dome, ring tension, ground pressure)

  • Feature
  • Built · in the lab
  • CadCraft
  • BimCraft
  • SuperCad Studio

Asked on Discord 2026-11-20 by a member designing a concrete shell dome to hand to an engineer: "an add-in for concrete shell construction that includes even just the basics", with an extrusion above ground. The requester designs the dome to hand to an engineer; this gives that engineer figures to start from. Built in /lab 2026-11-20 (lib/dome membrane.js). Membrane theory of a shell of revolution under loads that are the same all the way round, on the concrete's mid-surface: the force along the curve is the load above a parallel over 2 pi r0 sin phi, the force round the dome follows from N_phi / r1 + N_theta / r2 = -Z with the true principal radii of the sphere or ellipse. Loads: the shell's own weight (density times the varying thickness), an extra load on the shell, and the person's snow load on plan; unfactored. Shown at nine heights with stresses, plus the largest compression, where tension round the dome begins, the outward push and ring tension at the springline, the downward load, the pressure under the ring beam (dome, stem wall and beam), and, only when the person types a steel stress, force divided by that stress as a steel area. In the panel, the CSV and on the IFC building. Tests (bin/test-dome.mjs): a half sphere matches the textbook N_phi = -qR/(1+cos phi) and N_theta = qR(1/(1+cos phi) - cos phi) at nine heights to five decimals, hoop tension begins at 51.83 degrees, snow adds -pR/2, a low dome's ring tension is push times radius, an ellipsoid's springline carries exactly the load above it. Since 2026-11-21 load factors come from the spec, the base of a low dome is taken where the concrete meets the springline, and bending, wind, earthquake, buckling and opening forces are rows DOME.8 and DOME.9. Limits: not a design; uneven snow, temperature, shrinkage, cracking and creep are not covered. No engineer has reviewed it.

Add a comment

Community comments

No comments yet

Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.

Sign in or create a free account to add a comment.