Roadmap 0.11, Dome generator add-on (Track DOME)

DOME.8 Dome generator: bending from a real shell solution (ring beam, stem wall junction, thickness changes)

  • Feature
  • Built · in the lab
  • CadCraft
  • BimCraft
  • SuperCad Studio

Asked on Discord 2026-11-20 by a member designing a concrete shell dome to hand to an engineer: "an add-in for concrete shell construction that includes even just the basics", with an extrusion above ground. Owner 2026-11-21: complete the weak items so the add-on is feature rich. Built in /lab the same day (lib/dome shellfe.js, bending.js; add-on version 0.11.1). Membrane theory cannot say what happens where the shell is held. The dome, its stem wall and its base are now solved as a thin elastic shell of revolution with the classic conical-frustum element (three movements a node, about 280 pieces over the curve and 25 mm pieces up the wall, banded solver, about 30 ms), for own weight and for own weight with snow, with the load factors in force. The person chooses how the base is held: fixed to the ring beam, held but free to turn, or free to spread against the ring beam's own stretch. Results at nine heights (forces and moments along and round), the moment at the base, the largest moment and where, the outward push and the tension in the ring beam, the largest tension and compression stress with the face and height, how far the crown drops and the base spreads. In the panel, the CSV and on the IFC building. Tests (bin/test-dome.mjs): the solver against results that do not depend on it (a long cylinder clamped at one end under pressure: edge moment p/2β² within 0.02 %, edge shear p/β; a pressurised sphere: pR/2, no bending); in the dome it carries the same weight as the membrane sum, agrees with membrane theory half way up, has no base moment when the base may turn, gives a low dome's ring beam tension within 5 % of push times radius, and puts the largest moment of a dome on a stem wall at their junction. Limits: linear, elastic, uncracked concrete with the stiffness typed; loads that are the same all the way round only (not wind, earthquake or openings); no creep, shrinkage or temperature. No engineer has reviewed it.

Add a comment

Community comments

No comments yet

Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.

Sign in or create a free account to add a comment.