Roadmap 0.11, Reinforced concrete detailing (Track RC)

RC.1 DetailCraft: reinforced concrete detailing for beams, columns, slabs and walls, with reinforcement read from IFC and updated shop drawings out

  • Feature
  • Built · in the lab
  • DetailCraft

Asked (email, 2026-11-02): DetailCraft advertises rebar placement, bending schedules and shop drawings, but today only rectangular pad footings have rebar (mat both ways with hooks, starters; ACI/BS shapes; cut list; congestion map). The requester's workflow: import structure and reinforcement designed in CYPECAD, review and adjust laps, anchorage, stirrups and bar arrangements, then regenerate shop drawings and bending schedules.

Do (in order): (1) rebar detailing for beams and columns: longitudinal bars, stirrups and ties with hooks (ACI 318-19 / BS 8666 shapes already in rebar.js), spacing zones, cover; (2) lap splices and anchorage / development lengths as checked, editable detailing (Problems source detailcraft.rebar); (3) slabs and walls: mats, edge and opening trimmers; (4) bar marks and a bending schedule over the whole structure, and shop drawings (elevation, section, bar-bending sheets) that regenerate on every change; (5) bring reinforcement in from CYPECAD: first IFC (IfcReinforcingBar as swept disks, I.5 swept solids) and whatever the sample export shows (CYPECAD's own formats), with a report of what was read; (6) IFC rebar read back (today footings and rebar are skipped on import). Related: SU.1056 (concrete design checks), EG.74 (congestion map), TK.2 (conc…

Verified 2026-11-20 (0.11 close-out), steps 1-4 and 6 and reading bars from IFC: tools/rc/test.mjs 124/0, tools/detailcraft-test/browser-rc.mjs 36/0 in /lab, bin/test-detailcraft.mjs 13111/0, bin/test-problems.mjs 139/0; buildingSMART's IFC4.3 sample files reinforcing-assembly (34 of 34 bars) and reinforcing-stirrup (1 of 1) import with their sizes and host. NOT verified: a CYPECAD file. None was ever sent and none is published (searched 2026-11-20); CYPECAD writes reinforcement as IFC from 2025.c with a paid module, so the title no longer names it. That check and the engineer review are RC.1-HAND; the values to confirm are RC.2; cross-ties, round columns and the other shapes not built are RC.3.

From: customer email, 2026-11-02

Add a comment

Community comments

No comments yet

Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.

Sign in or create a free account to add a comment.