Tutorials CadCraft help Walkthroughs

Check what units a drawing is in

See whether an opened drawing is in millimeters, inches or something else, check it by measuring, and know why another program can name different units for the same DXF.

Written for CadCraft 0.10. The same help is inside the app: press F1.

What you'll do

Find out what one unit in an opened drawing stands for, and make sure the numbers you read are the size you expect.

Steps

  1. Open the drawing, then press EscEsc so nothing is selected, on the Model tab.
  2. In the right panel, under Current settings, read Units. It says what one drawing unit stands for: Millimeters, Inches, Feet and so on. A DXF saved from PartCraft says Millimeters.
  3. Check it by measuring something whose size you know. Type DIST and pick the two ends of an edge or a hole. If a part you know is 25 mm reads 25, the drawing is in millimeters; if it reads about 0.98, it is in inches.

Unitless means the file does not say. CadCraft then treats it as the paper's unit (millimeters on ISO paper, inches on US paper), and the numbers are only as right as the program that wrote them.

If the units are wrong

Changing Units resizes nothing: the numbers stay the same and only what they mean changes. So set it only to say what the drawing really is. If the numbers are millimeters and Units says Inches, choose Millimeters. If you need the geometry itself in other units, scale it with SCALE (25.4 from inches to millimeters, 1/25.4 the other way) and then set Units.

How lengths are written (decimal, feet and inches, fractions) is a separate setting, Length format: see Units, paper sizes and scales.

Why another program can say inches

A DXF states its units in its header. The oldest kind of DXF, R12, had no units variable at all, so a program that reads R12 strictly ignores the one written there and falls back to its own default, which is often inches. The geometry in the file is the same either way: only the label differs. PartCraft writes its DXF files as R12 and states millimeters two ways ($INSUNITS 4 and $MEASUREMENT 1) so more programs read them right. If a program still says inches, set its units to millimeters when you open the file.

Bringing a file into a drawing (rather than opening it) converts its units: see Units on import.