Resources Numerical accuracy

Equality comparisons

Where the code asks whether two decimal numbers are exactly equal. A floating-point result can differ from another in the last digit after a few transformations, so a mesh run through several of them can change the length of an edge, or miss a match. Compare with < or > where a range is meant, and with a documented epsilon where equality is.

316 comparisons to look at
149 files
175 likely to matter (against a decimal, or two computed values)
Scanned November 6, 2026

These are places worth checking, not confirmed bugs. The scan reads how the code is written, not what it is meant to do, so some entries are fine as they are: a test against exactly 0 is often a deliberate guard against dividing by zero. It skips text, counts and indexes, and any comparison it cannot be sure involves decimal numbers, so there are likely more in the code than are listed here.

Against a decimal addons/electrical/main.js:299 in activate CadCraft
```
const u = yes(await c.keyword(t('ask.symlib.units'), { options: [opt('M', t('opt.mm')), opt('I', t('opt.inches'))], default: per === 25.4 || per === 304.8 ? 'I' : 'M' }));
```
=== in per === 25.4. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: Schematic wires, pins and connections.
Against a decimal addons/electrical/main.js:299 in activate CadCraft
```
const u = yes(await c.keyword(t('ask.symlib.units'), { options: [opt('M', t('opt.mm')), opt('I', t('opt.inches'))], default: per === 25.4 || per === 304.8 ? 'I' : 'M' }));
```
=== in per === 304.8. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: Schematic wires, pins and connections.
Against a decimal addons/electrical/main.js:301 in activate CadCraft
```
const scale = u === 'I' ? 25.4 : per >= 10 && per !== 25.4 && per !== 304.8 ? per : 1;
```
!== in per !== 25.4. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: Schematic wires, pins and connections.
Against a decimal addons/electrical/main.js:301 in activate CadCraft
```
const scale = u === 'I' ? 25.4 : per >= 10 && per !== 25.4 && per !== 304.8 ? per : 1;
```
!== in per !== 304.8. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: Schematic wires, pins and connections.
Against a decimal m3d/tools.js:1542 in computeGrips CadCraft
```
if (f.every((x) => x === 0.5)) continue;
```
=== in x === 0.5. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: 3D drawing and editing tools.
Against a decimal m3d/tools.js:1543 in computeGrips CadCraft
```
const mask = f.map((x, a) => x !== 0.5 && live[a]);
```
!== in x !== 0.5. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: 3D drawing and editing tools.
Against a decimal process/env/cheminfo.js:77 in parse CadCraft, BimCraft
```
const sum = atoms.map(() => 0); for (const b of bonds) { sum[b.a] += b.order === 1.5 ? 1 : b.order; sum[b.b] += b.order === 1.5 ? 1 : b.order; }
```
=== in b.order === 1.5. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: Molar mass and group-contribution estimates.
Against a decimal process/env/cheminfo.js:77 in parse CadCraft, BimCraft
```
const sum = atoms.map(() => 0); for (const b of bonds) { sum[b.a] += b.order === 1.5 ? 1 : b.order; sum[b.b] += b.order === 1.5 ? 1 : b.order; }
```
=== in b.order === 1.5. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: Molar mass and group-contribution estimates.
Against a decimal process/env/cheminfo.js:126 in toMol CadCraft, BimCraft
```
mol.bonds.forEach((b) => L.push(pad(b.a + 1, 3) + pad(b.b + 1, 3) + pad(b.order === 1.5 ? 4 : b.order, 3) + '  0'));
```
=== in b.order === 1.5. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: Molar mass and group-contribution estimates.
Against a decimal process/env/cheminfo.js:136 in fromMol CadCraft, BimCraft
```
const sum = atoms.map(() => 0); for (const b of bonds) { const o = b.order === 1.5 ? 1 : b.order; sum[b.a] += o; sum[b.b] += o; }
```
=== in b.order === 1.5. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: Molar mass and group-contribution estimates.
Against a decimal process/env/cheminfo.js:148 in toSvg CadCraft, BimCraft
```
out += b.order === 2 || b.order === 1.5 ? ln(nx, ny) + ln(-nx, -ny) : b.order === 3 ? ln(0, 0) + ln(2 * nx, 2 * ny) + ln(-2 * nx, -2 * ny) : ln(0, 0);
```
=== in b.order === 1.5. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: Molar mass and group-contribution estimates.
