Calculations

Calculations

• Dimensions

  The linear dimensions of a shop drawing as dimension objects.

  p₁, p₂ → r4; line position = p + offset → r4; dimension scale = max(0.01, text height ÷ 2.5) → r4

  Cabinet shop drawings as drawing objects addons/cabinetcraft/lib/cadents.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Scaling to the drawing's unit

  Every coordinate, text height and dimension scale multiplied by the drawing units per job unit.

  v → r4(v × k)

  Cabinet shop drawings as drawing objects addons/cabinetcraft/lib/cadents.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Scaling all sheets

  All blocks and sheets scaled to the drawing's unit.

  k = 1 → unchanged; else every block and sheet through scaleEnts, sheet w and h × k

  Cabinet shop drawings as drawing objects addons/cabinetcraft/lib/cadents.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Moving a sheet into place

  The objects of a sheet moved by an offset.

  x → r4(x + dx); y → r4(y + dy)

  Cabinet shop drawings as drawing objects addons/cabinetcraft/lib/cadents.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Board corners in the blank's own frame

  Turns a board's corners from the cabinet frame into the frame of its blank, and takes the blank's length and width.

  x′ = (p − o)·uₓ; y′ = (p − o)·u_y; L = max x′; W = max y′

  Corner cabinet drilling positions addons/cabinetcraft/lib/cornerdrill.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Arm boards and triangle of a corner cabinet

  The outlines of the bottom and top boards for each corner form, from the cabinet's width, depth and panel thickness.

  Corner cabinet drilling positions addons/cabinetcraft/lib/cornerdrill.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Joint lines two boards share

  Finds where an edge of one board lies along an edge of another, and the length of the overlap.

  offset = (q − p₀) × u; s = (q − p₀)·u; overlap = [max(0, min s), min(L, max s)]

  Corner cabinet drilling positions addons/cabinetcraft/lib/cornerdrill.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• System hole grid along a side

  The positions of the system holes along a side panel.

  x = sysStart, sysStart + pitch, … while x ≤ len − sysStart

  Corner cabinet drilling positions addons/cabinetcraft/lib/cornerdrill.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Hinge plate holes

  Places the two plate holes of each hinge on the system grid of the side panel.

  center = reveal ÷ 2 + hinge spot; first hole = grid hole nearest (center − pitch ÷ 2); second = first + pitch

  Corner cabinet drilling positions addons/cabinetcraft/lib/cornerdrill.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Fixing holes along a joint

  Places the dowel or cam holes on the edge two boards share, in each board's own frame.

  P = p + (q − p) ÷ len × u, u = sysStart and len − sysStart, or len ÷ 2

  Corner cabinet drilling positions addons/cabinetcraft/lib/cornerdrill.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Edge holes kept on the blank

  Moves an edge hole back onto the blank when the cut part is a little smaller than the drawn board.

  x = min(max(x, 0), part length); y = min(max(y, 0), part width)

  Corner cabinet drilling positions addons/cabinetcraft/lib/cornerdrill.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Corners of a rectangle, L or U room

  The corner list of a room from its width, depth and notch.

  U notch start a = (W − notch w) ÷ 2

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Right-angled outline made safe

  Checks a typed outline with right angles, drops repeated and collinear corners, makes it counter-clockwise and moves it to (0, 0).

  2A = Σ (xᵢ yᵢ₊₁ − xᵢ₊₁ yᵢ); reject when |2A| < 1

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Do two edges cross

  Decides whether two outline edges properly cross.

  o(p, q, r) = (q − p) × (r − p); cross when the signs differ on both segments

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Arc walls as chords

  Writes each arc wall out as short chords so the room can be tested as a polygon.

  step = 2 × acos(max(0, 1 − 0.5 ÷ r)); n = ⌈|sweep| ÷ step⌉, between 4 and 400

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Free outline with slanted and arc walls

  Checks an outline of any angle with arc edges and returns its corners, arcs and overall width and depth.

