Tutorials CadCraft help Getting started
What's new in 0.9 (earlier)
Hatches that follow their boundary, layer groups, stacked floors, 2D smart walls with doors and windows, text styles and a formatted text editor, a floating command line, grid snap, ten ways to draw an arc, and the Documents panel.
Written for CadCraft 0.10. The same help is inside the app: press F1.
This is what changed in CadCraft 0.9, compared with 0.8.1. CadCraft is the 2D and 3D drawing app of CadCraft Studio 0.9 and its eight apps. 0.9 finishes plan drafting, adds text styles and a real text editor, and gives you more room on screen.
New
Plan drafting
- Hatches that follow their boundary.
HATCHlinks to what bounds it. Move, rotate or scale the boundary and the hatch and its pattern follow; reshape it and the hatch is worked out again.HATCHEDIT(HE) changes a hatch afterwards and makes or ends the link. See Hatch and fill areas. - Hatch pattern files. At the
HATCHquestionPick internal point, typeF(Pattern file) and choose a.patfile. Only files written to the usual format have been tried. - Layer groups. In Tools on the Layers panel: New group, Add ready-made groups, Group by name, and Find a layer; or type
LAYGROUP(LG). See Organize a drawing with layers. - Stacked floors.
FLOORS(FLR), or Floors… in the More menu of the View group. A viewport on a sheet can show one floor under Floor shown in Properties.FLOORLAYERSturns floors into layers for a file going to someone else. See Stack floors in one drawing. - 2D smart walls, doors and windows.
WALL(WA),DOOR(DR),WINDOW(WN) andDELOPENING. Corners, T joins and crossings are worked out for you. Walls keep a record of how they join, and Properties gets Disallow join at start / at end, a Location line and an editable Length. See Draw 2D walls, doors and windows. - The wall tool on plan walls. Type
WALLRECT,WALLPOLY,WALLARC,WALLTRACE,WALLDIM,WALLOFFSET,WALLSPLIT,WALLGRIDand the rest. They have no toolbar buttons yet. See Wall shapes, cuts, offsets and locks for 2D walls.
Text
- Text styles.
STYLE(ST), or Text style on the Draw toolbar: named styles with a font, height, width factor and slant. See Set the font and size of text with text styles. - A formatted paragraph text editor.
MTEXT,TEXTEDITor a double-click on text opens a box with font, size, bold, italic, underline, strike-through, colour, alignment and the degree, plus-minus and diameter signs, plus OK and Cancel. See Format paragraph text. - A diagram from draw.io XML.
DIAGRAM(T2D) also reads pasted draw.io XML. See Draw a diagram from text. - Thai text in a PDF plot. It printed as question marks before.
More room and drawing aids
- A floating, thinner command line and a compact top area. Drag the command line's grip to float it, drag its top edge for fewer lines, F2F2 opens the history. Settings › CadCraft › Command line and the top area choices have the same settings. See Settings.
- Object snap menu. Right-click Snap in the status bar, or type
OSNAP. - Snap to grid. The Grid snap button in the status bar, or F9F9: picked points go to the nearest grid point when no object snap took the point.
- Arc in ten ways, and Continue. Arc on the Draw toolbar or
ARC: 3-point, the Start/Center/End family and the Center/Start/End family, and Continue (press ReturnEnter at the start point) from the last line, arc or polyline. - The Documents panel.
DOCUMENTS(DOCS) or Documents… in the More menu of the View group: revision, state and check-out for every drawing in a project folder. It opens as a centred dialog. See Documents.
Files
- UK steel sizes. 976 sections in the Standard panel, typed as on drawings (for example
305x165x40 UB). - South African packs (drawing practice and building regulations) as packs of the Building regulations add-on. The numbers are unverified.
- Add-ons for CadCraft, added on demand and off by default: interior lighting design, chip design (HDL to layout), router carving, circuit simulation, roller chain sprockets and Building regulations country packs.
Fixed
- Moving, rotating or scaling a hatch left its pattern behind.
GRIDMOVEcarried a whole plan wall that only starts on the grid line. A wall is now judged by its ends.- The grid showed only inside the drawing limits even with limits off.
- The block list in the side panel scrolls, and a name that is no block lists the blocks that start with it ("Did you mean").
- DXF R12 files that AutoCAD refused ("Unknown group 1001 for table") now open there.
- Very large files (about 70,000 entities and up) failed to open with "Maximum call stack size exceeded".