Against a decimal process/env/cheminfo.js:179 in groupsOf CadCraft, BimCraft
```
const dbl = nb[i].filter((x) => x.order === 2).length, trp = nb[i].filter((x) => x.order === 3).length, arom = nb[i].some((x) => x.order === 1.5);
```
=== in x.order === 1.5. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: Molar mass and group-contribution estimates.
Against a decimal process/env/dispersion.js:100 in screen CadCraft, BimCraft
```
const notes = ['Stability-class screening on flat ground, one source, no buildings. Ta ' + Ta + ' K' + (Ta === 293.15 ? ' (assumed: give the real ambient temperature)' : '') + '.',
```
=== in Ta === 293.15. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: Stack plume rise and air dispersion screening.
Against a decimal process/env/molsketch.js:106 in fromMolecule CadCraft, BimCraft
```
for (const b of mol.bonds) s.bonds.push({ a: b.a, b: b.b, order: b.order === 1.5 ? 1 : b.order });
```
=== in b.order === 1.5. Compare within a documented epsilon, or test with < or > if a range is meant. Not in the register.
Against a decimal process/env/molsketch.js:114 in kekulise CadCraft, BimCraft
```
const arom = mol.bonds.map((b, k) => ({ k, a: b.a, b: b.b })).filter((e) => mol.bonds[e.k].order === 1.5 && need[e.a] && need[e.b]);
```
=== in mol.bonds[e.k].order === 1.5. Compare within a documented epsilon, or test with < or > if a range is meant. Not in the register.
Against a decimal process/equip/vessel.js:113 in flatHead CadCraft, BimCraft
```
return { t, tMin: t + ca, C, notes: C === 0.33 ? ['C = 0.33 is the plain-plate value; the attachment detail of Figure UG-34 sets the real C (0.17 to 0.33 and others): give it'] : [], source: 'ASME VII
```
=== in C === 0.33. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: Pressure vessel thickness and support formulas.
Against a decimal usd/util.js:60 in floatToHalf CadCraft, BimCraft, ModelCraft, TakeoffCraft, CivilCraft, DetailCraft, PartCraft
```
return sign | (rest > 0.5 || (rest === 0.5 && (r & 1)) ? r + 1 : r);
```
=== in rest === 0.5. Compare within a documented epsilon, or test with < or > if a range is meant. Reviewed: Half floats in USD.
Two computed values addons/cabinet/lib/cutlist/cutlist.js:86 in sameKind CadCraft
```
const sameKind = (a, b) => a.material === b.material && a.thickness === b.thickness && a.length === b.length && a.width === b.width &&
```
=== in a.thickness === b.thickness. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Not in the register.
Two computed values addons/cabinet/lib/cutlist/cutlist.js:86 in sameKind CadCraft
```
const sameKind = (a, b) => a.material === b.material && a.thickness === b.thickness && a.length === b.length && a.width === b.width &&
```
=== in a.width === b.width. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Not in the register.
Two computed values addons/cabinet/lib/draw.js:29 in planEnts CadCraft
```
for (const f of frontsOf(cab, R).filter((g, i, a) => a.findIndex((h) => h.x === g.x) === i)) out.push(rect(f.x * k, D, f.w * k, F));
```
=== in h.x === g.x. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Not in the register.
Two computed values addons/cabinet/main.js:419 in renderPanel CadCraft
```
if (cabs.length) facts = t('panel.facts', { n: cabs.length, pieces: cutList(partsOf(cabs.filter((x) => x.d.u === cabs[0].d.u))).pieces });
```
=== in x.d.u === cabs[0].d.u. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Cabinets along a wall line.
Two computed values addons/cabinetcraft/lib/cutlist/cutlist.js:86 in sameKind CadCraft, BimCraft, ModelCraft, PartCraft
```
const sameKind = (a, b) => a.material === b.material && a.thickness === b.thickness && a.length === b.length && a.width === b.width &&
```
=== in a.thickness === b.thickness. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Cut list sizes, areas and banding lengths.
Two computed values addons/cabinetcraft/lib/cutlist/cutlist.js:86 in sameKind CadCraft, BimCraft, ModelCraft, PartCraft
```
const sameKind = (a, b) => a.material === b.material && a.thickness === b.thickness && a.length === b.length && a.width === b.width &&
```
=== in a.width === b.width. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Cut list sizes, areas and banding lengths.
Two computed values addons/cabinetcraft/lib/draw.js:29 in planEnts CadCraft, BimCraft, ModelCraft, PartCraft
```
for (const f of frontsOf(cab, R).filter((g, i, a) => a.findIndex((h) => h.x === g.x) === i)) out.push(rect(f.x * k, D, f.w * k, F));
```
=== in h.x === g.x. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Cabinet plan, elevation, section and 3D boxes.