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Wall frames, lengths and corner turns

  For each wall: its length, direction, the frame cabinets are placed in, its angle and the turn at each corner.

  chord = √(Δx² + Δy²); u = Δ ÷ chord; n = (−u_y, uₓ); angle = atan2(u_y, uₓ) × 180 ÷ π

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Point inside the room

  Tests whether a point is inside the outline; the boundary counts as inside.

  on edge when |cross| < 1e-4 × max(1, edge length); else even-odd count of edges crossed by a ray

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Cabinet footprint inside the room

  Decides whether a polygon lies inside the room.

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Distance from a point to a wall segment

  The shortest distance from a point to a segment.

  t = clamp((p − a)·(b − a) ÷ |b − a|², 0, 1); d = |p − (a + t (b − a))|

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Clearance from a footprint to the nearest wall

  The smallest distance between a footprint and any wall, 0 when they touch or cross.

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Door and window positions along a wall

  Clamps each opening's width, offset, height and sill to its wall and the room height.

  inch default = mm default × (1 ÷ 25.4); at ≤ chord − w

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Floor strip in front of an opening

  The four corners of the strip of floor in front of a door or window, in room coordinates.

  P(s, o) = origin + u × s + n × o

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Typed corner coordinates

  Reads x,y pairs typed by a person.

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Outline from edge lengths and turns

  Corners of a right-angled outline from the length of each edge and a left or right turn at each corner.

  pᵢ₊₁ = pᵢ + dir × lengthᵢ; dir turns by ±90°

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Outline from typed walls

  Corners and arcs of an outline from typed wall lengths, directions and arc radii.

  next = p + len × (cos θ, sin θ); arc chord = 2 r sin(|sweep| ÷ 2)

  Room outline, walls and openings addons/cabinetcraft/lib/room.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Room outline from a host model, cleaned

  Drops repeated and in-line points from a room outline given by the host app and makes it counter-clockwise.

  drop b when |ab| < 1 or |(b − a) × (c − b)| < 1e-3 × max(1, |ab| × |bc|)

  Room outline, walls and openings addons/cabinetcraft/lib/fromroom.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Host room moved to (0, 0) and rounded

  Shifts the host's outline so its lower-left corner is the origin and converts it to the job unit.

  mm job: round(v × 10) ÷ 10; inch job: round(v ÷ 25.4 × 16) ÷ 16

  Room outline, walls and openings addons/cabinetcraft/lib/fromroom.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Host doors and windows onto the nearest wall

  Puts each door or window of the host model on the room wall nearest its middle, with its offset along that wall.

  s = (p − a)·u; off = |(p − a) × u|; at = clamp(s − w ÷ 2, 0, len − w)

  Room outline, walls and openings addons/cabinetcraft/lib/fromroom.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Room point back in the host's axes

  Converts a point in the room's own axes to millimeters in the host model.

  X = ox + x × k, k = 25.4 for an inch job, else 1

  Room outline, walls and openings addons/cabinetcraft/lib/fromroom.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Island frames

  The origin and axes of each island's front row and back row.

  u = (cos a, sin a), a = rot × π ÷ 180; back row origin = o + u × len

  Cabinet run layout and countertops addons/cabinetcraft/lib/project.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Layout tolerance and largest automatic filler

  The two limits the layout compares against.

  tol = 0.01; maxFiller = conv(75, unit)

  Cabinet run layout and countertops addons/cabinetcraft/lib/project.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• End-face swing of a cabinet on a bay

  How far the end face of a straight cabinet on a curved bay swings toward the neighboring run.

  tilt = d × sin(atan2(w ÷ 2, √(r² − w² ÷ 4)))

  Cabinet run layout and countertops addons/cabinetcraft/lib/project.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Is a corner a right angle

  Decides whether a corner cabinet fits a room corner.

  square when |turn − 90| < 0.01 degrees

  Cabinet run layout and countertops addons/cabinetcraft/lib/project.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Where the later run stops at a corner

