Roadmap 0.11, Dome generator add-on (Track DOME)

DOME.5 Dome spec side add-on: Europe (Eurocode 2 and the EN sprayed concrete standards)

  • Feature
  • Built · in the lab
  • CadCraft
  • BimCraft
  • SuperCad Studio

Asked on Discord 2026-11-20 by a member designing a concrete shell dome to hand to an engineer: "an add-in for concrete shell construction that includes even just the basics", with an extrusion above ground. Built in /lab 2026-11-20, researched again 2026-11-21 (version 0.11.1): a data pack, format cadcraft-dome-spec v1, made by tools/dome/make-packs.mjs from tools/dome/research/eu.json. 35 rules: 31 read in the standard's own text, 2 in documents that quote it, 2 not read. Used as numbers: cover 15 mm, cover against prepared ground 40 mm, class C20/25 read as 20 MPa, steel ratio 0.0013, bar spacing 400 mm (now checked against the bars typed), bar yield 500 MPa, and EN 1990's recommended load factors 1.35 on permanent actions, 1.0 where they help, 1.5 on snow or wind as the leading action, 1.0 on the seismic action. Shown as sentences: second-order effects for shells, analysis (EN 1992-2 Annex LL), tension steel (Annex F), tying, openings, sprayed concrete (EN 14487), wind on domes (EN 1991-1-4 7.2.8), snow (no dome clause), the lateral force method, material factors, the stiffness formula with its table values, fire classes and sprayed foam (EN 14315-1), frost. Partly built because the values are unchecked: EN 1992-1-1 was read in its 2004 edition (for 2023 only the contents, which list an Annex G on shells) and its values are recommended ones a national annex may change. No minimum thickness and no sprayed concrete strength class could be read. There is no Eurocode buckling formula for shells in the text read: the guidance shown is from a university dissertation describing the published reduction-factor method and the old German safety factor of 5; the IASS recommendations themselves were not read. The dome wind figure is a graph with no printed values. Some factors were read on page images because the scan's text layer drops them.

Waits on: Owner: read the sprayed-concrete EN, the on-site foam standard, a snow clause for domes; national annexes

Add a comment

Community comments

No comments yet

Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.

Sign in or create a free account to add a comment.