Two computed values addons/cabinetcraft/lib/estimate.js:140 in sheetsFor CadCraft, BimCraft, ModelCraft, PartCraft
```
const m = nestJob && nestJob.mats.find((x) => x.material === g.material && x.thickness === g.thickness);
```
=== in x.thickness === g.thickness. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Cabinet job cost estimate.
Two computed values addons/lighting/lib/reports.js:84 in checks CadCraft
```
for (let i = 0; i < spans.length; i++) for (let j = i + 1; j < spans.length && spans[j].u === spans[i].u && spans[j].from <= spans[i].to; j++) {
```
=== in spans[j].u === spans[i].u. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Not in the register.
Two computed values addons/windows/lib/cutlist/cutlist.js:86 in sameKind CadCraft
```
const sameKind = (a, b) => a.material === b.material && a.thickness === b.thickness && a.length === b.length && a.width === b.width &&
```
=== in a.thickness === b.thickness. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Not in the register.
Two computed values addons/windows/lib/cutlist/cutlist.js:86 in sameKind CadCraft
```
const sameKind = (a, b) => a.material === b.material && a.thickness === b.thickness && a.length === b.length && a.width === b.width &&
```
=== in a.width === b.width. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Not in the register.
Two computed values cadcraft.js:506 in rememberView CadCraft
```
if (top && top.cx === v.cx && top.cy === v.cy && top.zoom === v.zoom) return;
```
=== in top.cx === v.cx. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Cursor point and status readouts.
Two computed values cadcraft.js:506 in rememberView CadCraft
```
if (top && top.cx === v.cx && top.cy === v.cy && top.zoom === v.zoom) return;
```
=== in top.cy === v.cy. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Cursor point and status readouts.
Two computed values cadcraft.js:967 in withNextGhost CadCraft
```
if (!was || was.x !== n.x || was.y !== n.y) accessUi?.say(t('access.ghost.next', { what: t('auto.kind.' + n.kind), at: fmtL(n.x) + ', ' + fmtL(n.y) }));   // EG.52: a ghost is said once when it appear
```
!== in was.x !== n.x. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Cursor point and status readouts.
Two computed values cadcraft.js:967 in withNextGhost CadCraft
```
if (!was || was.x !== n.x || was.y !== n.y) accessUi?.say(t('access.ghost.next', { what: t('auto.kind.' + n.kind), at: fmtL(n.x) + ', ' + fmtL(n.y) }));   // EG.52: a ghost is said once when it appear
```
!== in was.y !== n.y. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Cursor point and status readouts.
Two computed values dwg/objects-write.js:659 in insertScale CadCraft, BimCraft, ModelCraft, TakeoffCraft, CivilCraft
```
else if (sx === sy && sx === sz) { w.BB(2); w.RD(sx); }
```
=== in sx === sy. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: DWG object values written and read.
Two computed values dwg/objects-write.js:659 in insertScale CadCraft, BimCraft, ModelCraft, TakeoffCraft, CivilCraft
```
else if (sx === sy && sx === sz) { w.BB(2); w.RD(sx); }
```
=== in sx === sz. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: DWG object values written and read.
Two computed values dwg/table-write.js:71 in insertScale CadCraft, ModelCraft, CivilCraft, DetailCraft, PartCraft
```
else if (sx === sy && sx === sz) { w.BB(2); w.RD(sx); }
```
=== in sx === sy. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Not in the register.
Two computed values dwg/table-write.js:71 in insertScale CadCraft, ModelCraft, CivilCraft, DetailCraft, PartCraft
```
else if (sx === sy && sx === sz) { w.BB(2); w.RD(sx); }
```
=== in sx === sz. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Not in the register.
Two computed values gds.js:133 in gdsEntities CadCraft
```
if (it.k === 'boundary') { if (pts.length > 1 && pts[0].x === pts[pts.length - 1].x && pts[0].y === pts[pts.length - 1].y) pts.pop(); if (pts.length >= 3) ents.push({ type: 'poly', layer: lname, color
```
=== in pts[0].x === pts[pts.length - 1].x. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: GDSII layout read and placement.