  How far short of a room corner a run stops so it clears the run on the other wall.

  stop = flat + tilt(A) + tilt(B) + flat² ÷ (2r); flat = other run's depth at 90°

  Cabinet run layout and countertops addons/cabinetcraft/lib/project.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Wedge filler triangle at an angled corner

  The three corners of the triangular void left where two runs meet at an angle that is not 90 degrees.

  tri = [corner, corner ± u × leg1, corner + n × depth]

  Cabinet run layout and countertops addons/cabinetcraft/lib/project.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Automatic filler width

  The width of the filler that closes the gap between the last cabinet and the end of the span.

  rest = end − start − used; filler = rest when tol < rest ≤ maxFiller

  Cabinet run layout and countertops addons/cabinetcraft/lib/project.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Position of each cell along its run

  The distance from the start of the wall to each cabinet, filler and end panel.

  xᵢ₊₁ = xᵢ + wᵢ; stored xᵢ rounded to 6 decimals

  Cabinet run layout and countertops addons/cabinetcraft/lib/project.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• First cabinet on a curve moved clear of the previous run

  On a curved wall that starts at a room corner, how far the first cabinet is moved along so it does not overlap the previous run's last cabinet.

  bisection on [0, 600 mm], 40 halvings; clash when overlap > 1e-6

  Cabinet run layout and countertops addons/cabinetcraft/lib/project.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Straight countertop length and width

  The length and width of a countertop over a straight run of base cabinets.

  length = x₁ − x₀ + overhang at each open end; width = depth + front overhang + seat

  Cabinet run layout and countertops addons/cabinetcraft/lib/project.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Countertop on a curved wall

  The outline and area of a one-piece countertop that follows cabinets stepped along a curved wall.

  area = |Σ (xᵢ yᵢ₊₁ − xᵢ₊₁ yᵢ)| ÷ 2

  Cabinet run layout and countertops addons/cabinetcraft/lib/project.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Corner cabinet countertop

  The outline and area of the countertop over a corner cabinet.

  area = shoelace of the outline; length = width = √area

  Cabinet run layout and countertops addons/cabinetcraft/lib/project.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Extent of a cell along its wall

  The stretch of wall each cell covers, used to test it against doors and windows.

  curved wall: min and max of (corner − a)·u; straight: [x, x + w]

  Cabinet run layout and countertops addons/cabinetcraft/lib/project.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• End panel height

  The height of an end panel beside a cabinet.

  height = cabinet height − kick height

  Cabinet run layout and countertops addons/cabinetcraft/lib/project.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Wall frame to room coordinates

  Turns a distance along a wall and a distance out from it into a room point.

  p = o + u × s + n × o′

  Cabinet run layout and countertops addons/cabinetcraft/lib/footprint.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Floor footprint of each cell

  The polygon each cabinet and end panel covers on the floor, its bounding box and its height range.

  Cabinet run layout and countertops addons/cabinetcraft/lib/footprint.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• How far two footprints overlap

  The penetration depth of two convex polygons, 0 when they are apart or only touch.

  for each edge normal n: overlap = min(a₁, b₁) − max(a₀, b₀) of the projections; result = smallest overlap

  Cabinet run layout and countertops addons/cabinetcraft/lib/footprint.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Gap between two rectangles

  The distance between two axis-aligned rectangles.

  gap = √(dx² + dy²), dx and dy the clear distances on each axis, 0 when they overlap on it

  Cabinet run layout and countertops addons/cabinetcraft/lib/footprint.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Gap between two sets of convex polygons

  The smallest distance between two footprints made of convex pieces, 0 when they touch or overlap.

  Cabinet run layout and countertops addons/cabinetcraft/lib/footprint.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit

• Numbers read from a G-code line

  Splits a line into its letter and number words.

  G-code dry run and hole check addons/cabinetcraft/lib/dryrun.js

  • CadCraft
  • BimCraft
  • ModelCraft
  • PartCraft
  64-bit