- DWG files from AutoCAD 2018 and later with a high maintenance version failed to open with "bad BITLONG code 11".
- In the paragraph text box, a new size typed for a selected part keeps the selection.
In every app
Bootstrap tooltips on every control with a hint, a start tip you can close, tab strips that scroll when they do not fit, and a browser tab title that follows the open drawing (<drawing> - CadCraft | CadCraft). Settings › Layout is now a drop-down of two-line choices. The language list in Settings is longer than in 0.8. Live co-editing, Library collections and weight and temperature units are described in the Studio notes.
Honest limits
- Paragraph text has no bullet or numbered lists, tab ruler or justify. Plotted PDFs set text in Helvetica.
- Plan walls are straight, so an arc is drawn as short walls. The community hand check of the wall tool is pending.
- Layer groups are not written in AutoCAD's own format, so AutoCAD shows a flat list. Other programs show all floors together unless you run
FLOORLAYERS. - The Documents panel has not been tried by two people on a real share. Router carving has run on no real machine. The lighting estimate was checked against a photon trace, not another program. Engineering add-ons are checking aids, not a replacement for an engineer's review.
- Languages other than English are machine drafts, and some of the new words are English only.
Earlier: 0.8 and 0.8.1
This is what changed in CadCraft 0.8 and 0.8.1, compared with 0.7. 0.8 (1 November 2026) adds drawing helpers that work from your own drawing, by rules on your computer and with no model, and 0.8.1 (2 November 2026) fixes bugs reported after it.
New
Drawing that finishes your thought
- A ghost shows what comes next. With no command running, a grey dashed ghost shows what your drawing's own patterns say comes next: the next stud at the same spacing, the next step of a stair, the missing wall of a room. Press TabTab to draw it as one undo step, or EscEsc to dismiss it. It looks only at the newest objects, so it stays smooth on a big drawing. Turn it off in Settings › CadCraft or with
AUTOCOMPLETEOff. - The next point while you draw a line. In the middle of
LINEorPLINEthe ghost is the next point: the next step of a stair, the fourth corner of a rectangle, or the point that closes it. Bring the cursor near it and press TabTab, as if you had clicked there. - Pen sketches become precise geometry.
SKETCHFIX: draw rough strokes with a pen, mouse or finger and each one becomes a clean line, circle, arc, rectangle or polyline, snapped to what is already drawn. See Sketch with a pen and get precise geometry. - A photo of a sketch becomes a drawing.
PHOTOSKETCH(PSK) finds the paper in a photo, straightens the perspective, applies the paper size and scale you give, and traces the pen lines onto a layer for each pen color. Lettering is not traced. - Dimension it by rules.
AUTODIM(ADIM) makes chains of dimensions along the sides you choose, an overall size, opening widths, hole diameters and, withGrid, grid spacing. It never repeats a dimension that is already there. - Move a grid line and the set follows.
GRIDMOVE(GM): walls that end on the grid line stretch with it, walls along it, columns, its bubble and tag move, and dimensions on it measure the new spacing. One undo step.
Sheets, details and tags
- Sheets that lay themselves out.
AUTOSHEETtakes your named views (or the separate pieces of the model), picks a paper size and a standard scale, and puts the views on new sheets with a title block and a name-and-scale caption. Everything stays editable. See Lay out sheets for me. - Your firm's details, offered as you draw.
DETAILS(DET) keeps your own detail blocks. When what you select matches one by the words on its layers, block names and notes, the status bar says so; pick it and place it.DETAILS› Share puts your list in your Documents folder and brings in what your team has added. Settings turns the offers off. - Tags on blocks.
TAGSdefines a tag (its kind, the values it may take, the blocks it applies to), sets it on the block references you select, and lists them as a schedule you can save as CSV. The definitions are kept in the DWG. See Tags. - Drawing limits.
LIMITSsets a rectangle for the drawing: the grid fills it and zoom All shows it. The limits show as an outline and are saved in DWG and DXF, with the paper limits. See Set the drawing limits.
Working with other people and other programs
- Turn a markup into a revision.
