Calculations

Calculations

• Carcass depth behind a face frame

  The depth the carcass is built with when a face frame takes part of the cabinet's depth.

  d = max(1, d − frame thickness)

  CabinetCraft parts, fronts and face frames addons/cabinetcraft/lib/build.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Face-frame openings and overlay fronts

  The rails, the openings between them and the doors or drawer fronts that cover each opening.

  opening h = (box h − (2 + mids) × rail) ÷ (mids + 1); front h = opening h + lap below + lap above; pair door w = (opening w + 2 × overlay − gap) ÷ 2

  CabinetCraft parts, fronts and face frames addons/cabinetcraft/lib/build.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Door and blind panel of a blind corner

  The door over the open part of a blind corner cabinet and the panel over the blind part.

  door w = (w − blind) − reveal; panel w = blind − reveal; h = box h − reveal

  CabinetCraft parts, fronts and face frames addons/cabinetcraft/lib/build.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Part size stored in the cut list

  Adds one part with its length, width, thickness and material.

  CabinetCraft parts, fronts and face frames addons/cabinetcraft/lib/build.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Frame rail length and counts

  The length of the frame's rails and how many rails and mid rails a cabinet needs.

  rail length = w − 2 × stile − blind

  CabinetCraft parts, fronts and face frames addons/cabinetcraft/lib/build.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Doors and drawer fronts counted by size

  Groups equal fronts into one cut-list line with a quantity.

  CabinetCraft parts, fronts and face frames addons/cabinetcraft/lib/build.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  Exact

• Drawer boxes of a face-frame cabinet

  The sides, ends and bottom of each drawer box behind a face frame.

  box h = min(front h − clearance, opening h − 20 mm); end = bw − 2t; bottom = (bw − 2t + 2g) × (slide − 2t + 2g); bw = opening w − 2 × slide gap

  CabinetCraft parts, fronts and face frames addons/cabinetcraft/lib/build.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Dowels of a corner cabinet

  The number of dowels a corner cabinet's drilling needs.

  dowels = dowel holes ÷ 2

  CabinetCraft parts, fronts and face frames addons/cabinetcraft/lib/build.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Curved cabinet outline in the cell's own axes

  The outline points of a made-to-order curved cabinet, measured from the cell's origin along its two axes.

  (x′, y′) = ((q − o) · u, (q − o) · n)

  CabinetCraft parts, fronts and face frames addons/cabinetcraft/lib/build.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Closing panel of an angled corner

  The height of the panel that closes a corner which is not a right angle.

  height = cabinet h − plinth height

  CabinetCraft parts, fronts and face frames addons/cabinetcraft/lib/build.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Picked room corner

  A corner of the room outline picked on the plan, snapped to the grid.

  p = round(x ÷ g) × g; g = 50 (mm job) or 2 (inch job)

  CabinetCraft room picking and dry-run units addons/cabinetcraft/main.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Direction of the picked outline

  Whether the corners were picked clockwise, which decides the sign of each arc's sweep.

  Σ (xᵢ × yᵢ₊₁ − xᵢ₊₁ × yᵢ) < 0 means clockwise

  CabinetCraft room picking and dry-run units addons/cabinetcraft/main.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Sheet size in the program's units

  The sheet size, thickness and rapid rate the dry run checks a G-code program against.

  k = (1 ÷ 25.4 or 1) × (25.4 or 1); sheet = job sheet × k; rapid (inch program) = rapid ÷ 25.4

  CabinetCraft room picking and dry-run units addons/cabinetcraft/main.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Numbers on labels and the maker review

  Writes a number with at most 2 decimals.

  text = round(v × 100) ÷ 100

  CabinetCraft room picking and dry-run units addons/cabinetcraft/main.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Job converted to the other unit

  Every size in the job converted from millimeters to inches or back when the job's unit is changed.

  to inches: round(v × (1 ÷ 25.4) × 16) ÷ 16; to millimeters: round(v × 25.4)

  Cabinet job edits that change sizes addons/cabinetcraft/lib/edit.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Gap at a door or window

  The width of the gap put in a run's floor row so that the cabinets after it clear an opening.

