Tutorials TakeoffCraft help Getting started
What's new in 0.9 (earlier)
Read lengths in meters, centimeters or millimeters, metric areas in m2 with wall area, 1:75 and 1:150 scale presets, weight and temperature units, Arc with ten methods, and live cursors, Follow and a people list.
Written for TakeoffCraft 0.10. The same help is inside the app: press F1.
This is what changed in TakeoffCraft 0.9, compared with 0.8.1. It is a small release for this app: lengths can now be read in meters, centimeters or millimeters, areas and scales follow metric work properly, and Arc has ten ways to draw. Live sessions also show who is where.
New
Read lengths in meters, centimeters or millimeters
- Show lengths as. Settings › TakeoffCraft has Show lengths as with Follow Global, Feet-inches, m, cm and mm. Follow Global uses the metric length unit you starred in Settings › Global › Units, and feet-inches when none is starred. It changes how lengths read on the sheet, in the status bar and in the panels, including heights, depth, thickness and the levels. A bare number typed in a height field is read in the unit shown.
- Display only. Quantities, costs and exports are worked out from the exact lengths. The 1/16, 1/8 and 1/4 inch choice appears only for feet-inches. See Show lengths in meters.
- Weight units. A Typed quantity (no drawing) item can now be in lb, TON, kg or t, and be priced per unit.
- Temperature. Every item has an optional Temperature field in the item editor, typed in degrees C or F. Show temperatures as in Settings › TakeoffCraft offers Follow Global, °C or °F.
Areas and scales for metric work
- Areas in m2 on the drawing. An area measured with a metric item now says m2 on the drawing tag and the mark panel as well as in the table, instead of SF. The rule is m2 when the item is priced in metric or lengths are shown in m, cm or mm, and SF otherwise.
- Wall area. A linear item with a height also shows its wall area (length times height) in the Items list and as a note row under the by-item quantities table.
- Scale presets 1:75 and 1:150. They are in the Preset list in the Scale group, which now has 32 scales. See Scale presets.
Arc with ten methods
- While Arc is on (toolbar button or RR), an Arc method box appears in the sheet bar: 3-Point, Start, Center, End, Start, Center, Angle, Start, Center, Length, Start, End, Angle, Start, End, Direction, Start, End, Radius, Center, Start, End, Center, Start, Angle and Center, Start, Length. Angle, length, radius and direction can be clicked or typed. It works in linear runs, areas and cut-outs. Files saved before 0.9 open the same. See Draw arcs with ten methods.
Working together
- See each other's cursors. In a Live session each person's pointer shows on the sheet with their name and color, with a dashed box round the marks they selected. People on another sheet are listed with that sheet's name. See Work live with others.
- Follow a person, and the people list. The People button in a Live session lists each person with the tool they run, the sheet they are on and when they last edited. Follow moves your view with theirs, and the host can use Ask everyone to follow me. See Follow a teammate in a Live session.
In every app
- Tooltips and the start tip. Hover text is a Bootstrap tooltip, and the start tip can be closed.
- Scrolling tab strips. A panel's tab strip that does not fit scrolls instead of being cut off.
- Tab titles. The browser tab reads
<document> - TakeoffCraft | CadCraft. - Layout. The layout list in Settings is a drop-down that shows the chosen layout.
- Language. The language you choose now reaches the words the page prints itself, such as New, Open and Save. Languages other than English are machine drafts until a native speaker has read them.
Honest limits
- Length display, weight and temperature units and the new presets were checked by tests and in the page. Every panel at every unit has not been checked by hand.
- The people list has not had a hand check with a real class of teacher and students.
- Languages other than English are machine drafts.
- Windows installers are not code-signed (More info, then Run anyway). The macOS disk image is not notarized (right-click, then Open).
Earlier: 0.8 and 0.8.1
This is what changed in TakeoffCraft 0.8 (released 2026-11-01) and 0.8.1 (2026-11-02), compared with 0.7. A symbol legend can now be counted across the whole set at once, a new takeoff can start from the prices of your past jobs, and the takeoff can be checked against a supplier's stock. 0.8.1 is a fix release.
New
Count everything in the set
- Box the legend once. Count everything in the toolbar reads a symbol legend: drag a box around the symbols and the names printed beside them. Each symbol is listed with its picture and name, and the name becomes the item's name. Untick what you do not want, then choose Count on N sheets. A bar shows the sheet being searched, Cancel stops the run, and the page stays usable.
- Every sheet in one run. Each symbol is counted on every open sheet. A sheet drawn at another scale is searched at that scale, and symbols are found turned in any right angle. The legend's own symbols are not counted on its sheet.
- Review before anything is added. Each total has a link per sheet ("E-103: 4") that goes to that sheet. Click a box on a find to leave it out, and click it again to bring it back. The match level (50% to 100%) only filters what was found; nothing is searched again.
- One undo step. Add N marks makes a count item per symbol with a mark on every find. A name that is already a count item of yours is reused. ⌃ZCtrl+Z takes every item and mark back. What you accept also feeds Learned.