Two computed values gds.js:133 in gdsEntities CadCraft
```
if (it.k === 'boundary') { if (pts.length > 1 && pts[0].x === pts[pts.length - 1].x && pts[0].y === pts[pts.length - 1].y) pts.pop(); if (pts.length >= 3) ents.push({ type: 'poly', layer: lname, color
```
=== in pts[0].y === pts[pts.length - 1].y. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: GDSII layout read and placement.
Two computed values libitem.js:1715 in emit CadCraft, BimCraft
```
if (c4 && (c4.x !== c3.x || c4.y !== c3.y || (c4.z || 0) !== (c3.z || 0))) faces.push(q[0], q[2], q[3]);
```
!== in c4.x !== c3.x. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Library item geometry from blocks, meshes and tables, Lengths and units for Library items.
Two computed values libitem.js:1715 in emit CadCraft, BimCraft
```
if (c4 && (c4.x !== c3.x || c4.y !== c3.y || (c4.z || 0) !== (c3.z || 0))) faces.push(q[0], q[2], q[3]);
```
!== in c4.y !== c3.y. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Library item geometry from blocks, meshes and tables, Lengths and units for Library items.
Two computed values libitem.js:1715 in emit CadCraft, BimCraft
```
if (c4 && (c4.x !== c3.x || c4.y !== c3.y || (c4.z || 0) !== (c3.z || 0))) faces.push(q[0], q[2], q[3]);
```
!== in (c4.z || 0) !== (c3.z || 0). Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Library item geometry from blocks, meshes and tables, Lengths and units for Library items.
Two computed values m3d/earcut.js:161 in findHoleBridge CadCraft, TakeoffCraft
```
if (hy <= p.y && hy >= p.next.y && p.next.y !== p.y) {
```
!== in p.next.y !== p.y. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Triangulation of faces with holes.
Two computed values m3d/earcut.js:179 in findHoleBridge CadCraft, TakeoffCraft
```
if (locallyInside(p, hole) && (tan < tanMin || (tan === tanMin && (p.x > m.x || (p.x === m.x && sectorContainsSector(m, p)))))) {
```
=== in p.x === m.x. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Triangulation of faces with holes.
Two computed values m3d/earcut.js:194 in getLeftmost CadCraft, TakeoffCraft
```
if (p.x < leftmost.x || (p.x === leftmost.x && p.y < leftmost.y)) leftmost = p;
```
=== in p.x === leftmost.x. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Triangulation of faces with holes.
Two computed values m3d/earcut.js:217 in equals CadCraft, TakeoffCraft
```
const equals = (p1, p2) => p1.x === p2.x && p1.y === p2.y;
```
=== in p1.x === p2.x. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Triangulation of faces with holes.
Two computed values m3d/earcut.js:217 in equals CadCraft, TakeoffCraft
```
const equals = (p1, p2) => p1.x === p2.x && p1.y === p2.y;
```
=== in p1.y === p2.y. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Triangulation of faces with holes.
Two computed values m3d/earcut.js:247 in middleInside CadCraft, TakeoffCraft
```
if (((p.y > py) !== (p.next.y > py)) && p.next.y !== p.y && (px < (p.next.x - p.x) * (py - p.y) / (p.next.y - p.y) + p.x)) inside = !inside;
```
!== in p.next.y !== p.y. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Triangulation of faces with holes.
Two computed values m3d/model.js:137 in meshGeometry CadCraft
```
if (g && g.v === mesh.v && !mesh.recording) return g.def;
```
=== in g.v === mesh.v. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Face planes, areas, triangles and solid volume, Drawing an edge: welding, splitting and re-facing, Push/pull, move, stretch, follow me and intersect, Arcs, circles, smooth curves, divide and offset, Dimensions and typed sizes in 3D, Groups, placements and the model file, Welding of imported geometry, Smooth shading and texture placement.
Two computed values m3d/model.js:538 in addEdge CadCraft
```
if (stops[i].v === stops[i + 1].v) continue;
```
=== in stops[i].v === stops[i + 1].v. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: Face planes, areas, triangles and solid volume, Drawing an edge: welding, splitting and re-facing, Push/pull, move, stretch, follow me and intersect, Arcs, circles, smooth curves, divide and offset, Dimensions and typed sizes in 3D, Groups, placements and the model file, Welding of imported geometry, Smooth shading and texture placement.
Two computed values m3d/tools.js:1060 in down CadCraft
```
const inSel = this.h.sel.some((x) => x.t === s.t && x.id === s.id);
```
=== in x.t === s.t. Compare within a documented epsilon scaled to the size of the geometry, or restructure so one side is exact. Reviewed: 3D drawing and editing tools.