Roadmap 0.11, Digital twin add-on (TW)

TW.13 Digital twin: behaviours on imported CAD

  • Feature
  • Partly built
  • ModelCraft

Built in the lab (Digital twin add-on, ModelCraft, off by default): a face of an imported STEP part can be given a job as data saved in the model file, the part itself untouched. Pick a face with the mesh kernel's own picker, then: a conveyor surface (direction along or across the face's long side, either way, and speed), a joint (turning about a round face's axis or a flat face's normal, or sliding along a flat face's normal; lowest, highest, start, rate), or a sensor (a beam out of a flat face, range). Checked against known answers on real STEP files from fixtures/step (box.step, plate.step; also through the app's own Import and a real click): a load at rest on a conveyor face arrives when the friction formula says (within 4 to 5 %), a load at belt speed in distance over speed, an 8 degree incline likewise, twice the speed halves the time; a point turned 90 degrees about a hole's axis lands where geometry puts it and a joint stops at its limit; a beam breaks and clears when the load's edges pass it. A job survives a re-import where its face can be matched (same plane or axis in the same place: found, found under a new number, or found with a different size, said in words); if no face fits or two fit equally it is lost with the reason and does nothing until the face is picked again. Measured: the solver carries a load about 3 % faster than the belt. Not yet: jobs are run in the physics check on the part itself, not read by Material flow's runs; a joint does not move the part in the view or carry other parts; a conveyor face is its bounding rectangle; round faces the importer cut unevenly read as plain faces and cannot be a joint axis. Not tested: a real machine part from a customer, a GPU. Help: twin-behaviours (

LANDED 2026-11-20 (inbox-11d) ModelCraft viewer hook view3d.js setDisplayMatrix(defId, M16|null) (display only, never saved, not in undo, survives a rebuild); tools/modelcraft-test/display-matrix.mjs 11/0. The twin add-on does not call it yet. (inbox-11d)

Waits on: The twin add-on moving the model's part with the hook; a real-page run (lab sign-in); languages; TW.13-HAND

Add a comment

Community comments

No comments yet

Add detail as we go: how you would use it, files or steps that show the problem, what other programs do. The team reads every comment.

Sign in or create a free account to add a comment.