Roadmap 0.11, Dome generator add-on (Track DOME)
DOME.9 Dome generator: wind, earthquake, load factors, buckling and the forces openings interrupt
Asked on Discord 2026-11-20 by a member designing a concrete shell dome to hand to an engineer: "an add-in for concrete shell construction that includes even just the basics", with an extrusion above ground. Owner 2026-11-21: complete the weak items. Built in /lab the same day (lib/dome membrane.js; add-on version 0.11.1). Load factors: six figures the spec governs (own weight alone, with other loads, where it helps; snow; wind; earthquake), 1 with no spec and then every table says Unfactored; a spec fills them from its code (DOME.4, DOME.5) and a factor of your own on the unsafe side is reported. Wind and earthquake: a load that varies round the dome as the cosine of the angle is solved by statics for any shell of revolution (the part above a parallel is pushed by F and turned over by M; force along = -M / (pi r0^2 sin phi)), giving forces along, round and in shear at nine heights, the sideways force and overturning at the floor, and whether one side of the base lifts with the least own weight, with a steel area when a stress is typed. Buckling: the classical pressure 2Et^2 / (sqrt(3(1-nu^2)) r1 r2) against the load pressing on the shell where that ratio is smallest; no margin is shown until the person types their engineer's reduction. Openings: the force along the curve over each head (half to each side) and the force round the dome its height cuts. Tests (bin/test-dome.mjs): wind on a half sphere matches Timoshenko's closed form in all three forces at every height, the sideways force is (2/3) pi R^2 p; an earthquake's force is the share of the weight and its overturning that times R/2; factored cases are exactly 1.4 D and 1.2 D + 1.6 S; buckling and opening forces by hand. Limits: the wind is the textbook pattern, not a code's coefficients (those clauses could not be read in a source we cite); the earthquake is a static sideways force; no bending under either; the bending round an opening is not calculated. No engineer has reviewed it.
Community comments
No comments yet
Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.
Sign in or create a free account to add a comment.