Roadmap 0.11, Dome generator add-on (Track DOME)
DOME.4 Dome spec side add-on: United States (ACI thin shell code and the building code)
Asked on Discord 2026-11-20 by a member designing a concrete shell dome to hand to an engineer: "an add-in for concrete shell construction that includes even just the basics", with an extrusion above ground. Built in /lab 2026-11-20, researched again 2026-11-21 (version 0.11.1): a data pack, format cadcraft-dome-spec v1, made by tools/dome/make-packs.mjs from tools/dome/research/us.json. 35 rules: 14 read in the code's own text, 15 in documents that quote it, 6 not read. Used as numbers: shell cover 12.7 mm, cover against earth 76.2 mm, concrete 20.7 MPa, steel ratio 0.0018, bar spacing 457 mm (now checked against the bars typed), bar yield 414 MPa, and the load factors 1.4 on own weight alone, 1.2 with other loads, 0.9 where it helps, 1.6 on snow, 1.0 on wind and earthquake. Shown as sentences, the ones needing a decision also as notes under Checks: buckling, analysis, tension steel, edge members, openings, sprayed concrete, loads, earthquake method, strength reduction, foam plastic and the thermal barrier, frost. Partly built because the values are unchecked: every shell value is still ACI 318.2-14 (the 2019 and 2025 texts are not free; their Minimum thickness section could not be read, so no minimum thickness is given). The load factors were read in IBC 2018 as Utah adopted it, since IBC 2021 only points to ASCE 7. Four rules are held back because their only sources are ones we do not cite (another software maker's article for wind and snow on domes; an unofficial copy of ACI 372R for the stiffness formula and the dome buckling formula): they say so. California's 4000 psi shotcrete strength (public schools and hospitals) is shown, never used as a general minimum. IBC 2603.4.1.1 waives the thermal barrier over foam only where concrete covers it on each face: a question for the building official, now raised as a note. Not read: ASCE 7, ACI 334.1, ACI 506R.
Community comments
No comments yet
Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.
Sign in or create a free account to add a comment.