REDLINEreads the package MarkupCraft writes and lists every change. Accept or reject each with a note; the accepted ones get a revision cloud and a revision log in one undo step, and you save the answers file that closes the markups in MarkupCraft. See Turn a markup into a revision. - Drawings that git and Fossil can merge. With Merge-friendly files on in Settings › CadCraft, every object gets a key that never changes (files are about 10 percent bigger).
cadcraft merge base ours theirsthen merges two people's edits of one DWG or DXF object by object and reports only where two people changed the same thing. See Merge two people's edits of one drawing. - What changed, in words. In History, Compare gives a plain list: where things changed, how big the places are, what was added, removed or changed, and the text that was edited. See Say in words what changed.
- Bearings and angles. Type a direction as a surveyor's bearing such as N45°23'30"E, or in degrees, minutes and seconds, anywhere an angle is asked for; AUNITS sets how angles are shown. See Type and show bearings and angles.
- Your own SHX fonts. Give CadCraft a folder of SHX fonts and text styles that name them are drawn in them, on screen and in plots. See Draw text in your own SHX fonts.
- A diagram from text.
DIAGRAMreads a Mermaid flowchart, a PlantUML component diagram, D2 or a from-to list and draws blocks and connectors you can edit. See Draw a diagram from text. - OLE objects in a DWG.
OLELISTlists the OLE objects a DWG carries that CadCraft cannot place by itself, and places a copy of a picture where you say. See Pictures. - Your calculations stay with the drawing. Calc sheets and design reasons are kept in the DWG with the class table.
Drafting without sight
- Turn on Drafting without sight in Settings (or type
ACCESSand answerOn). CadCraft speaks every command and result through your screen reader, describes the drawing and what is near the cursor, lets you move the cursor and pick points with the keyboard, and plays a sound for each snap and grip. Where your browser can recognize speech on your computer, commands can be spoken. See Draft without sight.
In every app
- Languages. 54 languages; ten are new (Lithuanian, Latvian, Bosnian, Marathi, Telugu, Albanian, Afrikaans, Filipino, Swahili, Uzbek). Languages beyond English are machine drafts until a native speaker reads them.
- Input devices. Trackpad, pen, 3D mouse, game controller and MIDI controls.
- Toolbar rows and the property grid. Settings › General › Toolbar rows offers Wrap, 2 rows or 1 row in the other apps. CadCraft keeps its own setting in Settings › CadCraft (see Toolbar rows). The shared property grid is in three other apps, not in CadCraft.
- Problems, Live and add-ons. A shared Problems panel that warns in every app, a Live view of who is where in CadCraft Studio (see Work on one drawing together), and an add-on listing.
- Connect your AI. One connection from CadCraft Studio to all eight apps, with a read-only, suggest or edit level per app and a plain-words log of what the assistant did. CadCraft has no AI of its own, and Ask in every app uses the AI you connect.
Fixed in 0.8.1
- Properties showed 150 instead of 12'-6" in feet-and-inches drawings. Fields the app reads itself keep their text again.
- DWG files whose classes section was read as the wrong type (GitHub cadcraft#5) now open correctly.
- The crosshair no longer shows behind pop-ups.
- Studio and the packed editions can switch language at run time. Before, they were English only. Not yet tested on every platform: tell us if the language does not change.
- Tablets in portrait give spare grid height to the canvas, and sheets mode starts at 760 px or less.
- STRETCH with a crossing window, and LIMITS, were reported on Studio 0.8.0 and were already right in the 0.8 web build; the reporter's installer was older. Studio 0.8.1 carries them.
Not in this version yet
- 0.8 and 0.8.1 are not code-signed. Windows may warn (choose More info, then Run anyway); on a Mac, right-click CadCraft Studio and choose Open. Store builds are on hold, and the iPad and iPhone build was not rebuilt for 0.8.1.
- Pen sketches and sketch photos have been tried only on made-up photos and a mouse, not yet with a real pen, touch screen or hand sketch on paper.
- Drafting without sight has been tested with automated checks, not yet with a screen reader or a blind tester.
- Sharing details has not had a two-person check, and a Team Cloud Plan folder as the Documents folder is not built.
- Merging works for CadCraft's DWG and DXF files; the same for the other apps' files is not built.
- Undo across windows: CadCraft reports each finished step, but Studio has no single Undo for all apps yet; each app undoes its own steps.
- A DWG's OLE objects are kept but not drawn in place.
- Reading plot style tables (CTB files) from other programs is built but has not been checked against a file from another program.
- Connect your AI: one-click connect in Studio, the hosted connector for browser AI, your own API key inside Studio and the published MCP package are not promised in this release.
For the version before this one, see What's new in 0.7.