  width = ⌈(at + w + clear − start) × 10⌉ ÷ 10

  Cabinet job edits that change sizes addons/cabinetcraft/lib/edit.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Filler for a leftover

  Adds a filler as wide as the space a row leaves on its wall.

  filler width = rest, when 0.5 < rest ≤ 75 mm

  Cabinet job edits that change sizes addons/cabinetcraft/lib/edit.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Notch of a new L or U room

  The first size of the notch when a rectangular room is made L or U shaped.

  notch width = round(W ÷ 3); notch depth = round(D ÷ 2)

  Cabinet job edits that change sizes addons/cabinetcraft/lib/edit.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Drilling distances in inches

  The 32 mm system's drilling and hardware distances for the inch rule set.

  value = round(mm × (1 ÷ 25.4) × 10⁴) ÷ 10⁴

  Cabinet parts from a box and construction rules addons/cabinetcraft/lib/model.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Box sizes

  The box height without the plinth, the inside width and the depth the back takes.

  boxH = h − kick; iw = w − 2t; backDepth = backSetback + backT

  Cabinet parts from a box and construction rules addons/cabinetcraft/lib/model.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Door and drawer front sizes

  The size and position of every door and drawer front in the cabinet's front view.

  one door: (w − reveal) × (boxH − reveal); a pair: each (w − 2·reveal) ÷ 2 wide; n drawer fronts: each (boxH − n·reveal) ÷ n high

  Cabinet parts from a box and construction rules addons/cabinetcraft/lib/model.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Longest drawer slide that fits

  Picks the drawer slide length from the rule's list for the cabinet's inside depth.

  room = panel depth − backDepth − drawerBackClear; the longest listed L with L ≤ room + 1e-9

  Cabinet parts from a box and construction rules addons/cabinetcraft/lib/model.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Part list of one cabinet

  Every part of a cabinet with its length, width, thickness, material, quantity and banded edges.

  back in grooves: (iw + 2·groove) × (boxH − n·t + n·groove); shelf: (iw − 2·shelfClear) × (inside depth − shelfFront); drawer end: iw − 2·slideGap − 2·drawerT

  Cabinet parts from a box and construction rules addons/cabinetcraft/lib/model.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Size checks on a cabinet

  Reports a cabinet that is too narrow, too low or too shallow for its parts, or whose drawers do not fit.

  iw ≤ 0; boxH ≤ 2t; inside depth ≤ shelfFront; Σ fronts + n·reveal > boxH + 1e-9

  Cabinet parts from a box and construction rules addons/cabinetcraft/lib/model.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Linear stock to buy

  The number of pieces and the total length of each hardwood section in the job.

  length = Σ qty × length; pieces = Σ qty

  Cabinet job totals: linear stock and sheet count addons/cabinetcraft/lib/sheets.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Sheets used by a nested job

  The total number of sheets over all materials, with each material's own count and efficiency.

  sheets = Σ sheets per material

  Cabinet job totals: linear stock and sheet count addons/cabinetcraft/lib/sheets.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  Exact

• Label position on the sheet

  Where each label is printed on the page, so that it lands on the die-cut label.

  x = left + col × (label width + gap x); y = top + row × (label height + gap y)

  Part labels on label sheets addons/cabinetcraft/lib/cutlist/labels.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Bar code module width

  The width of the narrowest bar of a label's Code 128 bar code, fitted to the space beside the id text.

  module = min(0.33 mm, room ÷ (code width + 20))

  Part labels on label sheets addons/cabinetcraft/lib/cutlist/labels.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Pieces from quantities

  One entry per piece to cut, from rows with a quantity.