- Symbols at any angle. Tick Symbols at any angle before you count to also find symbols turned by an angle that is not a right angle. The search then turns each symbol every 15 degrees, and a symbol that is not round can take up to six times as long.
- What it is. Plain symbol matching on your own sheets, with no trained model, and nothing leaves your computer. On a made-up 200-sheet set it took 9.4 seconds end to end in Chrome on a fast desktop; real plan sets will be slower. See Count everything in the set.
Price memory from your own jobs
- TakeoffCraft remembers your rates. When you save a takeoff, each priced item that is used is remembered by name and type: material rate, labor rate, waste and unit. The last 12 jobs are kept for each name. It is kept on this computer beside the price Library, never inside a takeoff file, and nothing is sent anywhere.
- Start a new takeoff from it. Prices on the toolbar shows, for each item, the last job's rates, the typical rates and the range. Use last or Use typical prices one item, and Price N unpriced items from memory fills every item that has no price yet. Each use is one undo step.
- Older work. Learn from a past takeoff… remembers the priced items of a saved takeoff (.json).
- See it, change it, forget it. Everything remembered lists every name; the trash button forgets one, and Clear all prices forgets all. Turn off Remember my prices when I save a takeoff to stop. A price per each is never put on an item per foot. See Price memory from your past jobs.
Supplier stock and lead times
- Check against a supplier's list. Supply on the toolbar takes a supplier's stock list (Add a supplier file…), a CSV or a spreadsheet, and checks what the takeoff needs, with waste, against it. Up to five files are kept. Nothing is sent and nothing asks a supplier: you bring the file.
- What it says. Short items come first: "Short by 120 EA", "Lead time 21 days", "On backorder", "Unit differs", "No stock figure" or "In stock". Longest wait wanted (days) starts at 14.
- Order list. Order list (CSV) downloads the short items with the amount short, the supplier and the lead time.
- Prices into the Library. If the file has prices, Prices into the Library sets the material price of each Library entry with the same name and unit. Reprice from the Library to bring them into the takeoff.
- In the Problems panel. A shortage is a warning and a long wait is a note, under "Supplier stock". You can accept one with a reason, and the reason is saved in the takeoff. See Check supplier stock and lead times.
AI assistants
- Tools for all three. With assistants allowed in Settings, an assistant can read a legend (
legend_open), run the count (legend_count_start, thenlegend_count_statusandlegend_count_result) and add it (legend_count_add, which can preview first). It can read the remembered prices (prices_list) and price items from them (prices_apply, which can preview first), and read the supplier check (supply_check). Adding a supplier file stays yours to do. See Use TakeoffCraft with AI assistants.
In every app
- Languages. Fifty-four languages in all; ten are new (Lithuanian, Latvian, Bosnian, Marathi, Telugu, Albanian, Afrikaans, Filipino, Swahili and Uzbek). Languages other than English are machine drafts until a native speaker has read them.
- Input devices. Settings › Global › Input devices sets what a trackpad, a mouse's side buttons, a pen, a 3D mouse, a game controller or a MIDI controller does, for every app or for one. See Use a trackpad, 3D mouse or controller.
- Toolbar rows. Settings › General › Toolbar rows offers Wrap (the start), 2 rows and 1 row; groups that do not fit scroll sideways. See Arrange the panels.
- Problems panel. The shared panel of warnings and notes now carries the supplier stock check above, beside the other checks.
- Add-ons. Add-ons follow your account list. See Add-ons and your account list.
- Connect your AI. CadCraft Studio is the hub: connect your assistant once for all eight apps. Studio has no AI of its own.
Fixed in 0.8.1
- DWG classes section. The classes section of a DWG file was read as the wrong type. This is fixed in TakeoffCraft, and in four other apps.
- Studio can change language while it runs. Before, Studio and its packed editions were English only. This has not been tested in the desktop build on every platform; tell us if the language does not change.
Not in this version yet
- Not code-signed. Windows may warn, and on a Mac you right-click and choose Open the first time. The store builds (Microsoft Store, Google Play, App Store) are on hold, and the iPad and iPhone build was not rebuilt for 0.8.1.
- Studio updates. The Windows installer and the Linux packages check once a day and ask first. The portable zip only tells you, and macOS and the APK do not update themselves. The 0.8 macOS .dmg follows the release.
- Connect your AI. One-click connect inside Studio, the hosted connector for AI in the browser, your own API key inside Studio and a published MCP package are not promised in this version.
- Count everything. It needs symbols drawn the same way as in the legend, and a symbol with a wall or long line through it can be missed. Mirrored symbols are not found, and a sheet with no scale that is drawn at another size is searched at the legend's size. Check the finds on the first sheet before trusting the rest.
- Supplier stock. Stock figures are only as current as the file you add. The check never asks a supplier.
- Languages. Tamil's app bar overflows.
Everything else is in Not built yet. For the release before this one, see What's new in 0.7.