Tutorials ModelCraft help Walkthroughs
Send massing to BimCraft
Hand push/pull massing to BimCraft as massing options, with floors, footprint, gross floor area and volume worked out from each solid.
Written for ModelCraft 0.10. The same help is inside the app: press F1.
What you'll do
Turn the blocks you modelled with push/pull into massing options BimCraft understands, so the concept carries on as a building model.
Before you start
Make each mass a group or component and name it. Each one becomes one option. Loose geometry is not sent.
Send it
- Select the groups to send. With nothing selected, every top-level group and component goes.
- Choose Export, then Massing to BimCraft….
- Type the Name of the option set and the Floor height.
- Check the list: each option's floors, footprint, gross floor area and volume.
- Choose Send to BimCraft to open BimCraft in a new tab with the options, or Save as IFC to download the file and open it there yourself.
In BimCraft the options are listed under "Massing options in the model", where one can be made the current option and developed into walls and floors.
How a solid becomes a mass
- Floors are the solid's height divided by the floor height, rounded, and at least one. The floors then share the solid's height equally, so a 10 m block at 3 m floors has 3 floors of 3.33 m.
- A floor's area is the area of the solid's own horizontal section at that floor's level. A block that steps back has smaller upper floors, and the gross floor area is their sum.
- The footprint is the outline of the section just above the solid's base.
- The volume is the solid's own.
In the IFC file each option is a building element proxy (the footprint raised to the solid's height) with one space per floor carrying the floor's gross area. All options share one building, with as many storeys as the tallest option.
Simplified shapes
A plain upright block goes over exactly as modelled. Anything else is still sent, and the list says why its shape is simplified:
- Its floors are not all the size of its base (it steps back or slopes): the mass in BimCraft is the base outline raised to the full height, but the floor areas and the volume are the solid's own.
- The solid is not closed: floors whose section cannot be closed are not measured and count as nothing. Close the solid (Entity info says "Solid: Yes") for full figures.
- Its base has more than one outline: the largest is used as the footprint.
Good to know
- IFC for BimCraft (.ifc) is a different export: it sends shapes and names only, with no floors or areas.
- Nothing is uploaded. The file is handed to the BimCraft tab on this computer.