  Cutting profile pieces from stock bars addons/windows/lib/cutlist/bars.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Length a bar takes

  The length of bar used by a set of pieces, with the saw kerf and the saving when mitred ends share a cut.

  used = Σ (length + kerf) − depth × min(⌊mitred ends ÷ 2⌋, mitred pieces − 1)

  Cutting profile pieces from stock bars addons/windows/lib/cutlist/bars.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Fewest bars for one stock length

  Which pieces go on which bar, and whether the count is proven to be the fewest.

  bound = ⌈Σ (length + kerf) ÷ usable − 1e-9⌉; usable = stock − trim at both ends

  Cutting profile pieces from stock bars addons/windows/lib/cutlist/bars.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Bars, cut positions, offcuts and waste

  The list of bars with each piece's start position, the offcut left on each bar and the totals.

  pos accumulates length + kerf; offcut = stock − trims − used; waste % = round((1 − piece length ÷ stock length) × 10⁴) ÷ 100

  Cutting profile pieces from stock bars addons/windows/lib/cutlist/bars.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Totals over all profiles

  The number of bars, the piece length, the stock length and the waste over every profile and color.

  waste = Σ stock length − Σ piece length

  Cutting profile pieces from stock bars addons/windows/lib/cutlist/bars.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Raw double, read

  A 64-bit value read from eight bytes of the bit stream.

  Numbers in a DWG file, read and written bit for bit dwg/bits-read.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  64-bit

• Bit double, read

  A value stored as a two-bit code: a full 64-bit value, exactly 1.0 or exactly 0.0.

  Numbers in a DWG file, read and written bit for bit dwg/bits-read.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  64-bit

• Double with default, read

  A value stored as the bytes in which it differs from a default value.

  Numbers in a DWG file, read and written bit for bit dwg/bits-read.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  64-bit

• 64-bit whole number, read

  An unsigned 64-bit whole number from two 32-bit halves.

  value = high × 2³² + low

  Numbers in a DWG file, read and written bit for bit dwg/bits-read.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  64-bit

• Bit long long, read

  A whole number of up to seven bytes, the count given by three bits.

  value = Σ byteᵢ × 256ⁱ

  Numbers in a DWG file, read and written bit for bit dwg/bits-read.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  64-bit

• Handle reference, read

  An object handle, absolute or as an offset from another handle.

  value = Σ byte × 256ᵏ; codes 6, 8, A, C: ref + 1, ref − 1, ref + value, ref − value

  Numbers in a DWG file, read and written bit for bit dwg/bits-read.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  64-bit

• Modular char, read

  A signed whole number stored seven bits per byte.

  value = Σ (byte & 0x7F) × 2^(7i); the last byte carries 6 bits and the sign

  Numbers in a DWG file, read and written bit for bit dwg/bits-read.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  64-bit

• Raw double, written

  A 64-bit value written as its eight bytes.

  Numbers in a DWG file, read and written bit for bit dwg/bits-write.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  64-bit

• Bit double, written

  A value written as a two-bit code for exactly 0.0 or 1.0, or as a full 64-bit value.

  Numbers in a DWG file, read and written bit for bit dwg/bits-write.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  64-bit

• Double with default, written

  A value written as a two-bit code when it equals its default, or in full.

  Numbers in a DWG file, read and written bit for bit dwg/bits-write.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  64-bit

• Thickness, written

  A thickness written as one bit when it is zero, or as a bit double.

  Numbers in a DWG file, read and written bit for bit dwg/bits-write.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  64-bit

• Bit long, written

  A 32-bit whole number in its short or full form.

  Numbers in a DWG file, read and written bit for bit dwg/bits-write.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  Exact

• Bit short, written

  A 16-bit whole number in its short or full form.

  Numbers in a DWG file, read and written bit for bit dwg/bits-write.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  Exact

• Bit long long, written

  A 64-bit whole number as a three-bit byte count and its bytes.

  Numbers in a DWG file, read and written bit for bit dwg/bits-write.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  Exact

• Point, written

  The three coordinates of a point as bit doubles.

  Numbers in a DWG file, read and written bit for bit dwg/bits-write.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  64-bit

• Handle bytes, written

  A handle as its bytes, most significant first.

  byte = v mod 256; v = ⌊v ÷ 256⌋

  Numbers in a DWG file, read and written bit for bit dwg/bits-write.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • TakeoffCraft
  • CivilCraft
  • DetailCraft
  • PartCraft
  Exact

• Rational tag value

  A TIFF RATIONAL (two 32-bit integers) as one number.

  value = numerator ÷ denominator

  TIFF scan resolution raster/tiff.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • CivilCraft
  • PartCraft
  64-bit